| Amperage: | 1 |
|---|---|
| Application: | Heat Only |
| Stages: | 1 Heat |
| Programmability: | Non-Programmable |
| User Interface: | Mechanical |
| Mount: | Round |
| Power Method: | Battery Assisted Power Stealing |
| Temperature Range (F): | 40°F - 90°F |
| Operating Humidity: | 5 to 90% RH, non-condensing |
| Wattage: | 0.4 to 30 |
| Wiring: | R W Y |
| Frequency: | 50 Hz 60 Hz |
| Color: | Premier White |
| Height: | 3-11/16" |
| Width: | 3-11/16" |
| Depth (Inches): | 1-3/4" |
| Voltage: | Low voltage 24V |
This is a non-programmable thermostat. To set the temperature, you need to turn the dial. Please refer to the owner's manual, page 5: http://s3.pexsupply.com/manuals/1286211794069/39858_PROD_FILE.pdf
According to the manufacturer, the answer depends on what type of system you are going to wire the new T87 to. The new T87 requires 24VAC / 24 hours a day at the thermostat subbase.
Wiring instructions can be seen on page 3 of the manual posted in the link below. http://s3.pexsupply.com/manuals/1286211794069/39858_PROD_FILE.pdf