Apply to be a TradeMaster!
Filter menu collapsed

ABS DWV Fittings

Help Face
Need a little help?
374 items

Pipe Fittings & Nipples

View All
90° Elbows (H x H)
90° Street Elbows (SPG x H)
45° Elbows (H x H)
45° Street Elbows (SPG x H)
Male Adapters (SPG x MIPT)
Male Adapters
(H x MIPT)
Tray Plug Adapters
Swivel Adapters
Female Flush Adapters
(SPG x FIPT)
Female Adapters (SPG x FIPT)
Female Adapters (H x FIPT)
Repair Couplings (H x H)
Trap Adapters
(H x SJ)
Flush Bushings (SPG x H)
Couplings (H x H)
Soil Pipe Adapters
Trap Adapters (SPG x SJ)
90° Long Turn Street Elbows (SPG x H)
90° Elbows with Side Inlet (H x H x H)
22-1/2° Elbows
45° Wyes (H x H x H)
45° Wyes (SPG x H x H)
Sanitary Tees
(H x H x H)
Test Tees
Street Tees
(SPG x H x H)
Long Radius
Tee-Wyes
(H x H x H)
Caps
Plugs
45° Double Wyes (H x H x H)
Closet Flanges
60° Elbows
Sanitary Tees with 90° Inlet (Hub)
Return Bends
P-Traps
Cleanout Plugs
Double Sanitary Tees (Hub)
22-1/2° Street Elbows
45° Reducing Wyes (H x H x H)
60° Street Elbows
90° Long Turn Elbows (H x H)
90° Vent Elbows (H x H)
Cleanout Tees (Hub)
ABS DWV Double Elbows
ABS DWV Double Fixture Tees
Double Sanitary Tees with 90° Inlet (Hub)
Test Caps
Test Wedges & Tools
Testrite Tees
ABS DWV Vent Tees
Select Sizes:
Resources
FAQs, Manuals & Videos
Articles
More About ABS DWV Fittings

ABS DWV fittings are the elbows and adapters used to route and connect acrylonitrile-butadiene-styrene pipe in residential and commercial drain, waste and vent systems. The listing includes Nibco 1-1/4 inch hub ABS 90 degree elbows, 45 degree elbows, spigot x hub street elbows and male adapters that convert a solvent weld connection to a threaded one. ABS is resistant to a wide variety of materials, from sewage to commercial household chemical formulations. Elbows change the direction of flow, so the angle matters as much as the size. Nibco refers installers to its technical data sheets and catalogs for engineering and installation information. Matching the angle, the end connections and the pipe size before cutting keeps a DWV rough-in on schedule and avoids return trips to the supply counter. Choosing correctly at the start matters because a wrong fitting on a drain line means a cut-out and a redo.

Subcategories

  • 90 Degree Elbows: A 90 degree elbow changes the direction of flow in a drain, waste or vent line. Nibco's 1-1/4 inch hub ABS DWV 90 degree elbow is used in residential and commercial drain, waste and vent systems. Installers use it wherever a run has to make a sharp turn.
  • 45 Degree Elbows: A 45 degree elbow changes the direction of flow by a gentler angle than a 90 degree elbow. Nibco lists a 1-1/4 inch H x H ABS 45 degree elbow and a 1-1/4 inch spigot x hub version. Residential and commercial DWV installers use them when a run needs a smaller change in direction.
  • Spigot x Hub Street Elbows: A street elbow has a spigot end on one side and a hub end on the other. Nibco's 1-1/4 inch spigot x hub ABS DWV 90 degree street elbow is used in residential and commercial drain, waste and vent systems to change the direction of flow. Installers use it to turn a run while keeping a spigot x hub connection.
  • Male Adapters: A male adapter converts a solvent weld connection to a threaded connection. Nibco's 1-1/4 inch SPG x MIPT ABS male adapter has a spigot x male NPT thread connection. Installers use it in residential and commercial DWV systems where ABS pipe meets a threaded fitting.

Buying Guide

Start with the job the fitting has to do. A turn in the run calls for an elbow, and the angle decides between a 90 degree and a 45 degree pattern. A transition from solvent weld pipe to a threaded connection calls for a male adapter. Once the function is settled, confirm the size. Nibco lists several of these fittings in 1-1/4 inch, and the size has to match the pipe on the job.

Next, read the end connections. A hub x hub fitting has a hub on each end, while a spigot x hub street elbow has a spigot on one end and a hub on the other. Pick the pattern that lets the run connect without adding extra couplings. A male adapter is described by its spigot x male NPT thread connection, so check the thread type on the mating part before ordering.

When comparing ABS DWV fittings, confirm the material, the product type and the connection type listed on each product page. Material matters because ABS is resistant to a wide variety of materials, from sewage to commercial household chemical formulations. Verify the part against Nibco's technical data sheets and catalogs for engineering and installation information, since the product descriptions point installers to those documents. Count the fittings for the full run before ordering so a single missing angle does not stall the rough-in.

Frequently Asked Questions

What are ABS DWV fittings used for?

ABS DWV fittings connect and redirect ABS pipe in residential and commercial drain, waste and vent systems. Elbows change the direction of flow, and male adapters move from a solvent weld connection to a threaded one.

What's the difference between a hub x hub elbow and a street elbow?

In ABS DWV fittings, a hub x hub elbow has a hub on both ends, such as the Nibco 1-1/4 inch H x H ABS 45 degree elbow. A street elbow, such as the Nibco 1-1/4 inch spigot x hub 90 degree street elbow, has a spigot on one end and a hub on the other. Pick based on the connections the run needs.

How do I go from ABS pipe to a threaded connection?

Moving from ABS pipe to a threaded connection takes a male adapter among the ABS DWV fittings. Nibco's 1-1/4 inch SPG x MIPT ABS male adapter has a spigot x male NPT thread connection and adapts a solvent weld connection to a threaded connection. Confirm the thread type on the mating part before ordering.

Can ABS DWV fittings handle chemicals?

Nibco states that ABS is resistant to a wide variety of materials, from sewage to commercial household chemical formulations. For a specific chemical or exposure, ABS DWV fittings should be checked against Nibco's technical data sheets and catalogs. The data sheets carry the engineering information.

Where do I find installation details for Nibco ABS DWV fittings?

Nibco directs installers to its technical data sheets and catalogs for engineering and installation information. The product pages for ABS DWV fittings list the product type, material and size, so check those details against the job first. The Nibco 1-1/4 inch 90 degree elbow, for example, lists ABS as its material and 1-1/4 inch as its size.

Didn't find what you're looking for? 
Let us know
.