
| Fuel Type: | Electric |
|---|---|
| Application: | 1 Sink |
| Width: | 5-1/4" |
| Height (Inches): | 10.75" |
| Max Flow (GPM): | 0.5 |
| Flow Rate (GPM): | 0.5 |
| Amps (120V): | 20 |
| Voltage: | 120v |
| Depth (Inches): | 2-7/8" |
| KW (120V): | 2.4 |
| Warranty: | 5 Year Against Leaks/1 Year on Parts & Electrical Components |
| Width (Inches): | 5-1/4" |
| Efficiency: | 99% |
| Water Connection: | 3/8" |
| Temperature Range (F): | 105°F - 110°F |
My well water is 60 degrees, this unit will barely take the chill out unless you turn it down to a trickle. I use it for a 1/2 bath sink. I bought a 220V for the master vanity, works a whole lot better.
Absolutely Mike McCoy Real McCoy plumbing
You should pipe with this unit in the same manner you would if you were using a standard tank-style water heater.
This unit is hard-wired.
According to the manufacturer, if you do not mount the unit vertically, it will cause the element to burn out.
Here is a link to thermostatic tankless water heaters: http://www.pexsupply.com/Eemax-Thermostatic-Electric-Tankless-Heaters-1662000
This unit is designed replace, NOT supplement existing hot water, and is fed by the cold water supply at the Point of use. It claims a 33 degree temperature rise from the supply temperature. I would NOT recommend connecting this to the hot side or you will lose the efficiency this unit provides. You can adjust the faucet temperature by mixing in cold water using the cold water faucet. Be aware this unit supplies 1/2 Gallon per minute of hot water, which is enough to wash your hands and not much else, and is ideal for a sink basin, but NOT a shower.