'/%3E%3C/svg%3E)
Hover image to zoom
FocusPro Programmable, 1H/1C, Standard Display Thermostat
 --%3E %3Csvg version='1.1' id='Fill' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23F15C02' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
 --%3E %3Csvg version='1.1' id='Half' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cg%3E %3Cpath fill='%23F15C02' d='M30.05,70.23l3.79-12.01L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1h1.58 L93.71,7.18c-3.58-3.82-8.66-6.23-14.28-6.23H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,5.41,2.22,10.32,5.79,13.88 L30.05,70.23z'/%3E %3C/g%3E %3Cpath fill='%23FBC8B4' d='M93.71,7.18L60.98,39.6H91.2L65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82l5.55-17.59L6.75,93.32 c3.55,3.54,8.44,5.73,13.82,5.73h58.87c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,15.4,97.01,10.69,93.71,7.18z'/%3E %3C/svg%3E){kind=small}
Hover image to zoom
' fill='%23F15C02' d='M49 0C21.938 0 0 21.938 0 49s21.938 49 49 49 49-21.938 49-49S76.062 0 49 0m0 82.709a7.54 7.54 0 1 1 0-15.08 7.54 7.54 0 0 1 0 15.08m7.54-28.412a7.541 7.541 0 0 1-15.08 0V22.831a7.54 7.54 0 0 1 15.08 0v31.466z'/%3E%3C/svg%3E)
TH6110D1005 has been discontinued
Discontinued November 19, 2022
This product was discontinued by the manufacturer.
MANUALS (6)
This item replaces: 1F72-301
Direct Replacement:
FocusPro P200 Programmable, 3H/2C Heat Pump, 2H/2C Conventional, Large Display Thermostat, TH2320U4006
Product Highlights
–
5-1-1 Day, Programmable
Low voltage, 24V, 750mV
1 Heat/1 Cool
Horizontal
Battery, Hardwired
1 Amps
Description
–
Overview
1 heat/1 cool conventional and heat pump programmable thermostat with R, Rc, C, W (O/B), Y and G terminals. Provides electronic control of 24 Vac conventional and heat pump systems or 750 mV heating systems.
Features
1 heat/1 cool conventional and heat pump programmable thermostat with R, Rc, C, W (O/B), Y and G terminals. Provides electronic control of 24 Vac conventional and heat pump systems or 750 mV heating systems.
Features
- Weekday/Weekend programming - use as a 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend) programmable thermostat, whichever best fits your lifestyle.
- Large, clear, backlit display - easy to read in various lighting conditions.
- Display size options - available in large screen or standard.
- Precise comfort control (+/- 1ªF) - maintains consistent comfort to the highest level of accuracy.
- Simplified programming and operation.
- Easy change battery door - flip out door allows for easy battery replacement without removing or disassembling the thermostat.
- Built in instructions - simple, pull out instruction manual.
- Energy savings - program to save up to 33%* on annual heating and cooling costs.
- Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time.
- Temperature range stops - prevents user from setting the temperature too high or too low.
- 5-year limited warranty.
Specs
–
| Amperage: | 1 |
|---|---|
| Application: | Single-Stage (Heat/Cool) Heat Pump |
| Stages: | 1 Heat/1 Cool |
| Programmability: | 5-1-1 Day Programmable |
| User Interface: | Push Button |
| Mount: | Horizontal |
| Options: | Fan Control Auto Changeover |
| Power Method: | Battery Hardwired |
| Changeover: | Manual Auto |
| Display Size: | 2.75 sq. in. |
| Temperature Range (F): | 40°F - 99°F |
| Max Temp Differential: | 1°F |
| Operating Humidity: | 5 to 90% RH, non-condensing |
| Voltage: | Low voltage 24V 750mV |
| Wattage: | 0.4 to 30 |
| Wiring: | C G R Rc W(O/B) Y |
| Frequency: | 50 Hz 60 Hz |
| Color: | Premier White |
| Height: | 3-9/16" |
| Width (Inches): | 5-13/16" |
| Depth (Inches): | 1-1/2" |
| Wireless: | No |
| Humidity Control: | No |
Questions?
