Three Phase ODP Motors are Century motors for 3 phase power, with listed models at a 6-1/2" diameter from 3/4 HP to 3 HP. The 3/4 HP, 1800 RPM model is reversible and rated for 200-230/460V, so one motor covers dual voltage supplies. The 3 HP model lists continuous duty, a 1.15 service factor, and 460/200-230V ratings. Ball bearings are listed on the 1-1/2 HP, 2 HP, and 3 HP models. The 1-1/2 HP model adds a 1725 RPM speed, Class B insulation, and an auto protector. Horsepower, voltage, and speed differ from model to model, so a replacement has to match the original on all three. Shop by horsepower first, then voltage, then speed, and confirm the mounting against the nameplate on the old motor. Confirming those ratings before ordering keeps a motor swap to a single trip.
Subcategories
Buying Guide
Start with horsepower and voltage, since both have to match the application. Listed ratings include 3/4 HP, 1 HP, 1-1/2 HP, 2 HP, and 3 HP, with voltages such as 230V, 460V, 200-230/460V, and 208-230/460V. Confirm the building supply before choosing a dual voltage motor, then wire it for that supply.
Next, check speed. The 3/4 HP and 1 HP models are listed at 1800 RPM, and the 1-1/2 HP model is listed at 1725 RPM. Match the speed on the old nameplate so the driven load runs at the same rate.
When shopping Three Phase ODP Motors, compare construction details too. Ball bearings are listed on the 1-1/2 HP, 2 HP, and 3 HP models, and the 3 HP model is a rigid base design rated for continuous duty. Service factor matters for loads that run hard, and both the 1-1/2 HP and 3 HP models list 1.15. The 1-1/2 HP model adds Class B insulation and an auto protector.
Rotation matters too. The 3/4 HP, 1 HP, and 1-1/2 HP models are listed as reversible, so rotation can be matched to the equipment. Finally, verify mounting and frame against the old motor. A 6-1/2" diameter is listed on these models, but diameter alone does not confirm a fit. Record the nameplate data before ordering so the replacement matches on every rating.
Frequently Asked Questions
What voltage do three phase ODP motors run on?
Three Phase ODP Motors in this listing include 230V, 460V, and dual voltage ratings such as 200-230/460V and 208-230/460V. Voltage varies by model, so check the rating on the specific motor against the building supply.
Are these three phase ODP motors reversible?
Several are. The 3/4 HP, 1 HP, and 1-1/2 HP models are listed as reversible. Reversibility is not stated on every listing, so confirm it on the specific three phase ODP motor before ordering where rotation matters.
What horsepower ratings are listed for three phase ODP motors?
Three Phase ODP Motors listed here include 3/4 HP, 1 HP, 1-1/2 HP, 2 HP, and 3 HP ratings. Pick the horsepower from the old nameplate or the load requirement. Speeds such as 1800 RPM and 1725 RPM are listed on several models.
Do these motors have ball bearings?
Several Three Phase ODP Motors list ball bearings, including the 1-1/2 HP, 2 HP, and 3 HP models. The 1-1/2 HP model lists double sealed ball bearings, and the 2 HP model's description cites permanently lubricated sealed bearings. Check the individual listing for bearing details.
Which of these motors has an auto protector?
Among the three phase ODP motors listed here, the 1-1/2 HP Century model lists an auto protector along with Class B insulation and a 1.15 service factor. Other models do not state it in their listings, so verify thermal protection on the specific motor before ordering.