ProPEX Copper Pipe Adapters are Uponor lead-free brass fittings that transition PEX tubing to copper pipe. The ProPEX LF brass sweat adapters take a ProPEX connection on the PEX end and a sweat connection on the copper end. Uponor describes the line as a transition from AquaPEX tubing to copper pipe. Sizes start at 3/8 inch PEX by 1/2 inch copper and include same-size configurations such as 1 inch PEX by 1 inch copper. Installers use them wherever a PEX run meets existing copper pipe. ProPEX rings are sold separately, and the ProPEX tool is required to make the PEX connection. Uponor also states that these sweat adapters are not for pressing, so copper press joints call for a different adapter. Matching the adapter to the pipe size on both sides keeps the transition clean and the job on schedule.
Subcategories
Buying Guide
Start with the pipe on each side. Identify the PEX size and the copper size separately, because each adapter is listed as PEX by copper, such as 3/4 inch PEX by 1 inch copper. Both same-size and mixed-size configurations exist, so read the full size pair before ordering.
Confirm the tubing brand. Uponor describes the line as a transition from Uponor AquaPEX tubing to copper pipe, so the PEX side should be matched to the ProPEX system. Plan for ProPEX rings, which are sold separately, and for the ProPEX tool that the connection requires.
Choose the joint type next. When comparing ProPEX Copper Pipe Adapters, check whether the copper side is a sweat joint or a press joint. Uponor states that its LF brass sweat adapters should not be pressed, and it offers separate ProPEX LF brass copper press adapters for press applications.
Finally, check the material and the job rules. The line is lead-free brass, which matters where local code or the project spec calls for lead-free fittings. Count the joints by size pair so the ring count matches the adapter count. Verify the exact model number on the product page against both pipe sizes before checkout, and order extra rings if the crew has several joints to make.
Frequently Asked Questions
What are ProPEX Copper Pipe Adapters used for?
ProPEX Copper Pipe Adapters transition Uponor AquaPEX tubing to copper pipe. One end takes a ProPEX connection and the other end is a sweat connection. Use them wherever a PEX run has to meet copper.
Do ProPEX copper adapters come with the rings?
ProPEX Copper Pipe Adapters are not sold with the rings, since Uponor lists ProPEX rings as sold separately. The ProPEX tool is also required to make the PEX connection. Confirm both before the crew heads out.
Can a ProPEX sweat adapter be pressed onto copper?
Uponor states that ProPEX LF brass sweat adapters should not be pressed. For copper press applications, Uponor points to its ProPEX LF brass copper press adapters. Check which copper joint the job calls for before ordering ProPEX Copper Pipe Adapters.
What sizes do ProPEX sweat adapters come in?
ProPEX LF brass sweat adapters start at 3/8 inch PEX by 1/2 inch copper. Mixed sizes include 1/2 inch PEX by 3/4 inch copper and 3/4 inch PEX by 1 inch copper, and same-size options include 1/2 inch, 3/4 inch and 1 inch. Read the full size pair on each listing.
Are ProPEX copper pipe adapters lead-free?
The ProPEX LF brass sweat adapters are made from lead-free brass, which is what LF in the name stands for. Lead-free brass suits jobs where code calls for lead-free fittings, so confirm local requirements. ProPEX Copper Pipe Adapters in this line use that material.