'/%3E%3C/svg%3E)
 --%3E %3Csvg version='1.1' id='Fill' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23F15C02' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
 --%3E %3Csvg version='1.1' id='Half' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cg%3E %3Cpath fill='%23F15C02' d='M30.05,70.23l3.79-12.01L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1h1.58 L93.71,7.18c-3.58-3.82-8.66-6.23-14.28-6.23H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,5.41,2.22,10.32,5.79,13.88 L30.05,70.23z'/%3E %3C/g%3E %3Cpath fill='%23FBC8B4' d='M93.71,7.18L60.98,39.6H91.2L65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82l5.55-17.59L6.75,93.32 c3.55,3.54,8.44,5.73,13.82,5.73h58.87c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,15.4,97.01,10.69,93.71,7.18z'/%3E %3C/svg%3E){kind=small}
MANUALS (4)
'/%3E%3C/svg%3E){kind=small}
Product Highlights
Description
Please Note:
- Supply adapters must be purchased separately and are required to install this product.
- T-Handle is included with this MINIBLOC
- 53601: MANABLOC Supply End Cap does not come included and must be purchased separately.
- **Requires 1/2" PEX Full Circle Crimp Tool.
**Important**
- The MANABLOC plumbing system carries a maximum pressure/temperature rating of 100 psi @ 180°F. Excessive pressure to the MANABLOC will cause leaks.
- Do not allow chemicals such as PVC glues or solder flux to come into contact with the MANABLOC. They will compromise the integrity of the MANABLOC and cause leaks.
- Please consult the MANABLOC install instructions for a more comprehensive list of chemical materials that will cause harm to the MANABLOC plumbing system.
PolyAlloy PEX Crimp MINIBLOCs provide a zone manifold for the plumbing system. These MINIBLOCs use 1/2" distribution lines. All PolyAlloy PEX Crimp MINIBLOCs include port Crimp connections, drill templates, instruction guide, faceplate and port labels.
The SKU number represents all blue valves. Red valve caps are included to designate hot water lines.
Specs
| Number of Outlets: | 3 |
|---|---|
| Port Size: | 1/2" |
| Loop Size: | 1/2" |
| Material: | Plastic |
| Tubing Compatibility: | PEX |
| Application: | Plumbing |
| Lead Free: | Yes |
Contact
Happy Independence Day!
You May Also Need
2 Replacement Parts
Need help finding a replacement part?
Product Reviews
Most Liked Positive Review
This is my second time using this product
Most Liked Negative Review
 --%3E %3Csvg version='1.1' id='With-RB' xmlns='http://www.w3.org/2000/svg' xmlns:xlink='http://www.w3.org/1999/xlink' x='0px' y='0px' viewBox='0 0 100 100' enable-background='new 0 0 100 100' xml:space='preserve'%3E %3Cpath fill='%23FBC8B4' d='M79.44,0.95H20.56C9.78,0.95,0.95,9.78,0.95,20.56v58.87c0,10.79,8.82,19.61,19.61,19.61h58.87 c10.79,0,19.61-8.83,19.61-19.61V20.56C99.05,9.78,90.22,0.95,79.44,0.95z M65.38,58.24l9.38,29.58L49.69,69.78L24.5,87.82 l9.34-29.6L8.8,39.6l30.73-0.17c0,0,6.98-19.61,10-28.93c0.54,1.36,9.88,29.1,9.88,29.1H91.2L65.38,58.24z'/%3E %3C/svg%3E){kind=small}
Plastic, flimsy
Like it
East yo install
yes
Great product
I bought two of this product to fix my RV
good people ,good service
Plastic, flimsy
I will buy this product again
I would buy this again
Decent product for the price
Product Q&A
20 QuestionsQ: My water supply coming into the house is 5/8", is there an adapter to use the miniblock?
Asked by scaryjoe 14 years ago
Add your answer
Verified Reply- PexSupply StaffThere is no 5/8" adapter that can connect directly to the MINIBLOC, but you can connect to the 3/4" threaded adapter with a proper fitting or transition to 3/4" piping in line.
Q: I usually supply 3/4" to the master bath to supply the multiple heads in the shower area. Is there a minibloc that will allow me to do this while supplying 1/2" to the other fixtures?