Speak with a real person who will go out of the way to help!
Call or text 888-757-4774
Monday – Thursday
8am–7:45pm
Friday
9am–7:45pm
Saturday – Sunday
9am–5:45pm
Compare Similar Products
Brand
Application
Stages
Programmability
User Interface
Mount
CURRENT ITEM
Single-Stage (Heat/Cool)
Heat Pump
Heat Pump
1 Heat/1 Cool
5-1-1 Day
Programmable
Programmable
Push Button
Horizontal
You May Also Need
Product Reviews
4.71 out of 41 reviews
93% would recommend this product
5 star
83%
4 star
10%
3 star
2%
2 star
5%
1 star
0%
Most Liked Positive Review
Excellent product,not for the novice.
This thermostat is terrific. I can't verify it, but it seems to keep the temperature within a couple of 0.1s of a degree. My old digital thermostat wouldn't turn on until the temperature was 1 degree above the set temp and wouldn't turn off until it was 1 degree below the set temp. This thermostat needs to be programmed by someone who knows the specifications of your system.
VS
Most Liked Negative Review
 --%3E %3Csvg version='1.1' id='With-RB' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23FBC8B4' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
TH6110D Looks Good but with
Our Honeywell TH6110 was replaced by the dealer after we reported questionable accuracy of the temp sensor and cycle rate. Supply House was very cooperative and handled the replacement at no charge. However, the replacement TH6110 operated the same. The unit was easy to install, set-up and program. The clock sequences as designed, but could not achieve and maintain the room set point temp. The heat cycle rate caused longer off times. During the cold days we had to raise the set point 2 degrees in order to hold room temp. The temp indicator always indicates the same as set point which seems unusual; it does not anticipate or sense a need for heating or adjust for lower temp as room conditions change. We called Honeywell Customer Care and they advised to relocate to another room and check operating voltage from furnace; both steps were inconclusive and proved normal. Going forward, we will continue to observe performance of temp indicator both on heat and cooling cycles.
Showing 1-10 of 41 reviews
I WOULD BUY IT AGAIN .
GREAT PRICES., MATERIAL IN STOCK., GREAT SUPPORT. ALL WAS NICE AND EASY
LILY
BROWNSVILLE, TX 78520
5 years ago
Verified Buyer
Was this review helpful to you?
Only thermostat for 3 wire,series 20, power on/off hydronic
I bought this on a chance if would perform as the review headline says, and it does.
Although you will not see it in product description, buried in the installation setup instructions is a flag you set for a variety of applications, one of which is the series 20 power on/off for my 5 Honeywell 1311-102 zone control valves.
Programming the awake/leave for work/return/sleep was easy as long as you proceed slowly. I like the ability to also override the programming temporarily to up the temperature. Have purchased several more to have independent temps in each of the
5 areas. makes a nice "click" to go along with "heat on" or 'blank" when in use. Looking at
wires in their slots, power wire is right most wire(R), power off is in middle(Y), and heat on is left (W).
D.N.K
Denver,Co.
6 years ago
Verified Buyer
Was this review helpful to you?
Replacement thermostat is perfect
The product came fast and works fine.
Deborah
Bethesda, Md
6 years ago
Verified Buyer
Was this review helpful to you?
my thermostt
works fine. back in business
arnie
iowa
8 years ago
Verified Buyer
Was this review helpful to you?
I would definately buy again
This worked perfect when we added a third zone valve in for our downstairs for our newborn daughter. Works perfect, programming and set up was a breeze and our little one is nice and warm. The customer support was beyond amazing and we appreciate all that you did to help us out.
JOE
upstate ny
8 years ago
Verified Buyer
Was this review helpful to you?
Yes I would
WE had one of these in Texas and it worked fine. So we had one installed here in Michigan.
