3-Way 18 inch Lead Zone Valves are motorized diverting valves that route hydronic heating water to one of two outlets, and the Honeywell Home V8044 series is the product family behind this category. Resideo lists the V8044 body pattern as three-way diverting, with 18 inch electrical leads, a 20 psi maximum close-off pressure rating, and a fluid temperature range of 40 to 200 degrees F. Models such as the V8044A1044 and V8044A1010 run on 24 volts and use sweat connections, while the V8044E1011 adds an end switch. Port A is normally closed on these valves, and the spring return actuator returns the valve to its normal position when power is removed. Matching pipe size, connection style, and switch option to the existing zone piping matters because a diverting valve that doesn't fit the circuit turns a quick actuator swap into pipe rework.
Subcategories
Buying Guide
Start with the pipe. Confirm the line size and joint style on the zone circuit before comparing actuators. The V8044A1044 is a 3/4 inch sweat valve and the V8044A1010 is a 1/2 inch sweat valve, so a mismatch means extra fittings or a different model.
Next, confirm control voltage. The V8044A1044, V8044A1010, and V8044E1011 are listed as 24 volt valves, so the zone controller or transformer has to supply a matching 24 volt circuit. Check the Resideo documentation for power draw before adding valves to an existing transformer.
Then decide on the end switch. The V8044E1011 includes one, so choose it when the control sequence calls for that feature, and read the wiring instructions before connecting it.
Check the operating limits next. Resideo lists a 20 psi maximum close-off pressure rating and a fluid temperature range of 40 to 200 degrees F for the V8044 series. Compare those numbers with pump head and boiler setpoint on the job.
When comparing 3-Way 18 inch Lead Zone Valves, confirm that port A normally closed matches the piping design, since the valve returns to that position when power is removed. Also measure the distance from the valve to the zone controller, because the factory leads are 18 inches long.
Finally, verify the exact model number, voltage, and connection on the product page before ordering.
Frequently Asked Questions
What does a 3-way zone valve with 18 inch leads actually do?
A 3-way 18 inch lead zone valve is a diverting valve that routes heating water to one of two outlets. Resideo lists the V8044 body pattern as three-way diverting. The 18 inch leads are the factory electrical connection to the actuator.
Are the V8044 3-way zone valves 24 volt?
The V8044A1044, V8044A1010, and V8044E1011 3-way zone valves are listed as 24 volt models. Voltage can differ between valve families, so confirm it in the product title before ordering.
What sweat sizes do the V8044 3-way zone valves come in?
Within these 3-way 18 inch lead zone valves, the V8044A1044 and V8044E1011 are listed as 3/4 inch sweat and the V8044A1010 is listed as 1/2 inch sweat. Check the individual product page for the connection on the exact model.
Can I swap the actuator on a 3-way zone valve without draining the system?
Resideo states that the complete powerhead on the V8044 series can be removed or replaced without breaking plumbing line connections or draining the system. For a 3-way zone valve, follow the manufacturer's installation instructions for the swap.
Which 3-way zone valve has an end switch?
The V8044E1011 3-way zone valve is listed with an end switch. The V8044A1044 and V8044A1010 listings do not mention one. Read the Resideo wiring instructions before connecting the switch.