| Frequency: | 60 Hz 60 Hz 60 Hz |
|---|---|
| Material: | Stainless Steel |
| Application: | Heating |
| Type: | 1-Speed Pump |
| Horse Power: | 1/12 |
| Voltage: | 115V |
| Connection Type: | Flanged x Flanged |
| Max Flow (GPM): | 20.7 |
| Flow Range (GPM): | 0-20.7 |
| Max Head (Ft): | 9.84 |
| Phase: | 1 |
| Poles: | 2 |
| Head Range (ft.): | 0-9.84 |
| Hertz: | 60 |
| Mount: | In-Line |
Yes, you can use clip on aquastat wither part# 595656 for 1/2" pipe or 595657 for 3/4" pipe
It is to hard to say for sure but there is a chance the pump may be ruined by running it dry. The only thing to do is try to get the air out of the pump and make sure the shaft is turning freely. If that doesn't fix the issue then the whole pump will need to be replaced.
No, this pump model does not include an integrated flow check.
i show this is the direct replacement. http://www.supplyhouse.com/Grundfos-59896771-UP15-29SF-1-Speed-Circulator-Pump-1-12-HP-115-volt-12748000-p
Flange gaskets are included with the circulator.
Yes, this pump comes with flange gaskets.
The pump will come with gaskets. John Easterling Mechanical Engineer Heliocentric