Switching Relays are zoning controls that let a low voltage thermostat switch line voltage devices in hydronic heating systems. The listing spans one and two zone models, including the Taco 1 zone relay, the Argo ARM-2P 2 zone relay, the Bell & Gossett Z-2 2 zone relay, and the Azel SP-81 1 zone pump controller. The Resideo R845A1030 provides DPST switching with an internal transformer, and the Azel SP-81 is a DPDT unit with surge and fuse protection that runs on 120 VAC. Zone count, switching action, voltage, and thermostat compatibility decide which relay fits a given system. Check the electrical ratings on each product page before ordering. Choosing the right relay at the start keeps the wiring straightforward and avoids callbacks for a control that cannot handle the load.
Subcategories
Buying Guide
Start with the zone count. Single zone applications can use the Taco 1 zone relay or the Azel SP-81 pump controller, while the Argo ARM-2P and the Bell & Gossett Z-2 are 2 zone models. Expandable designs, such as the Taco relay and the Argo ARM-2P, allow more zones to be added. The Argo transformer is described as able to handle as many as 15 zones.
Next, confirm thermostat compatibility. The Taco relay is listed as compatible with conventional, programmable, and WiFi based thermostats. The Bell & Gossett Z-2 works with analog and digital 24 VAC thermostats, including power stealing designs. The Resideo R845A1030 can be controlled directly by any 2 wire series 80 thermostat.
Then, check electrical and protection details. The Taco relay is rated at 120v, the Argo ARM-2P lists 7.2 amps and a 20 VA rating, and the Bell & Gossett Z-2 lists 20 amps. The Azel SP-81 adds surge and fuse protection, and the Argo ARM-2P includes an auto reset electronic fuse.
When choosing Switching Relays, look at control features as well. The Argo ARM-2P adds a priority safety timer and a 5 second time delay for boiler shut-off, while the Z-2 provides a DHW priority timer, post purge function, and pump exercise. The Resideo R845A1030 lists a maximum ambient condition of 115 F at 60 Hz, so mounting location matters.
Frequently Asked Questions
What does a switching relay do on a zoned hydronic system?
Switching Relays provide intermediate switching of a line voltage device from a low voltage controller, as the Resideo R845A1030 description states. The Bell & Gossett Z-2 is described as a ready to install controller for hydronic circulators. Match the relay to the zone count and thermostat type on the job.
Do switching relays work with WiFi thermostats?
The Taco 1 zone switching relay is listed as compatible with conventional, programmable, and WiFi based thermostats and is UL listed. The Bell & Gossett Z-2 is listed as compatible with analog and digital 24 VAC thermostats, including power stealing designs. Compatibility is model specific, so check each switching relay before ordering.
Which switching relay has a DHW priority timer?
The Bell & Gossett Z-2 ZoneTrol II is a 2 zone switching relay with a DHW priority timer, post purge function, and pump exercise. It is UL and cUL listed for residential and light commercial applications. The Argo ARM-2P lists a separate priority safety timer.
Can I add zones to a switching relay later?
The Taco 1 zone relay and the Argo ARM-2P 2 zone relay are both listed as expandable. The Azel i-Link description says models other than the SP-81 can be interconnected for zone expansion, so the SP-81 is treated as a single zone unit. Confirm the expansion method in the product details before planning extra zones on a switching relay.
Do switching relays offer surge or fuse protection?
The Azel SP-81 1 zone pump controller switching relay lists surge protection and fuse protection, and it is a DPDT unit on 120 VAC with a 3 year extended warranty. The Argo ARM-2P lists an auto reset electronic fuse. Check the protection features on each switching relay before choosing.