Viega MANABLOC Plumbing Packages distribute hot and cold water to every fixture in a home from a single central manifold instead of branching supply lines together throughout the structure. Each manifold includes two cold water main supply ports and one hot water inlet port, along with a 1 and 1/4 inch internal reservoir that helps maintain consistent temperature and pressure across the system. Port counts range from 14 to 36 depending on the size of the home and number of fixtures being served, and connections are available in 3/8 or 1/2 inch sizes to match branch line requirements. Every port includes a quarter-turn shutoff valve, color coded red for hot and blue for cold, so a single fixture can be isolated without shutting down water to the rest of the house. Manifolds carry a rating of 100 PSI at 180 degrees Fahrenheit and a 10 year warranty, giving installers a package built for long-term reliability in a home's primary water distribution system.
Subcategories
Buying Guide
Sizing a manifold package starts with an accurate fixture count for the home, since port counts on these packages range from 14 to 36 and each fixture typically needs its own dedicated port. Undercounting fixtures during the planning stage means running out of ports mid-installation, while oversizing adds unnecessary cost and a larger manifold footprint than the mechanical space requires. Connection size comes next. Branch lines run in either 3/8 or 1/2 inch sizes, and matching connection size to the fixture being served, such as a smaller line for a lavatory versus a larger line for a tub filler, keeps flow rate consistent throughout the house. Every Viega MANABLOC Plumbing Packages option includes color coded quarter-turn shutoff valves on each port, which simplifies isolating a single fixture for repair without shutting down water to the rest of the home, so confirming a valve key ships with the package saves a service call later. Pressure and temperature rating also matter for compatibility with the rest of the plumbing system; manifolds in this category carry a 100 PSI at 180 degree Fahrenheit rating and a 10 year warranty, which should align with the ratings of the water heater and fixtures being installed. Finally, confirm available space in the mechanical room or utility closet, since higher port count manifolds take up more wall space than a compact low port count package.
Frequently Asked Questions
How many ports does a Viega MANABLOC manifold have?
Port counts on Viega MANABLOC manifolds range from 14 to 36 depending on the package selected. Matching port count to an accurate fixture count during the planning stage prevents running short mid-installation. Larger homes with more bathrooms and appliances typically call for a package toward the higher end of that range.
What connection sizes are available on a MANABLOC system?
MANABLOC manifolds accept 3/8 or 1/2 inch connections, letting installers match branch line size to the fixture being served. A smaller line often suits a lavatory while a larger line suits a tub filler or other higher flow fixture. Mixing connection sizes across the same manifold is common depending on fixture demand.
Can a single fixture be shut off without turning off water to the whole house?
Every port on a MANABLOC manifold includes its own quarter-turn shutoff valve, color coded red for hot and blue for cold. Isolating a single fixture for repair only requires closing that one valve rather than shutting down the main water supply. A valve key ships with every package for operating the shutoffs.
What pressure and temperature rating do MANABLOC manifolds carry?
MANABLOC manifolds carry a rating of 100 PSI at 180 degrees Fahrenheit. Confirming that rating lines up with the water heater and fixtures being installed keeps the whole system within its intended operating range. The manifold also comes with a 10 year warranty.
What is the internal reservoir on a MANABLOC manifold for?
The internal reservoir measures 1 and 1/4 inches and helps maintain consistent temperature and pressure as multiple fixtures draw water at the same time. Without that reservoir volume, running a dishwasher and a shower simultaneously could cause noticeable pressure or temperature swings. The reservoir sits between the hot water inlet and the distribution ports feeding each fixture.