Hollow Oil Nozzles are oil burner nozzles that atomize fuel oil into a hollow cone spray pattern. Delavan's Hollow-Cone Type A is used mainly on burners with a hollow cone air pattern, and the spray gives good ignition and low noise combustion. The nozzle body is brass or 416 stainless steel, the orifice disc is 416 stainless steel, and the thread is 9/16-24 UNEF. A strainer is part of the Delavan Type A design. SupplyHouse lists Delavan Type A brass models that include the DVA06560 at 0.65 GPH and the DVA60045 at 6.0 GPH. Flow rate and spray angle both have to match the burner specification for the burner to run as designed. Getting the nozzle right on the first visit saves a second trip and keeps the burner firing cleanly.
Subcategories
Buying Guide
Start with the burner nameplate or manual. Burner manufacturers specify nozzle GPH and spray angle, and the replacement has to match both. Replace like for like unless the burner manufacturer approves a change.
Next, confirm the spray pattern. Hollow Oil Nozzles suit burners with a hollow cone air pattern, according to Delavan's Type A description. A burner designed for another spray pattern needs a different nozzle type, so check the pattern before ordering.
Then compare construction. Delavan builds the Type A with a brass or 416 stainless steel body and a 416 stainless steel orifice disc, and the thread is 9/16-24 UNEF. The Delavan DVA models shown on SupplyHouse are titled as brass nozzles, so confirm the body material on the exact part number.
Finally, read the part number. In the DVA series, the product title lists the flow and angle, for example the DVA08580 is a 0.85 GPH, 80 degree nozzle and the DVA06560 is a 0.65 GPH, 60 degree nozzle. Record the GPH and angle on the service ticket so the next visit uses the same nozzle.
Plan nozzle changes around annual service. Swapping the nozzle during that visit and checking combustion afterward keeps the spray pattern consistent with the burner design. A strainer is part of the Delavan Type A design as well.
Frequently Asked Questions
What are hollow cone oil nozzles used for?
Hollow Oil Nozzles such as the Delavan Type A are used mainly on burners with a hollow cone air pattern. Delavan notes the spray gives good ignition and low noise combustion. Always match the burner manufacturer's GPH and spray angle.
How do I read a Delavan DVA hollow nozzle part number?
On SupplyHouse, Delavan DVA hollow oil nozzles list the flow and angle in the product title. For example, the DVA08580 is a 0.85 GPH, 80 degree brass nozzle, and the DVA55045 is a 5.5 GPH, 45 degree brass nozzle. Confirm the details on the exact part before ordering.
What are Delavan Type A hollow nozzles made of?
Delavan's Hollow-Cone Type A nozzle has a brass or 416 stainless steel body, a 416 stainless steel orifice disc and distributor, and a strainer. The thread is 9/16-24 UNEF. The DVA hollow oil nozzles on SupplyHouse are titled as brass nozzles.
Can I swap a 60 degree hollow nozzle for an 80 degree nozzle at the same GPH?
Hollow oil nozzles at the same GPH can carry different spray angles, such as the DVA08560 at 60 degrees and the DVA08580 at 80 degrees, both 0.85 GPH. The angle affects how the spray fits the burner, so follow the burner manufacturer's specification rather than substituting.
What GPH sizes do hollow oil nozzles come in?
Delavan hollow oil nozzles on SupplyHouse include 0.65 GPH, 0.85 GPH, 1.00 GPH, 1.25 GPH, 1.65 GPH, 5.5 GPH, and 6.0 GPH models in the DVA series. Check the product page for the exact size and angle of each part.