Squire indirect water heaters use a boiler's heating loop, rather than a gas burner or electric element built into the tank, to heat domestic hot water through an internal heat exchanger coil. The boiler circulates hot water or a glycol mix through the coil, transferring heat to the potable water stored in the tank without the two ever mixing. Squire is manufactured by Lochinvar, and the stainless steel tank construction is built to pair with a residential or light commercial boiler already installed for space heating. Contractors add one of these tanks to a home or building that already has a boiler for heat, letting that single heat source cover both space heating and domestic hot water instead of running a separate water heater. Recovery speed and standby efficiency both depend on matching tank size to the boiler's output and the building's hot water demand.
Subcategories
Buying Guide
Start with the boiler already installed, since an indirect water heater only performs as well as the heat source feeding it. Confirm the boiler has enough spare output beyond its space-heating load to also recover the water heater's tank in a reasonable time, and check whether the boiler and its controls already support a dedicated domestic hot water zone or whether that needs to be added.
Tank capacity and coil configuration come next. Squire Indirect Water Heaters are available in a range of storage sizes, and matching capacity to actual peak demand, not just the building's square footage, keeps the tank from running short during simultaneous showers or a full load of laundry. A single-coil tank covers most residential jobs, while a dual-coil design is worth considering only when a solar thermal loop or a second heat source is already part of the plan.
Piping and control compatibility round out the decision. Confirm that the boiler's existing zone valves, circulators, and aquastat controls can accommodate an added domestic hot water zone, since retrofitting an indirect tank onto a boiler that wasn't originally set up for one may call for additional controls. Getting this piping and control work right up front avoids a callback over inconsistent hot water recovery.
Frequently Asked Questions
How does an indirect water heater differ from a standard gas or electric water heater?
An indirect water heater has no burner or heating element of its own. Instead, it relies on a boiler's heating loop, circulated through an internal coil, to heat the stored water. That makes it dependent on the boiler being sized and controlled correctly rather than working as a standalone appliance.
Can a Squire indirect water heater be added to an existing boiler?
Yes, as long as the boiler has enough spare capacity beyond its space-heating load and the piping can accommodate a dedicated domestic hot water zone. Older boiler and control setups may need additional zone valves, a circulator, or an aquastat to integrate the tank properly. Confirming boiler output before adding the tank avoids a system that can't keep up with demand.
What's the advantage of a dual-coil tank over a single-coil model?
A dual-coil tank allows a second heat source, such as a solar thermal loop, to work alongside the primary boiler connection. That's only useful when a second heat source is actually part of the system design. For a straightforward boiler-only setup, a single-coil tank is simpler to install and service.
How do I know what tank size to choose?
Match stored volume and recovery rate together against the building's realistic peak hot water demand, not just square footage or bedroom count. A tank that's undersized for peak demand runs out of hot water even if the boiler feeding it is properly sized. Working from an actual fixture count and usage pattern gives a more reliable sizing result than a rule of thumb.
Who manufactures the Squire line?
Squire indirect water heaters are manufactured by Lochinvar. The stainless steel tank construction is built to pair with a residential or light commercial boiler for combined space heating and domestic hot water production.