Sharkbite Slip Couplings are push-to-connect fittings that repair or extend runs of PEX, copper, CPVC, PE-RT, HDPE, and PVC pipe without soldering, clamps, or glue. Built from forged DZR brass, they hold up to 200 psi and 200°F, and only one end carries an internal stop while the opposite end slides freely over a pipe, which lets a plumber cut a repair section into an existing line. Sizes run 1/2 inch, 3/4 inch, and 1 inch, and color coding keeps material compatibility clear: a tan collar fits copper tubing and CTS CPVC or PEX, while a white collar fits PVC pipe up to Schedule 120. Because the design skips solvent welding and torch work, a crew can complete a repair in a wet line without draining or purging the system first. Speed matters most on emergency callouts where downtime on a water line needs to stay short.
Subcategories
Buying Guide
Picking the right slip coupling starts with the pipe material on both sides of the repair. A tan collar coupling fits copper, CTS CPVC, or PEX, while a white collar coupling fits PVC pipe up to Schedule 120, so matching collar color to the pipe in the ground or wall avoids a failed connection. Size comes next, since slip couplings are available in 1/2 inch, 3/4 inch, and 1 inch to match the most common residential and light commercial water line diameters. Pressure and temperature limits also matter on any job. Every size and material option in this line holds the same 200 psi and 200°F rating, so the working conditions of the line, not the coupling itself, usually set the limiting factor. Installation method is worth confirming before a job starts, since one end of a Sharkbite Slip Couplings unit carries a fixed stop while the other slides freely, giving room to work the fitting over a cut pipe end without exact measurement. The sliding action also makes wet line repairs practical, since the fitting can be pushed into place without draining or purging the system first. For a straightforward repair without solvent, solder, or specialty tools, matching collar color, pipe size, and system pressure to the coupling on hand covers most residential and light commercial callouts.
Frequently Asked Questions
What's the difference between the tan and white collar Sharkbite slip couplings?
A tan collar coupling fits copper tubing along with CTS sized CPVC and PEX pipe, while a white collar coupling fits PVC pipe up to Schedule 120. Matching the collar color to the pipe material on the job prevents an incompatible connection. Both collar types share the same 200 psi and 200°F pressure and temperature rating.
Can a Sharkbite slip coupling be installed on a pressurized or wet line?
Sharkbite Slip Couplings use a push-to-connect design that doesn't require solvent, solder, or a torch, which makes them suitable for wet line installation. One end of the coupling slides freely over a cut pipe, so a plumber can work the fitting into place without draining the system first. Even so, the line still needs to be depressurized before cutting the pipe.
What sizes do Sharkbite slip couplings come in?
Sharkbite Slip Couplings are available in 1/2 inch, 3/4 inch, and 1 inch sizes, covering the diameters most common on residential and light commercial water lines. Selecting the size that matches the existing pipe diameter is the first step in any repair. Collar color then narrows the choice to the correct pipe material.
What pressure and temperature can a Sharkbite slip coupling handle?
Sharkbite Slip Couplings are rated to 200 psi and 200°F across the sizes and collar options in the line. The rating covers most residential and light commercial water service applications.
Why does only one end of the coupling slide freely?
One end of a Sharkbite slip coupling carries a fixed internal stop, while the opposite end slides freely over a cut pipe section. The sliding end gives room to maneuver the fitting into place without needing an exact measurement on the repair cut. The fixed end then locks the coupling's position on the other side of the joint.