NFPA Swivel Rings are ring hangers designed for suspending pipe, and several of the models listed are UL Listed and NFPA standardized. The Piers 5" Em-Lok swivel ring fits 5.563" OD pipe on a 1/2" rod, while the 1/2" Piers rings fit 0.84" OD pipe on a 3/8" rod. A Bluefin 2-1/2" Em-Lok ring fits 2.875" OD pipe, and Piers epoxy coated swivel ring hangers are also listed. Several listed models use a knurled insert nut that allows adjustment after installation, and they are designed for the suspension of insulated pipe lines. The Piers models with approval details also cite compliance with MSS SP-69 and SP-58 Type 10. For contractors, matching ring size to pipe OD and rod diameter, plus the required approvals, is what keeps a hanger job on spec.
Subcategories
Buying Guide
Start with the pipe OD. Swivel rings are matched by pipe OD, so confirm the OD first: the listed Piers rings include 0.84" OD for 1/2", 1.050" OD for 3/4", and 5.563" OD for 5", while the Bluefin 2-1/2" ring fits 2.875" OD pipe. Match the rod diameter second. The 1/2" and 3/4" Piers rings and the 2-1/2" Bluefin ring use a 3/8" rod, and the 5" Piers ring uses a 1/2" rod.
Second, check approvals. When comparing NFPA Swivel Rings, read the listing for UL Listed and NFPA standardized status, plus compliance with MSS SP-69 and SP-58 Type 10 where cited. The Piers models with those details also reference Federal Specification WW-H-171E and A-A-1192A Type 10. Some listings carry no approval text, so confirm required approvals with the manufacturer before specifying.
Then consider material and finish. The 1/2" Em-Lok ring has a plastic coating that separates copper tubing from the steel ring for electrolytic resistance and minimizes noise and vibration. The 3/4" epoxy coated hanger is steel with an epoxy coated finish. Pick the coating that fits the pipe material and the environment.
Finally, consider adjustment. A knurled insert nut allows adjustment after installation on the Piers models that list it, which helps when final pipe position needs fine tuning.
Frequently Asked Questions
What are NFPA swivel rings used for?
NFPA swivel rings are ring hangers designed for suspending pipe. Several of the listed Piers models are designed for the suspension of insulated pipe lines and are UL Listed and NFPA standardized. Confirm the approvals on the exact model before specifying.
How do I size an NFPA swivel ring?
Size NFPA swivel rings by pipe OD and rod diameter. For example, the Piers 1/2" ring fits 0.84" OD pipe on a 3/8" rod, and the Piers 5" ring fits 5.563" OD pipe on a 1/2" rod. Check both specs on the model being ordered.
Can I adjust an NFPA swivel ring after it's installed?
On the Piers NFPA swivel rings that list a knurled insert nut, the nut allows adjustment after installation. The 1/2" Em-Lok ring and the epoxy coated hangers list this feature. Not every NFPA swivel ring listing mentions it, so check the model details.
Do NFPA swivel rings protect copper tubing?
The Piers 1/2" Em-Lok adjustable swing ring has a plastic coating that separates copper tubing from the steel ring for electrolytic resistance. The coating also minimizes noise and vibration. Check other NFPA swivel rings individually for coating details.
What standards do NFPA swivel rings meet?
The Piers 1/2" and 3/4" NFPA swivel rings list UL Listed and NFPA standardized status. They also cite compliance with Federal Specification WW-H-171E and A-A-1192A Type 10, plus MSS SP-69 and SP-58 Type 10. The Bluefin ring and the 5" Piers ring show no approval text, so verify with the manufacturer.