LE70 Series 3/4 HP sewage pumps are submersible units built by Liberty Pumps for handling raw sewage and other solids-laden wastewater in residential and light commercial applications. Each pump in the series runs on a 3/4 horsepower motor and passes 2 inch solids, matching it to standard sewage basin and ejector applications rather than clear-water sump duty. The line is built around a cast iron housing with an epoxy powder coat finish and stainless steel fasteners, and it ships in 2 inch or 3 inch discharge configurations with cord lengths available in 10, 25, or 35 foot options. Automatic models pair the pump with an integral float switch, while manual models run off a separate control panel wired into the system. Installers reach for this series when a basement bathroom, laundry room, or other below-grade fixture needs to pump waste up to the main sewer or septic line.
Subcategories
Buying Guide
Start with how the pump will be controlled, since that decision affects which model variant to order. A basin that needs the pump to run entirely on its own calls for an automatic model with the float switch built in, while a duplex setup or any system already tied to a control panel calls for a manual model instead. Pairing a manual pump with a job that has no panel leaves the pump unable to cycle, so confirm panel wiring is already in place or planned before specifying manual. Next, match the discharge size to the existing pipe run. A 2 inch discharge suits most single-bathroom basement ejector setups, while a 3 inch discharge fits higher-capacity basins or light commercial jobs with more fixtures feeding one pit.
The LE70 Series 3/4 HP line handles 2 inch solids, which covers raw sewage and typical waste from toilets, sinks, and laundry, so confirm the application doesn't call for a larger solids-handling pump before specifying this horsepower. Cord length is the last detail worth checking, since the pump needs to reach the junction box or control panel without a splice, and the line ships in 10, 25, and 35 foot options. Voltage also varies across the series, so confirm the electrical service available at the pit before ordering a specific model number.
Frequently Asked Questions
What's the difference between automatic and manual LE70 Series pumps?
Automatic models ship with a wide-angle piggyback float switch already wired to the pump, so the unit starts and stops on its own as wastewater rises and falls in the basin. Manual models leave that control out and need a separate panel to cycle the pump. A duplex system or any job already running off a panel typically calls for the manual version instead of the automatic one.
How much solids handling does the LE70 Series provide?
The LE70 Series handles 2 inch solids, which covers raw sewage and typical waste from toilets, sinks, and laundry fixtures. A 3/4 HP motor powers the pump across the line regardless of discharge size or control type. Applications with larger solids than 2 inch need a different pump line entirely.
What discharge sizes are available on the LE70 Series?
The LE70 Series ships in 2 inch or 3 inch discharge configurations, and the correct choice depends on the pipe run already in place at the pit. A 2 inch discharge covers most single-bathroom basement ejector setups, while a 3 inch discharge suits higher-capacity basins or light commercial jobs with more fixtures feeding one pit. Matching discharge size to the existing plumbing avoids needing a reducer fitting at the pump connection.
What cord length options come with the LE70 Series?
Cord lengths on the LE70 Series come in 10, 25, or 35 foot options, giving some flexibility in how far the pump sits from the junction box or control panel. Choosing a cord long enough to reach without a splice keeps the electrical connection inside the pit as simple as possible. Voltage also varies across the series, so the electrical service at the pit needs to be confirmed alongside cord length.
What is the LE70 Series built from?
The LE70 Series uses a cast iron housing with an epoxy powder coat finish and stainless steel fasteners, built to hold up in a wet, corrosive sewage basin environment over repeated duty cycles. Both automatic and manual models across the 2 inch and 3 inch discharge options share this same housing and fastener construction.