3 Stage Whole House Water Filter System w/ 20" Sediment, Carbon Block, Iron/Manganese Reducing Filter

Plumber had it installed and up and going in a relatively short time. Only installed yesterday and can already tell the difference.

My customers have been satisfied with these units iI have installed.

I have a well and an existing water softener. Water tests show the softener is removing most of the iron and magnesium but the water still tastes of iron and I get rust stains in my toilets. I sent Supply House my water test results and asked for a recommendation. They suggested this filter and boy does it work. Even though the directions suggested it be located after the softener, I put it before so the filter did the pre-work followed by the softener. My water is now super clear with no metal smell. When you take a shower the water is nice and slippery. Installation was not difficult.

Filter system hook up was simple, removed all E.coli and coliform from the water and passed the water test. System did exactly what it said it was going to do. Would definitely buy again if needed.

I use this to get the iron out of my well water.So far it is doing it.Wondering how long before I have to change the iron filter.

Bought to remove rust in water. Made no perceivable change. Very disappointing. Especially considering the price.

Success! The iSpring WGB32BM is an excellent whole-house, multi-staged, and low maintenance filter set . I installed myself (converted pex to pvc, then back to pex) with bypass and shutoff valves (with existing iSpring sediment filter, see pic). I am on well water, and I chose to put this filter between pump and tank (this is debatable, but since it's fixed media [no backwash], and no other workable location for mounting). I plan to install a pressure gauge on inlet to monitor (from pump). My water quality/report is good, with slightly elevated Manganese; that and iron were causing rust rings and oxidation. Sean at iSpring was very helpful to advise on best solution based on my water characterization, and also provided the heavy-metal filter to use if the iron/mang one was not sufficient. I only wish I had installed this sooner.

Success! The iSpring WGB32BM is an excellent whole-house, multi-staged, and low maintenance filter set. SupplyHouse had good price, shipping, and availability. I installed myself (converted pex to pvc, then back to pex) with bypass and shutoff valves (with existing iSpring sediment filter). I am on well water. Water quality/report is good, with only slightly elevated Manganese; that and iron were causing rust rings and oxidation, and frequent "off" smell from laundry. I chose to put this filter between pump and tank (this is debatable, but since it's fixed media [no backwash], and no other workable location for mounting). I plan to install a pressure gauge on inlet to monitor (from pump). Sean at iSpring was very helpful to advise on best solution based on my water characterization, and also provided the heavy-metal filter to use if the iron/mang one was not sufficient. I only wish I had installed this sooner.

We received the filters quickly and got them installed. We are using the filters in our motorhome and it seems to be working good.