Emerson Flow Controls Temperature and Pressure Controls are switching devices that open or close an electrical circuit, such as a contactor, relay, fan, or motor circuit, in response to a sensed refrigerant or system pressure. Sold under both the White-Rodgers and Emerson brand names, the range covers single and dual pressure switches, mini pressure controls, and industrial rated controls used across HVAC and commercial refrigeration equipment. A single pressure switch, such as the PS1, handles one setpoint on a single circuit, while a dual unit, such as the PS2, combines high and low pressure protection in one housing, cutting down the number of separate controls a technician has to mount and wire on a rack or condensing unit. Choosing the correct control protects compressors from operating outside a safe pressure range and keeps the control circuit from energizing equipment during a fault condition, which matters on every service call involving compressor protection wiring, whether the job calls for a compact mini control or a heavier duty industrial rated switch.
Subcategories
Buying Guide
Selecting the right Emerson Flow Controls Temperature and Pressure Controls starts with deciding whether the application needs single point switching or combined high and low pressure protection. A single pressure switch like the PS1 covers one setpoint and suits jobs where only one fault condition, such as a low suction pressure cutout, needs monitoring. A dual switch like the PS2 combines high and low pressure protection in one housing, which saves panel space and wiring time on compressor circuits that need both types of protection. Check available panel or enclosure space next; the PSC Series mini pressure control fits tighter mounting areas than a standard sized switch, making it a better fit on smaller refrigeration equipment. For heavier duty applications, such as commercial or industrial refrigeration systems with higher switching loads, the FF444 Series industrial control is built to handle duty cycles beyond what a residential or light commercial switch is rated for. Match the electrical rating of the switch's contacts to the load being controlled, whether that's a contactor coil, a relay, or a fan motor circuit, since undersizing the contact rating shortens the control's service life. Confirm the sensed pressure range of the control matches the refrigerant and system design pressure on the equipment being serviced, and keep in mind that these controls are sold under both the White-Rodgers and Emerson brand names depending on the specific model line.
Frequently Asked Questions
What's the difference between a single and dual pressure switch in this line?
A single pressure switch, such as the PS1, monitors and switches on one pressure setpoint. A dual pressure switch, such as the PS2, combines high and low pressure protection in a single housing. Choosing between them depends on whether the compressor circuit needs one fault condition monitored or both high and low protection at once.
When would a mini pressure control be the right choice?
The PSC Series mini pressure control is built for equipment where a standard sized switch won't fit the available panel or enclosure space. Technicians choose mini controls on smaller refrigeration equipment where mounting room is limited. The compact housing still switches the same type of electrical loads as a larger control.
What makes an industrial pressure control different from a standard one?
The FF444 Series industrial control is rated for heavier duty cycles and electrical loads than a standard residential or light commercial switch. Industrial controls are specified on commercial and industrial refrigeration systems with switching demands beyond typical HVAC equipment. They still respond to sensed system pressure the same way a smaller control does.
Are these controls sold under the White-Rodgers name, the Emerson name, or both?
Temperature and pressure controls in this line are sold under both the White-Rodgers and Emerson brand names. The specific model line determines which brand name appears on the control and its documentation. Both names cover the same underlying product range, from single pressure switches up through industrial rated controls.
What electrical loads do these pressure controls switch?
Pressure controls in this line switch electrical loads such as contactors, relays, fans, and motors in response to a sensed refrigerant or system pressure. Matching the switch's contact rating to the specific load being controlled protects the control from premature failure. The same check applies whether the control is a single switch, a dual switch, a mini control, or an industrial rated unit.