SharkBite Ball Valves w/ Drain are push-fit shutoff valves with a built-in drain or vent, so water can be drained from the line when a job calls for it. The SharkBite Max models carry a mounting tab for stability when the valve is attached to a surface, and they connect to PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe. The 1/2" and 3/4" quarter-turn models are rated for a maximum pressure of 250 PSI. The listing also includes Bluefin push-fit ball valves with drain in 1/2" and 1" sizes. Brass bodies with push-fit by push-fit connections are listed on the 1/2" and 3/4" SharkBite Max valves and the 1/2" and 1" Bluefin valves, and the listed applications cover both heating and plumbing work. Push-to-connect designs are described as quick and easy to install, and a drain on the valve body gives techs a way to empty a section of pipe for service. For contractors, the pairing keeps installs quick and makes later service on that line easier.
Subcategories
Buying Guide
Start with line size and pipe type. The listed valves come in 1/2", 3/4" and 1" sizes, and the SharkBite Max models are compatible with PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe. Pick the size that matches the run, then confirm the pipe material against the compatibility list on the specific product page.
Next, compare pressure ratings. The 1/2" and 3/4" SharkBite Max valves list 250 PSI maximum pressure, while the Bluefin push-fit valve record lists 200 PSI for 1/2" to 1" sizes and 200 F for water service. Check the system's operating conditions against the exact model, since ratings are tied to individual products and not to the whole category.
Water quality matters for brass. Bluefin notes its push-fit valves with drain are susceptible to dezincification and do not hold a high DZR rating, so they should not be used where brass parts may be exposed to hard water with high sulfur or mineral content.
When choosing among SharkBite Ball Valves w/ Drain, decide whether the valve needs to be fastened to a surface. SharkBite Max models include a mounting tab for stability, and the drain or vent lets water be drained from the line if needed. A 1" SharkBite Max valve can be installed on wet lines and pressure tested immediately.
Finally, check the application. The listed records show heating and plumbing applications. The Bluefin 1/2" valve lists water service with CUPC, NSF/ANSI/CAN 61 and Lead Free listings.
Frequently Asked Questions
What pipe types do SharkBite ball valves with drain work with?
SharkBite Ball Valves w/ Drain in the Max series are listed as compatible with PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe. They use push-fit by push-fit connections. Check the product page for the exact model before ordering.
What's the max pressure on SharkBite ball valves with drain?
The 1/2" and 3/4" SharkBite Max quarter-turn ball valves with drain list a maximum pressure of 250 PSI. The Bluefin push-fit ball valve with drain lists 200 PSI for 1/2" to 1" sizes. Pressure ratings are tied to each model, so check the exact valve.
Why use a ball valve with a drain on a service call?
SharkBite Ball Valves w/ Drain include a drain or vent so water can be drained from the line if needed. The drain gives a tech a way to empty a section of pipe for service. SharkBite Max models also add a mounting tab for stability.
Can SharkBite ball valves with drain go on wet lines?
The 1" SharkBite Max ball valve with drain and mounting bracket is listed as installable on wet lines and pressure tested immediately. Other SharkBite ball valves with drain may differ, so check each product page for installation details.
Are the Bluefin push-fit ball valves with drain okay for hard water?
Bluefin notes that its push-fit ball valves with drain are susceptible to dezincification and do not hold a high DZR rating. They should not be used where brass parts may be exposed to hard water with high sulfur or mineral content. The 1/2" Bluefin valve is listed as Lead Free with a 200 F maximum for water.