Premium Baseboarders are retrofit covers that install directly over existing hydronic baseboard heater enclosures to update their appearance without replacing the heating element underneath. Each cover is built from 22-gauge perforated steel, with a panel height of 6-3/4" and an endcap height of 7-1/2", and the perforated screen hides the original cover while still allowing the heating element to draw and release airflow normally. The one-piece design closes off the top gap on many older baseboard units, which reduces the chance of small objects being pushed inside the heater. These covers are intended for hydronic, hot-water baseboard systems, and manufacturers advise caution when considering them for electric baseboard heaters due to higher surface temperatures on those units. A rental property manager or homeowner refreshing dated baseboard heat gets a cleaner look without opening walls or touching the existing piping.
Subcategories
Buying Guide
Measure the existing baseboard heater run before ordering, since Premium Baseboarders are sold in fixed lengths (2', 3', 5', and 6') meant to retrofit over most existing enclosures rather than being cut to custom size. Confirm the system underneath is hydronic, hot-water baseboard heat, since these covers are built for that application and caution is advised for electric baseboard units that run at higher surface temperatures.
Order wall brackets separately, since the cover itself doesn't include mounting hardware and the two need to be purchased together to complete an installation. Check whether endcaps are included or need to be added to the order, since exposed ends at the 7-1/2" endcap height need a finished piece to look complete and to keep small hands or objects away from the heating element inside. For a job covering more than one wall run, standardizing on a single length across the property, when the existing runs allow it, simplifies future replacement and keeps spare parts interchangeable. Buyers replacing dated or damaged covers should also confirm the perforated steel gauge and finish match what's expected for the space, since a lifetime rust warranty only applies to the manufacturer's original perforated steel panel.
Frequently Asked Questions
Can Premium Baseboarders be installed over existing baseboard heaters?
Yes. These covers are designed to retrofit onto most existing baseboard heater enclosures, updating the appearance without requiring removal of the heating element or piping underneath.
Are Premium Baseboarders safe for electric baseboard heaters?
These covers are intended for hydronic, hot-water baseboard systems. Caution is advised when considering them for electric baseboard heaters, which operate at higher surface temperatures.
Do wall brackets come included with the cover?
No. Wall brackets are sold separately from the baseboard cover and need to be ordered alongside it to complete a mounting installation.
What material are Premium Baseboarders made from?
The covers use 22-gauge perforated steel, with a panel height of 6-3/4" and an endcap height of 7-1/2".
What lengths do Premium Baseboarders come in?
Premium Baseboarders are available in 2', 3', 5', and 6' lengths to match various baseboard heater run sizes.