SKP Gas Actuators are electro-hydraulic devices that open and close gas valve bodies on industrial and commercial burners, providing safety shut-off control at the valve. The SKP15 model operates on 120V and functions as a single-stage, on-off safety shut-off actuator paired with a VG series gas valve body. The SKP25 model adds pressure regulation to the same safety shut-off function, working as a modular unit that mounts onto any VG series valve body from 1/2 inch to 6 inches using four pre-mounted screws. Both actuators open the valve slowly during startup and close immediately whenever power is interrupted, which protects the burner from an uncontrolled gas flow during a fault. Some SKP25 variants, such as a high-pressure version rated to 120 psi, extend the lineup to applications needing tighter pressure control. Selecting the correct SKP model against the valve body size and required control function keeps a burner's safety train working as designed.
Subcategories
Buying Guide
Start by identifying the valve body already installed or specified for the job. SKP Gas Actuators mount only to VG series gas valve bodies, and the actuator's flange size needs to match the valve body size, which ranges from 1/2 inch to 6 inches on modular SKP25 models.
Next, decide whether the application needs pressure regulation or a simple on-off safety shut-off. An SKP15 handles straightforward safety shut-off duty where the valve only needs to open or close. An SKP25 handles both safety shut-off and pressure regulation in one unit, useful where the burner also needs the actuator to hold gas pressure within a set range or act as an air/gas ratio regulator.
Check the supply pressure at the burner before locking in a standard SKP25. Systems running near or above typical ratings should move to a high-pressure variant, such as the 120 psi rated model, rather than risk an underrated actuator on the job.
Confirm what auxiliary monitoring the burner control panel expects. Some actuator models include an auxiliary switch, such as the SKP25.012U1, while others ship with no switch, such as the SKP25.013U1. Matching switch configuration to the panel's wiring saves a later service call. Voltage should also be confirmed, since these actuators are built for 120V circuits.
Frequently Asked Questions
What's the difference between an SKP15 and SKP25 actuator?
An SKP15 provides single-stage, on-off safety shut-off control only, while an SKP25 adds pressure regulation to that same safety function. Burner applications that only need open/close control fit the SKP15, while those needing pressure control fit the SKP25. Both models run on 120V and mount to VG series valve bodies.
What valve bodies work with SKP Gas Actuators?
SKP Gas Actuators mount to VG series gas valve bodies, with SKP25 models covering valve body sizes from 1/2 inch to 6 inches. Four pre-mounted screws secure the actuator to the valve's square flange. Matching actuator flange size to valve body size is required for proper mounting.
When does a job need a high-pressure SKP25 actuator?
High-pressure SKP25 models, such as the SKP25.411U1 rated to 120 psi, fit systems running supply pressure above what a standard SKP25 handles. Checking burner supply pressure before ordering avoids installing an underrated actuator. Construction and mounting otherwise match the standard SKP25 line.
What happens to an SKP actuator when power is interrupted?
SKP actuators close the gas valve immediately whenever power is interrupted, which shuts off gas flow during a fault condition. Opening happens slowly during normal startup, while closing is immediate for safety. Both the SKP15 and SKP25 lines share this fast-closing behavior.
Do SKP actuators come in different switch configurations?
SKP15 and SKP25 actuators are available in multiple model variants, including versions with an auxiliary switch such as the SKP25.012U1. Switch configuration affects what status information feeds back to the burner control panel. Checking the specific model number confirms which switch option is included before ordering.