| Amperage: | 1.5 |
|---|---|
| Application: | Single-Stage (Heat/Cool) |
| Stages: | 1 Heat/1 Cool |
| Programmability: | 5-2 Day Programmable |
| User Interface: | Push Button |
| Mount: | Horizontal |
| Options: | Fan Control |
| Power Method: | Battery |
| Changeover: | Manual |
| Temperature Range (F): | 45°F - 90°F |
| Voltage: | Low voltage 24V |
| Wattage: | 1.5 to 45 |
| Wiring: | O W G B Rh Y Rc |
| Color: | White |
| Height: | 3-3/4" |
| Width: | 5-1/8" |
| Depth (Inches): | 1-1/8" |

Please refer to the following Installation Instructions from the manufacturer: http://s3.pexsupply.com/manuals/1249544570102/White_Rodgers_1F78-151_Instructions.pdf
You can re-enter hold mode by pressing the 'Hold' button. This allows you to override any programmed temperatures indefinitely. Pressing 'Run' returns the thermostat to its program schedule.
The compressor should exit lockout mode automatically after 3-5 minutes.
This thermostat has a differential of about 1 °F.
We would recommend that you check your wiring and the outdoor unit.
It is generally recommended to use the "auto" button for air conditioning.
Yes, the following Installation Instructions should contain all the information you need: http://s3.pexsupply.com/manuals/1249544570102/White_Rodgers_1F78-151_Instructions.pdf
You may need to make some modifications to the wiring. Please refer to the following Installation Instructions for more information: http://s3.pexsupply.com/manuals/1249544570102/White_Rodgers_1F78-151_Instructions.pdf
We would recommend jumping out the thermostat to make sure there is not an issue with the wiring or the control on your AC unit.
The "Hold" button allows users to lock the thermostat at a certain temperature. The "Run" button unlocks the thermostat and returns it to its normal programmed schedule.