Apply to be a TradeMaster!
Filter menu expanded

Filters

7 items
Reset

SORT

Product Availability
–

Show In Stock Only (1)

Horse Power
–

1/60 (1)
1/40 (1)
1/30 (2)
1/25 (3)
1/20 (4)
1/15 (2)
1/12 (1)
1/10 (2)

RPM
–

850 (1)
1000 (1)
1050 (1)
1550 (4)

Voltage
–

115V (6)

Speeds
–

2 (1)
3 (3)
4 (1)

Enclosure Type
–

Open (3)
Totally Enclosed (2)

Amperage
–

1.4 (1)
1.8 (1)
2.2 (1)
2.8 (1)
3.3 (1)
4 (2)

Mount
–

Extended Studs (3)
Resilient Base (2)
Resilient Rings (1)
Stud (1)

Rotation
–

CCWLE (1)
CWLE (3)
CWSE (1)

Duty
–

Continuous Air Over (1)

Frame
–

4.4 (7)

Insulation Class
–

A (2)
B (4)

Overload Protection
–

Automatic (6)

Poles
–

4 (1)

Price Range
–

$100 to $200 (1)
$200 to $300 (3)
$300 to $400 (3)

4-5/16 Inch Diameter Motors

Help Face
Need a little help?
7 items
Grid
List
Compare
Product Image of 4-5/16" 1-Speed Double Shaft, Shaded Pole Blower Motor (115V, 1550 RPM, 1/25 HP)
$279.50 each
In Stock
Get 52 by Tue, Nov 24
In Stock
Get 52 by Tue, Nov 24
Compare
Product Image of 4-5/16" 3-Speed Double Shaft, Shaded Pole Blower Motor (115V, 1550 RPM, 1/15, 1/20, 1/25 HP)
$222.32 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 1/10 HP 115v 4.4" Diameter Motor, 850 RPM
$239.39 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 1/12-1/25 HP 115v OEM Replacement Motor, 4.3" Diameter, 1050 RPM, 2 Speed, 1 PH, OAO
$369.49 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 4-5/16" 4-Speed Double Shaft, Shaded Pole Blower Motor (115V, 1550 RPM, 1/20, 1/30, 1/40, 1/60 HP)
$314.29 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 4-5/16" 3-Speed Double Shaft, Shaded Pole Blower Motor (115V, 1550 RPM, 1/10, 1/15, 1/20 HP)
$190.13 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 4-5/16" Diameter Stock Motor (115V, 1000 RPM, 1/20-1/30 HP)
$302.25 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Resources
FAQs, Manuals & Videos
Articles
More About 4-5/16 Inch Diameter Motors

4-5/16 Inch Diameter Motors are shaded pole blower and stock motors from Century, sized around a 4-5/16 inch diameter. Listed models include 115 volt, 60 Hz motors with sleeve bearings and a 3/8 inch diameter shaft. One example is the 1-speed double shaft model rated 1/25 HP at 1550 RPM and 1.4 amps, described as an OEM replacement blower motor. Other listed motors run at 3 or 4 speeds with multiple horsepower ratings, and one stock motor runs at 1000 RPM with a totally enclosed housing. Continuous duty and auto protector features appear in the descriptions of these motors. Contractors turn to this diameter when a failed blower motor has to be replaced and the new motor must match the original in voltage, speed, horsepower, and shaft. Matching those details correctly keeps the repair to one trip and the blower running as designed.