Bob
Sandusky, Mi.
8 years ago
Verified Buyer
Was this review helpful to you?
Yes
Quick shipping. The Thermostats were simple to operate. I would keep the recovery feature off unless you need the change to be at that temp at the time set.. Seems to me to be a waste of time. Otherwise great product
JD
New Jersey
8 years ago
Verified Buyer
Was this review helpful to you?
Bright back light
I replaced 11 year thermostat with FocusPro which is the exactly same model we had. It works well for us.
Hopeful
Chicago, IL
8 years ago
Verified Buyer
Was this review helpful to you?
TH6110D Looks Good but with
Our Honeywell TH6110 was replaced by the dealer after we reported questionable accuracy of the temp sensor and cycle rate. Supply House was very cooperative and handled the replacement at no charge. However, the replacement TH6110 operated the same. The unit was easy to install, set-up and program. The clock sequences as designed, but could not achieve and maintain the room set point temp. The heat cycle rate caused longer off times. During the cold days we had to raise the set point 2 degrees in order to hold room temp. The temp indicator always indicates the same as set point which seems unusual; it does not anticipate or sense a need for heating or adjust for lower temp as room conditions change. We called Honeywell Customer Care and they advised to relocate to another room and check operating voltage from furnace; both steps were inconclusive and proved normal. Going forward, we will continue to observe performance of temp indicator both on heat and cooling cycles.
Lar
Cherry Hill, NJ
8 years ago
Verified Buyer
Was this review helpful to you?
Easy to Install/Operate but Chilly
Honeywell TH6110 looks good and is easy to install and operate. Questionable accuracy of temperature sensor and heat anticipator. Adjusted heat cycle rate and intelligent recovery, but still cold due to longer off times. May have to re-install my old thermostat.
Lar
Cherry Hill, NJ
8 years ago
Verified Buyer
Was this review helpful to you?
Product Q&A
13 Questions13 Questions
Q: how to change setting from F to C?
Asked by 16 years ago
Add your answer
Verified Reply- PexSupply StaffPlease refer to page 10 of the Installation Manual for more information: http://s3.pexsupply.com/manuals/1249544874360/Honeywell_TH6110D1005_Install_Guide.pdf
Was this review helpful to you?
- Jerry
To begin, press and hold the "Up temperature button" and the FAN buttons simultaneously until the display changes. The display will show the "Function" number on the left and the "Setting" on the right. Press the "next" button until you reach function "14", it will display a setting of "0". Press the "Up temperature button" to change from "0" to "1", this will change the readout from fahreneit to celsius. Press "Done" to exit and save the setting.
Was this review helpful to you?
- Spotman
Easy. Just go into programming by holding the center bottom button and the up arrow button at the same time. Then release the buttons. Now select the item to change by pressing next until you get to item #14. Then press the up arrow to change. 0 is for Fahrenheit and 1 is for Celsius. Press done...That's it.
Was this review helpful to you?
Q: why won't the heater turn on in the auto mode
Asked by 16 years ago
Add your answer
Verified Reply- PexSupply StaffPlease refer to the Operating Manual for more information: http://s3.pexsupply.com/manuals/1249544874360/Honeywell_TH6110D1005_Operating_Manual.pdf
Was this review helpful to you?
Q: I have this model in my home. My home is 3 years old. Just recently I noticed it is not reading 2 of the 4 time change controls. Upon taking it's face off, we noticed the batteries have leaked some acid. Could this be affecting why my thermostat won't always work? And if so, does it sound like we just need to swap ours out for a new one?
Asked by Shawna 16 years ago
Add your answer
Verified Reply- PexSupply StaffThe batteries may be the reason the thermostat does not recognize the time settings. It is suggested to reset the unit by reprogramming the settings. If this does not work a new unit would have to replace this one. The batteries in this unit must be Alkaline only (no Lithium batteries can be used).
Was this review helpful to you?