| Application: | Hot Water 2 Pipe Steam |
|---|---|
| Size: | 1-1/4" |
| Max Pressure (PSI): | 150 (Hot Water) 15 (Steam) |
| Body Pattern: | Angle |
| Differential: | 17 psi |
| Connection Type: | FNPT x MNPT Union |
| Position: | Normally Open |
| Temperature Range (F): | 248°F Max |
| Flow Capacity (Cv): | 8 |
| Capacity: | High |
| BTU: | 193000 Btu/hr (steam) |
| Capacity (BTU): | 193000 |
| Material: | Bronze |
yes it will.
You can, but this particular valve is designed for two-pipe systems.
You would need a thermostatic actuator and an air vent to attach to the valve body. You would need a thermostat connected to the boiler unless the boiler is set up for continuous flow.