Asked by Bill 14 years ago
Add your answer
Verified Reply- PexSupply StaffYou can use 3/4" adapters on the two supply ports on each MINIBLOC. Depending on how you pipe the rest of the system, this could allow you to use one of these ports to supply 3/4" hot and cold lines to your shower using a hot and cold MINIBLOC.
I'm pretty sure that mini blocks supply only 1/2 inch loads. But they have a 3/4 inch feed-through port (which does not have a built-in valve). So you would use the block for the 1/2 inch loads. If you want a 3/4 line for the shower then branch the 3/4 line off before the miniblock, or feed the 3/4 line using the outlet port of the miniblock. (make sure that you have the adapter to connect to this outlet port. In my experience, if you have good water pressure, and if you run a dedicated line to the shower, a 1/2 line gives you pretty good flow. And with the 1/2 line, it won't take long for the water to get hit when you start the shower.
Q: What are the physical dimensions, in inches, for the different minibloc sizes?
Asked by Bill 14 years ago
Add your answer
Verified Reply- PexSupply StaffThe 10-port crimp MINIBLOC measures approximately 20" x 4" x 2.5".
I recently purchased a 3/8 inch, 4 port minibloc. It approx. 9-1/2 inches in length by 2-3/4 inch in width by 4 inches in height. The port size will not really affect the overall dimensions. The port number will affect the length. I would guess that a 10 port minibloc would have a length of 20-21 inches.
Q: Can these miniblocs be connected end to end with an additional miniblock?
Asked by Bill 14 years ago
Add your answer
Verified Reply- PexSupply StaffYes, part 50355 allows you to connect MINIBLOC units together.
Yes, with a Minibloc coupling.
Q: Do they have mounting bracket?
Asked by khanh 14 years ago
Add your answer
Verified Reply- PexSupply StaffYes, a pair of mounting brackets are included with MINIBLOC units. The brackets must be screwed or nailed to the wall, and the manifold snaps to the brackets.
The mounting brackets (flat plates) are supplied. You screw them (2) to the wall and then you snap the minibloc to it prior to installing the water lines.
Yes.
Yes they do.
Yes. The unit just snaps into the mounting bracket. Sent from my iPhone
I installed an 8 port and a 10 port. They both came with a mounting bracket. My recollection is that you screw the mounting bracket to the wall (or whatever) and the manifold then clicks in to the mounting bracket. I had purchased some metal strips that the website implied I would need. Never used them... Have no idea what they are for. Have been happy with these miniblocks and will use them again
Yes, the manablock came with a mounting bracket. You screw the mounting backet(s) down, and then snap the manifold into the brackets. Very sturdy. -Aaron
Yes Here we go STEELERS here we go!
Q: Is there a mounting rack that comes with the unit? How do you mount this?
Asked by demoply 14 years ago
Add your answer
Verified Reply- PexSupply StaffThe MINIBLOC includes a pair of mounting clips that must be secured to the wall. The MINIBLOC snaps into these clips.
Q: Are these miniblocs strong and durable? Are they suitable to use in a hot environment such as an attic?
Asked by Tampa Mike 14 years ago
Add your answer
Verified Reply- PexSupply StaffMINIBLOCs are durable. Like MANABLOCs, they can be installed in an attic as long the conditions there remain below the maximum ratings of 180°F at 100psi. You'll also want to make sure water does not freeze in the unit during cold winter conditions.
Q: I am using both 1" cold water and 3/4" hot water supply lines, how do I determine the size of the supply ports when ordering? Do they all come with 3/4" port so that my 1" must be reduced at the miniblock?
Asked by joe 15 years ago
Add your answer
Verified Reply- PexSupply StaffAll MINIBLOCs and MANABLOCs come with supply threads that measure about 1" and are unique to these products. You must order (separately) proper supply adapters ( http://www.pexsupply.com/MANABLOC-Supply-Adapters-764000 ). The adapters are available for either 3/4" or 1" PEX Press, PEX crimp, or NPT connections.
Q: when it is refered to as a "crimp style manifold", my stainless clamp will work in place of the copper crimp ring correct?
Asked by 15 years ago
Add your answer
Verified Reply- PexSupply StaffCrimp-style manifolds work with either copper crimps or stainless steel clamps.
Q: Is the inlet supply 3/4"? can I use the same 3/4" supply adaptor that the Manabloc would use?
Asked by J 15 years ago
Add your answer
Verified Reply- PexSupply StaffYes, you can use the same supply adapters.