Subcategories

  • 1-Speed Double Shaft Blower Motors: 1-speed double shaft motors are shaded pole blower motors that run at one fixed speed. Contractors use them as direct replacements where the original motor was single speed. One Century model is rated 1/25 HP at 1550 RPM, 115 volts, and 1.4 amps. It is described as an OEM replacement blower motor.
  • 3-Speed Double Shaft Blower Motors: 3-speed double shaft motors give three speeds from one shaded pole motor. Technicians use them for replacements where the original motor offered three speeds. Listed Century examples run at 115 volts and 1550 RPM, with one covering 1/15, 1/20, and 1/25 HP at 2.8, 2.0, and 1.6 amps and another covering 1/10, 1/15, and 1/20 HP at 3.3, 2.4, and 1.7 amps.
  • 4-Speed Double Shaft Blower Motors: 4-speed double shaft motors give four speeds from one shaded pole motor. Contractors use them to replace multi-speed blower motors that need the widest range of speed settings. The listed Century model runs at 115 volts and 1550 RPM and covers 1/20, 1/30, 1/40, and 1/60 HP. Its amp ratings are 1.8, 1.3, .95, and .70 across the four speeds.
  • 2-Speed Stock Motors: The 2-speed stock motor is a capacitor shaded pole motor with a totally enclosed housing. The Century model is rated 1/20 to 1/30 HP at 1000 RPM and 115 volts, with amp draw listed at 2.2 to 1.1. Rotation is listed as CWSE. Contractors check the 1000 RPM rating and rotation against the original motor before ordering.

Buying Guide

Start with the nameplate on the motor being replaced. Voltage, RPM, horsepower, rotation, and speed count should match the original before any other detail matters. The Century models shown here list 115 volts, but speeds and horsepower vary by listing, so check each one rather than assuming.

Next, pick the speed count. A 1-speed motor, such as the 1550 RPM, 1/25 HP model, replaces a single speed original. Multi-speed versions come in 3 and 4 speed designs with several horsepower ratings, so match the number of speeds the original motor used. A 3-speed model, for example, lists 1/15, 1/20, and 1/25 HP.

Check the mechanical details next. The listed motors carry a 3/8 inch diameter shaft and sleeve bearings, and the 1, 3, and 4 speed models are double shaft designs. Rotation matters as well. The 1/25 HP model lists CWLE and the 1000 RPM stock motor lists CWSE, so confirm the rotation of the original before ordering. Enclosure type is another check, since the 1/25 HP model is open and the stock motor is totally enclosed.

When selecting 4-5/16 Inch Diameter Motors, compare amp draw against the circuit protection and controls already in the equipment. Listed amp ratings range from .70 to 3.3 amps across the motors shown. Continuous duty ratings appear on each listing as well.

Frequently Asked Questions

What are 4-5/16 inch diameter motors used for?

4-5/16 inch diameter motors, like the Century models listed here, include shaded pole blower motors. The 1-speed 1/25 HP model is described as an OEM replacement blower motor. Contractors use them to replace failed blower motors when the diameter, voltage, and speed match.

How do I match a replacement 4-5/16 inch diameter motor to the old one?

Match voltage, RPM, horsepower, rotation, and speed count to the original motor. Listings for 4-5/16 inch diameter motors show these details, such as 115 volts, 1550 RPM, and 1/25 HP on the 1-speed model. Rotation is listed too, for example CWLE on that model.

How many speeds do 4-5/16 inch diameter motors come in?

The listed 4-5/16 inch diameter motors include 1, 3, and 4 speed double shaft models and a 2-speed stock motor. The 4-speed Century model lists 1/20, 1/30, 1/40, and 1/60 HP. Check the speed count of the original motor before choosing.

What bearings and shaft size do 4-5/16 inch diameter motors use?

The Century 4-5/16 inch diameter motors shown list sleeve bearings and a 3/8 inch diameter shaft. Their descriptions also list continuous duty and an auto protector. Confirm the shaft size against the old motor before ordering.

Are 4-5/16 inch diameter motors open or totally enclosed?

Both enclosure types appear among 4-5/16 inch diameter motors. The 1/25 HP 1-speed model has an open enclosure, while the 1000 RPM 2-speed stock motor is totally enclosed. Check the enclosure type on the motor being replaced.

Didn't find what you're looking for? 
Let us know
.