| Amperage: | 2.5 |
|---|---|
| Application: | Multi-Stage (Heat/Cool) Heat Pump |
| Stages: | 2 Heat/2 Cool 3 Heat/2 Cool Heat Pump |
| Programmability: | 7 Day Programmable |
| User Interface: | Touchscreen |
| Mount: | Horizontal |
| Options: | Password Lockout Works with Sensor Fan Control Large Display Auto Changeover |
| Power Method: | Battery Hardwired |
| Changeover: | Auto |
| Temperature Range (F): | 45°F - 99°F |
| Voltage: | Low voltage |
| Wattage: | 30 to 75 |
| Wiring: | G B W2 Y Y2 Rc C L W/E O Rh |
| Color: | White |
| Height: | 4-2/5" |
| Width: | 5-9/10" |
| Depth (Inches): | 1-1/5" |
| Wireless: | No |
| Humidity Control: | No |
It cannot be dimmed, but the display light can be turned off- it will then only go on temporarily while you are interacting with the touchscreen. This setting is accessed in the main setup, turn off continuous display lighting.
In programming mode, check step 13. If it is on, then the display will stay on continuously. In off, factory default), the display comes on when you touch the screen stays on for a short time and then goes off. See page six of the operation manual. You can not dim the backlight of the display but it would be easier to sleep at night if the backlight went off. When I've installed these in homes I leave it in the factory setting. I hope this helps. Stan
The replacement for your 1f95-1271 would be RS6320.
1F81-261 thermostats are still available. This unit is also a low-voltage, 2 heat/ 2 cool model and could function as an upgrade/replacement.
yes
It sounds to us as if you may have a wiring/control issue. Please make sure everything is wired correctly and the boiler control is functioning properly.
1) Press Menu 2) Press and hold "Installer Config" for 5 seconds 3) Press the down arrow until you get to menu item 14 4) Press the side arrows to alternate between Fahrenheit and Celsius display
This thermostat has a 5-year warranty.
White-Rodgers manufactures the 1F99CT-1291 as a proprietary part for Goodman. There is no direct replacement for it, but other thermostats with the same specs may work in its place.
It does. For a full list of features, please see the following product information file: http://s3.pexsupply.com/manuals/1249544587127/White_Rodgers_1F95-1277_Product_Information.pdf
This thermostat will work, as long as its specs match those of the furnace.
The manufacturer recommends that you change the fan setting from gas to electric. See page 5 in the Installation Guide ( http://s3.pexsupply.com/manuals/1249544587127/White_Rodgers_1F95-1277_Instructions.pdf ) for more information.