Pipe Hooks are hanging hardware that hold pipe in position on a run. The catalog sample shows 1/2-inch hooks from Bluefin and Piers, with a 6-inch length on several models and an 8-inch length on a Bluefin black carbon steel hook. Materials and finishes in the sample include black carbon steel, carbon steel, copper plated and copper coated. Size and length are the first specs to match, since a hook has to fit the pipe it holds and reach the framing or structure it hangs from. Finish is the next choice, and it depends on the pipe type and the look of an exposed run. Pipe support is a small line item on a job, but loose or poorly matched hooks cause rattles, sagging and rework. Choosing the correct hook early keeps the rough-in moving.
Subcategories
Buying Guide
Start with pipe size. The hooks in the catalog sample are listed at a size of 1/2 inch, so confirm that figure against the pipe or tube being hung before looking at anything else. A hook sized for a different pipe will not hold the run the way it should.
Next, pick the length. The sample shows 6-inch lengths from both Bluefin and Piers and an 8-inch length from Bluefin. Measure the distance from the hanging point to the pipe centerline, then choose the length that reaches without leaving excess hook length.
Then choose the finish. When comparing Pipe Hooks, the sample covers black carbon steel, carbon steel, copper plated and copper coated options. Carbon steel options suit general hanging work. Copper plated and copper coated hooks suit runs where the hardware stays visible and a copper look is wanted. Keep the finish consistent across a run so the job looks uniform.
Last, compare brands only after size and length match. Bluefin and Piers both list 1/2-inch by 6-inch hooks in the sample, so the specs can be compared directly. Check each product page for the exact material, finish and any load rating before ordering, since the catalog excerpts here do not list load ratings. A hook that fails after the ceiling is closed in is a costly callback.
Frequently Asked Questions
What sizes do Pipe Hooks come in?
The Pipe Hooks in the catalog sample are listed at 1/2-inch, with lengths of 6 inches and 8 inches. Bluefin lists both lengths in black carbon steel, and the other sampled hooks are 6-inch. Check the product page for other sizes.
What materials and finishes do Pipe Hooks come in?
The sampled Pipe Hooks include black carbon steel and carbon steel, along with copper plated and copper coated finishes. Bluefin lists black carbon steel and copper plated hooks, and Piers lists carbon steel and copper coated hooks. Confirm the finish on the product page before ordering.
How do I choose between a 6-inch and an 8-inch pipe hook?
Pipe Hooks in the sample come in 6-inch and 8-inch lengths. Measure the reach from the hanging point to the pipe centerline and pick the length that covers it. Bluefin lists both lengths in black carbon steel.
Which Pipe Hooks have a copper finish?
Bluefin lists a copper plated 1/2-inch by 6-inch Pipe Hook, and Piers lists a copper coated 1/2-inch by 6-inch Pipe Hook. Both appear in the catalog sample. Check the product page for finish details before ordering.
Do Pipe Hooks list a load rating?
The catalog excerpts for the sampled Pipe Hooks list size and length but no load rating. Check each product page for any rating before ordering. Confirm the load and support needs of the job separately.