Semiconductor Cartridge Fuses are fast-acting fuses sold in several styles, including Class aR ferrule types, high speed blade and stud types, and cylindrical designs. One example is the Eaton Bussmann 32 amp Class aR fuse, rated 280 VAC and 150 VDC with a 200 kA RMS symmetrical rating. Another is the Mersen A70P30-1, a 30 amp cylindrical fuse rated 700 VAC and 650 VDC. The category also includes a fast-acting 11 amp fuse made only for multimeters, which shows how widely the products differ in purpose. Contractors and technicians need to read the voltage, amperage and kA rating on every product page, because a fuse that fits the holder can still be wrong for the circuit. Matching those ratings and the physical style to the original application is what makes a replacement a safe one.
Subcategories
Buying Guide
Start with the fuse being replaced and match its class, voltage rating, amperage and physical style before weighing anything else. Four details narrow the field faster than brand does.
Voltage comes next. Listed examples include 280 VAC and 150 VDC on the Eaton Bussmann 32 amp Class aR fuse and 1000 VAC on the FWH series 225 amp fuse. Confirm whether the circuit is AC or DC, because the AC and DC ratings on one fuse can differ. The FWH fuse, for example, is rated 1000 VAC and 800 VDC, with 200 kAIC at 1000 VAC and 50 kAIC at 500 VDC.
Physical style is the next filter. Ferrule ends, blade ends with a stud, and cylindrical bodies all appear in this category, so confirm the holder or block accepts the style. The Mersen A70P30-1 measures 50.8 mm in overall length and 14.2 mm in diameter, so confirm those dimensions against the holder. When comparing Semiconductor Cartridge Fuses, also check that the kA rating meets the installation's requirements.
Finally, keep purpose in mind. The 11 amp multimeter fuse is a supplemental fuse and isn't intended for branch circuit protection, so it doesn't belong in a general circuit. When a label is unreadable, check the equipment manufacturer's documentation before choosing a substitute.
Frequently Asked Questions
What's the difference between AC and DC ratings on semiconductor cartridge fuses?
Semiconductor cartridge fuses can carry separate AC and DC voltage ratings. The Mersen A70P30-1 is listed at 700 VAC and 650 VDC, and the Eaton Bussmann 32 amp Class aR fuse is listed at 280 VAC and 150 VDC. Match the rating to the type of circuit the fuse will serve.
Can I use a multimeter fuse as a branch circuit fuse?
No. The Eaton Bussmann 11 amp fast-acting fuse is described as a supplemental fuse for multimeters only, not for branch circuit protection. Other semiconductor cartridge fuses carry their own ratings, so confirm the application before substituting any of them.
What fuse styles are in the semiconductor cartridge fuses category?
The semiconductor cartridge fuses category includes ferrule end Class aR fuses such as the FWA series, blade end fuses with a stud such as the FWH series, and cylindrical fuses such as the Mersen A70P30-1. Check the end style against the holder or block before ordering.
Does the kA rating change between AC and DC on a semiconductor fuse?
It can. The FWH series 225 amp fuse in the semiconductor cartridge fuses category lists 200 kAIC at 1000 VAC and 50 kAIC at 500 VDC. Always read each figure alongside the voltage it's tied to.
How big is the Mersen A70P30-1 cylindrical fuse?
The Mersen A70P30-1 is a 30 amp cylindrical fast-acting fuse in the semiconductor cartridge fuses category. It measures 50.8 mm in overall length and 14.2 mm in diameter. It's rated 100 kA at AC and DC.