Brass Bushings are threaded reducing fittings that adapt a larger female port to a smaller pipe size. The category includes MIP x FIP configurations from Bluefin and Everflow, such as the Bluefin BRB200-125, a 2" x 1-1/4" MIP x FIP brass bushing listed as lead free. A bushing has male threads on the outer end and female threads on the inner end, so the smaller line threads straight into the existing fitting, valve, or tank connection. Product titles name sizes including 1/2" x 1/8", 1/2" x 1/4", 3/4" x 1/2", 2" x 3/4", and 2" x 1-1/4". Installers use them on plumbing and heating jobs where a port is one size larger than the pipe being connected. Matching thread type, size pairing, and lead-free status to the application keeps a reducing connection compact and avoids a second trip to the supply house.
Subcategories
Buying Guide
Start with the two sizes the bushing has to connect. In a title such as 3/4" x 1/2", the first number is the outer male thread and the second is the inner female thread, so confirm which port is larger before ordering. Then confirm thread type. The products named in this category are MIP x FIP, meaning male iron pipe threads on the outside and female iron pipe threads on the inside.
Check the lead-free designation next. The Bluefin and Everflow titles named here mark the brass as lead free, so confirm that wording on whichever bushing goes into a plumbing line. When a project spec calls for a particular compliance listing, read the full product page rather than assuming.
Consider how large the reduction is. For Brass Bushings in small sizes such as 1/2" x 1/8", a single bushing is the compact answer. When the reduction is large, compare a bushing against a reducing coupling or a short nipple and a second fitting, and pick the option that suits the space and the joint.
Finally, keep brand and part number consistent across a job. Write the full model number, such as BRB075-050 or BRBU0121-NL, on the material list so the correct piece gets pulled at the counter and every joint in the run matches.
Frequently Asked Questions
What does MIP x FIP mean on a brass bushing?
On Brass Bushings, MIP x FIP means male iron pipe threads on the outer end and female iron pipe threads on the inner end. The Bluefin BRB075-050 is a 3/4" x 1/2" example. Reading the title this way shows which port the bushing fits and which pipe it accepts.
How do I read the size on a brass bushing?
Brass bushing sizes list the larger outer thread first and the smaller inner thread second, as in the Everflow BRBU0121-NL at 1/2" x 1/4". Match the first number to the port being reduced and the second number to the pipe or fitting going in. Confirm both before ordering.
Are the brass bushings lead free?
The Bluefin and Everflow brass bushings named in this category carry a Lead Free designation in their product titles, including the BRB200-125 and the BRBU0121-NL. For any other bushing in the listing, read the full title and product page before installing it on a plumbing line. Lead-free status should not be inferred from the brass material alone.
Can a brass bushing replace a reducing coupling?
A brass bushing reduces the size inside an existing fitting port, while a reducing coupling is a separate piece that joins two pipes. Bushings keep a connection compact, which suits tight spaces, and a coupling can suit a run where space is not a concern. Pick based on the layout and the pipe sizes involved.
What sizes of brass bushings are named in this category?
Product titles for Brass Bushings include 1/2" x 1/8", 1/2" x 1/4", 3/4" x 1/2", 2" x 3/4", and 2" x 1-1/4". Each of those is MIP x FIP. Check the full listing for the complete size range before ordering.