Wireless Requirements:
VisionPRO 8000 with RedLINK is a 7 day programmable touchscreen thermostat that is selectable for residential or light commercial use. The thermostat can be wired directly to the equipment, used with the THM5421R1021 Equipment Interface Module or used with the THM4000R1000 TrueZONE Wireless Adapter. Works with the RedLINK accessories including the RedLINK Internet Gateway, Portable Comfort Control, Wireless Outdoor Sensor, Wireless Indoor Sensor, Wireless Entry/Exit Remote and Wireless Vent and Filter Boost Remote.
Features:
| Features: | RedLINK Enabled |
|---|---|
| Application: | Multi-Stage (Heat/Cool) Heat Pump Internet control of RedLINK thermostats |
| Changeover: | Manual Auto |
| Color: | Premier White |
| Mount: | Horizontal |
| Stages: | 3 Heat/2 Cool Heat Pump |
| User Interface: | Touchscreen |
| Options: | Auto Changeover Large Display Wireless Keypad Lockout |
| Programmability: | 7 Day Programmable |
| Warranty: | 5 Year |
| Wireless: | Yes |
| Humidity Control: | No |
| Voltage: | 24V 750mV |
| Wi-Fi: | Yes |
The outdoor sensor is part C7089R1013. To enable redlink functions, you either need to have the thermostat hardwired (C wire), or be utilizing an EIM.
Yes sensors can be hardwired in that thermostat.
No, it will not.
This would only be possible if only the electric baseboard is set up for low (24) voltage controls. If it's line voltage control, then no it won't work.
yes it will work, these thermostats do have an optional remote temp. sensor available.
This is not possible on Honeywell VisionPRO thermostats. They only offer the option of locking the screen through the installer setup menu (which can be overridden by anyone who gains access to the manual). We would recommend a Robertshaw i2 Series thermostat if you need a thermostat with a lockout code.