Draft Controls are regulators that manage draft on oil, gas, wood and coal-fired furnaces and boilers. The listed Field Controls models include the 4" and 5" RC, designed for settings from .02" to .08", and the 6" M, designed for settings from .01" to .1". Field Controls furnishes the RC as standard equipment on many brands of oil or coal-fired heating equipment. Double acting models such as the 4" MG-1 serve gas-fired furnaces and boilers, including conversion burner installations and appliances with draft inducers or sidewall power venters. The 10" M+MG2 covers solid fuel, oil and gas appliances in large residential, commercial and industrial applications. Matching the regulator to the fuel, the appliance and the manufacturer's specified setting is what makes a draft control job last, so model selection deserves a careful look before ordering.
Subcategories
Buying Guide
Start with the fuel. The RC is listed for wood, oil or coal, and the M is recommended for oil or coal-fired residential heating. The MG-1 is a double acting control for gas-fired furnaces and boilers, and the M+MG2 covers solid fuel, oil and gas appliances.
Next, match the setting range to the appliance. The RC is designed for settings from .02" to .08", and the M is designed for settings from .01" to .1". Use the furnace or boiler manufacturer's specified draft as the target.
Then consider the application. When comparing Draft Controls, note that the MG-1 is widely used for conversion burner installations, gas draft-induced operation with mechanical draft inducers and sidewall power venters. Field Controls also recommends it for gas atmospheric appliances where a draft hood cannot be installed. The M+MG2 suits large residential, commercial and industrial applications, and in a gas installation the double acting M+MG2 is specified instead of a draft hood.
Also confirm size. Listed sizes include 4", 5", 6" and 10", so match the size to the appliance requirements before ordering.
Finally, plan the adjustment. The RC is so sensitive that instrumentation should be used when adjusting the unit during installation. The M has an infinitely variable screw adjustment that permits an extremely fine instrument setting. Have instruments on hand for the install.
Frequently Asked Questions
What is a draft control used for?
Draft controls are regulators that manage draft on oil, gas, wood and coal-fired furnaces and boilers. The Field RC, for example, is calibrated for easy adjustment to the furnace or boiler manufacturer's specifications.
Which draft control works on gas appliances?
The Field Controls 4" MG-1 is a double acting gas draft regulator for gas-fired furnaces and boilers. It is also recommended for gas atmospheric appliances where a draft hood cannot be installed.
What setting range does the RC draft control cover?
The Field RC draft regulator is designed for settings from .02" to .08". It is sensitive, so instrumentation should be used when adjusting it during installation. The 4" and 5" sizes are listed.
Can one draft control handle multiple fuels?
The 10" Field Controls M+MG2 draft control provides draft regulation for solid fuels, oil, gas, or oil/gas appliances. Draft controls like the M+MG2 are used on large residential, commercial and industrial applications.
What's the difference between the RC and M draft regulators?
The RC is designed for settings from .02" to .08", while the M is designed for settings from .01" to .1". The M has an infinitely variable screw adjustment for fine instrument settings, and it is recommended for oil or coal-fired residential heating.