Robertshaw 720 Series Dual Valve Gas Controls are six function combination gas valves built for constant pilot heating equipment, combining a manual valve, safety shutoff magnet, dual automatic valves, main gas regulator, and pilot adjustment in a single body. The 720 Series runs on 24 volts and includes an integral manual selector with four positions, off, on, pilot, and set, letting a technician isolate pilot gas flow during magnet energizing and lockup without shutting down the whole system. A 3-9/16 inch swing radius keeps the valve compact enough to drop into most original equipment cavities, which makes it a common replacement for other six function dual valves already installed in the field. Models ship with or without a factory pressure regulator, and natural gas units come set at 3.5 inch water column, convertible to liquid propane at 11 inch water column with the included regulator kit. Central heating units, space heaters, wall heaters, boilers, and mobile home furnaces all use this valve family, and technicians can mount it in any position except upside down.
Subcategories
Buying Guide
Matching a replacement valve starts with the ignition system already installed on the furnace or boiler rather than the brand stamped on the old part. Standard pilot systems without a soft light off requirement call for the base 720-051, while equipment that bangs or flame rolls out on ignition needs a slow opening model like the 720-050 or 720-070 instead. Two stage burners that require a step in gas flow before reaching full rate call for the 720-055, which carries a 125,000 BTU rating suited to mid size residential and light commercial equipment. Shops that service a mix of intermittent pilot, direct spark, and hot surface ignition systems can standardize on the 720-079 universal valve to cut down on truck stock. Fuel type is the next check. Confirm whether the job runs natural gas or liquid propane before ordering, since Robertshaw 720 Series Dual Valve Gas Controls ship with a natural gas regulator set at 3.5 inch water column by default, convertible to liquid propane at 11 inch water column with the included kit. Physical fit matters too. The 3-9/16 inch swing radius fits most original equipment cavities, but a quick measurement against the existing valve before ordering avoids a return trip. Mounting position is flexible in any orientation except upside down, which covers most furnace and boiler cabinet layouts without additional bracketry.
Frequently Asked Questions
How do I know which Robertshaw 720 valve replaces my old gas control?
Robertshaw 720 Series Dual Valve Gas Controls replace most six function dual gas valves thanks to a 3-9/16 inch swing radius that fits common original equipment cavities. Match the ignition type first, standard pilot, slow opening, step opening, or universal, before checking inlet and outlet pipe size against the old valve. The 720-079 covers intermittent pilot, direct spark, and hot surface ignition in one valve for shops that do not want to stock separate models.
Can a 720 Series valve run on liquid propane?
Yes, Uni-Kit models factory set for natural gas at 3.5 inch water column convert to liquid propane service at 11 inch water column using the included regulator conversion kit. Maximum inlet pressure across these models is rated at 14 inch water column, or one half PSI. Confirming the conversion kit is installed correctly on liquid propane jobs keeps pilot and main burner flame within spec.
What voltage do Robertshaw 720 Series valves use?
Robertshaw 720 Series Dual Valve Gas Controls operate on 24 volts, matching the transformer output found on most residential furnace and boiler control circuits. An integral manual selector offers four positions, off, on, pilot, and set, so a technician can isolate pilot gas flow during magnet energizing and lockup. No separate low voltage transformer swap is needed when replacing an existing 24 volt six function valve.
What is the difference between slow opening and step opening models?
Slow opening models like the 720-050 and 720-070 ramp gas flow up gradually for a softer ignition sound, while step opening models like the 720-055 bring flow up in two distinct stages. The 720-055 carries a 125,000 BTU capacity rating suited to mid size residential and light commercial equipment. Matching the original equipment manufacturer's specified opening sequence keeps combustion clean and avoids flame rollout at light off.
In what orientation can a 720 Series valve be mounted?
Robertshaw 720 Series Dual Valve Gas Controls mount in any orientation except upside down, which covers most furnace and boiler cabinet layouts. Wiring connections, the manual selector, and pressure adjustments stay accessible on top of the valve regardless of mounting angle. Checking the equipment manufacturer's cabinet layout before installation confirms the valve orientation matches the original part.