Brushes and Grit Cloth are the surface prep tools plumbers use to clean copper pipe and fittings before soldering. Oatey Plumber's Abrasive Sandcloth pairs a lightweight cotton-based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings, and other soft metals. The Hercules waterproof open mesh cloth uses 180 grit resin-bonded aluminum oxide and works in wet environments. Fitting brushes clean the inside of copper fittings, such as the Oatey Economy Fitting Brush with a high carbon steel brush, while the Oatey 4-In-1 Brush cleans the outside diameter of copper or plastic tube. Power options include the Mill-Rose 66420, a 3/8 inch ID power copper fitting brush with a 1/4 inch hex shank. Clean, bare metal lets solder flow into the joint, so careful prep protects the quality of every sweat connection.
Subcategories
Buying Guide
Start with the pipe and the joint. Fitting brushes must match the fitting size, so pick the brush diameter that fills the fitting cup. The Oatey 31327 is a 1/2 inch brush, the Mill-Rose 66420 is 3/8 inch ID, and the Mill-Rose 66450 is 3/4 inch ID.
Next, pick the abrasive. Sandcloth like the Oatey Plumber's Abrasive Sandcloth handles cleaning and deburring of copper, and open mesh cloth like the Hercules 180 grit product resists clogging and works in wet environments. Roll size matters too: Oatey 31318 is 1-1/2 inch by 25 yards, and Blue Monster 70152 is 2 inch by 5 yards. Choose the length that fits the job volume.
When assembling Brushes and Grit Cloth for a truck or shop, split the order by task. Keep brushes for fitting cups, a tube brush like the Oatey 4-In-1 for the outside diameter of copper or plastic tube, and cloth for pipe ends. A power brush such as the Mill-Rose 66420 uses a 1/4 inch hex shank, so it needs a drill or driver that accepts hex bits.
Finally, replace worn brushes and used cloth before they stop cleaning. Dull bristles and clogged abrasive leave oxide on the metal, and solder will not wet a dirty surface. A clean prep step costs little compared with a callback.
Frequently Asked Questions
What do plumbers use to clean copper pipe before soldering?
Brushes and Grit Cloth both do the job. Oatey Plumber's Abrasive Sandcloth is made for cleaning copper pipe, fittings, and other soft metals, and fitting brushes such as the Oatey Economy Fitting Brush clean the inside of copper fittings prior to soldering. Cloth handles the pipe end and a brush handles the fitting cup.
What grit is the Hercules open mesh cloth?
The Hercules Waterproof Abrasive Open Mesh Cloth is 180 grit resin-bonded aluminum oxide, designed for cleaning and preparing copper pipe and fittings for soldering. It works in wet environments and is non-clogging. Other Brushes and Grit Cloth products list their own grit, so check each product page.
What size fitting brush do I need for 1/2 inch copper?
The Oatey 31327 is a 1/2 inch copper fitting brush with a plastic handle. Match the brush to the fitting size listed on the product page, since sizing conventions vary by brush. Mill-Rose power brushes list both ID and OD, such as 3/8 inch ID (1/2 inch OD) on the 66420.
Can I use grit cloth in wet conditions?
Open mesh grit cloth like the Hercules Waterproof Abrasive Open Mesh Cloth is described as great for use in wet environments. Brushes and Grit Cloth vary by product, so check the product details for water resistance.
Do power fitting brushes need a special drill?
The Mill-Rose 66420 and 66450 power copper fitting cleaning brushes have a 1/4 inch hex shank. A hex shank fits a drill or driver that accepts 1/4 inch hex bits. Confirm the chuck type before ordering power brushes for the crew.