'/%3E%3C/svg%3E)
TrueZONE HZ311 Panel
 --%3E %3Csvg version='1.1' id='Fill' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23F15C02' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
MANUALS (4)
Product Highlights
Description
Features:
- Provides the Ability to Control Individual Zones
- Easy to Install
- Inconspicuous, Professional Looking Panel
Specs
| Application: | Zoning |
|---|---|
| Number of Zones: | 3 |
| Network Zoning: | No |
| Heat Pump Compatible: | No |
| Stages: | 1 Heat/1 Cool |
| Auto Changeover: | Yes |
| Voltage: | 24V |
| Discharge Air Temp Compatible: | Yes |
| Emergency Heat Switch: | No |
| Resettable Fuse: | Yes |
| Individual Zone Fan Control: | Yes |
| LEDs: | Yes |
| Height (Inches): | 8.12" |
| Depth (Inches): | 1.86" |
| Width (Inches): | 8" |
| Wiring: | 18-20 Gauge Solid |
| Hertz: | 50 60 |
| Temperature Range (F): | -40°F - 165°F |
Contact
Questions?
Compare Similar Products
You May Also Need
Product Reviews
Most Liked Positive Review
Works as expected (and hoped)
Most Liked Negative Review
 --%3E %3Csvg version='1.1' id='With-RB' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23FBC8B4' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
Warranty service for HZ322
Excellent Customer Service
Unhappy
Same as others who have reviewed.
I would definitely buy from Supply House from now on
Just out of warranty and it died.
Great products, Great Service!!
Best service ever!!
right part
Upgrade
Great Product would recommend
Product Q&A
25 QuestionsQ: Is the hz322 truzone more sensitive to lightning damage than older Honeywell controllers. I have lost the hz322 twice in the last couple of months because of nearby lightning strikes.
Asked by David 15 years ago
Add your answer
Verified Reply- PexSupply StaffAccording to the manufacturer, TrueZONE panels have an automatically resetting thermal fuse that protects the panel where power is wired in and automatically resets thermal fuse protection on each individual zone. This is a level up in the protection offered by previous zone panels.
Q: What does it mean when the purge light comes on? what is the system doing?
Asked by 15 years ago
Add your answer
Verified Reply- PexSupply StaffThe purge light remains solid when the system is purging (lasts 2 minutes at power-up and after a call for heat or cool). It blinks when the DATS sensor has failed, or the wires are shorted or open. The light will blink for 3 minutes at power-up if DATS is not present.
The purge light indicates that the system is purging air through the unit. To put it in layman's terms: When your AC/Heat is running, it runs for X amount of minutes. During that time, warm or cold air is being pumped into your home through the unit. When the purge light comes on, it's basically purging some left over air over the already heated or cooled coils. Think of it as a way to use up some "left over" heat or cold without actually engaging the compressor or heat pump (etc). At least, I'm 90% sure that's what this means. ;)
Q: What happens if one thermostat is calling for heat and another is calling for cooling?
Asked by Paul 15 years ago
Add your answer
Verified Reply- PexSupply StaffThis panel has “Auto Changeover” capability, a universal feature on all of Honeywell’s current zone panels. The first call will have priority. When an opposite call occurs, the zone panel will start a timer and, when it has elapsed, the zone panel will end the first call for heat or cooling and purge the ducts. After that, it will initiate the opposite call and then alternate between the calls until all zones are satisfied.
Q: I want to install this on my house and create a 2 zone system (upstairs/downstairs). My question is about the thermostats. If I install a Honeywell touch screen 7 day programmable downstairs do I need to do the same upstairs or can I simply utilize my existing heat pump digital stat from the downstairs which isn't programmable? I have a heat pump with auxillary electric heat.
Asked by Jason 15 years ago
Add your answer
Verified Reply- PexSupply StaffYou can use your existing thermostat to create a 2-zone system, but the upstairs zone will not be programmable.
Q: I currently have a hot water heat system with 2 zones will this control work with a hot water system?
Asked by 16 years ago
Add your answer
Verified Reply- PexSupply StaffYes, it will work as long as you have all the required Honeywell components for the system.