5-5/8 Inch Double Shaft Fan/Blower Motors are permanent split capacitor motors rated for air over duty on blowers and fans. Century motors in this group include 1/15, 1/8, 1/6, and 1/4 HP ratings, with 115V and 208/230V options. Listed speeds include 1075 RPM and 1625 RPM. The 1/15 HP and 1/6 HP motors list CCWLE rotation. Listings describe them as single phase, 60 Hz motors with sleeve bearings, a 48 frame, and automatic overload protection. Mount styles listed include resilient ring with extended studs and resilient rings. HVAC techs replace these motors when one fails on a blower or fan. Voltage, horsepower, RPM, rotation, and mount style all have to match the original application, so the specifications on each listing deserve a close read before ordering. A correct match helps keep the repair to a single trip and the equipment running as designed.
Subcategories
Buying Guide
Start with the nameplate on the motor being replaced. Match voltage, horsepower, and RPM first, since those three specs separate one listing from the next. Horsepower ratings in this group include 1/15, 1/8, 1/6, and 1/4. The 1/4 HP motors show the point, with one listed at 1075 RPM and another at 1625 RPM, both on 208/230V. Next, confirm the supply voltage. Listings include 115V and 208/230V options, so a 115V motor will not replace a 208/230V motor on the same circuit. Check rotation as well. The 1/6 HP and 1/15 HP listings show CCWLE rotation, and rotation has to match the blower or fan. Review the mount next. Listed mounts include resilient ring with extended studs and resilient rings, so compare them against the existing motor. Mount style affects whether the replacement bolts into the existing bracket, so confirm it before the old motor comes out. When choosing among 5-5/8 Inch Double Shaft Fan/Blower Motors, confirm the duty too. The listings shown here carry an air over duty rating. Finally, check bearings and frame. The listings show sleeve bearings and a 48 frame. If the original motor differs on any of these points, verify the fit with the SupplyHouse team before ordering. Have the nameplate details ready when asking so the check goes faster.
Frequently Asked Questions
What voltages do 5-5/8 inch double shaft fan/blower motors come in?
5-5/8 inch double shaft fan/blower motors in this group include 115V and 208/230V listings. The 1/15 HP motor is 115V, and the 1/8, 1/6, and 1/4 HP motors are 208/230V. Confirm supply voltage before ordering.
What horsepower ratings are listed for 5-5/8 inch double shaft fan/blower motors?
5-5/8 inch double shaft fan/blower motors in this group are listed at 1/15, 1/8, 1/6, and 1/4 HP. The 1/4 HP motors are listed in both 1075 RPM and 1625 RPM versions. Match horsepower and RPM to the motor being replaced.
Are these 5-5/8 inch motors permanent split capacitor type?
Yes, the 5-5/8 inch double shaft fan/blower motors shown here are listed as permanent split capacitor motors. They are single phase and 60 Hz, with automatic overload and sleeve bearings.
What mount do 5-5/8 inch double shaft fan/blower motors use?
For 5-5/8 inch double shaft fan/blower motors, listings show a resilient ring with extended studs on the 1/8 HP motor and the 1625 RPM 1/4 HP motor, and resilient rings on the 1/15 HP motor. Compare the mount against the existing motor before ordering.
Which 5-5/8 inch motor is a 1/4 HP 208/230V option?
5-5/8 inch double shaft fan/blower motors at 1/4 HP are listed in two speeds, 1075 RPM and 1625 RPM, both 208/230V. The 1075 RPM motor lists CCWLE rotation. Check rotation and speed against the original motor.