Apply to be a TradeMaster!
Filter menu expanded

Filters

462,990 items
Reset

SORT

Wilo Z-15 Pump Parts

Help Face
Need a little help?
462990 items
Grid
List
Compare
Product Image of 6" In-Line Duct Heater (1 kW, 120V)
$654.00 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of #12 Red Conical Anchor Kit w/ Hex Head Combo Drive Screws
$22.79 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of Flue Exhaust, 71W26
Flue Exhaust, 71W26
SKU: 71W26
Lennox
SKU: 71W26
Brand: Lennox
(1)
$30.71 each
In Stock
Get 4 by Wed, Nov 25
In Stock
Get 4 by Wed, Nov 25
Compare
Product Image of Top Panel, 1779415PS
Top Panel, 1779415PS
SKU: 1779415PS
Goodman-Amana
SKU: 1779415PS
(1)
$141.11 each
In Stock
Get 1 by Wed, Nov 25
In Stock
Get 1 by Wed, Nov 25
Compare
Product Image of Clubmaster Showerhead 3-Jet, 2.5 GPM (Chrome), 28496001
$209.99 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of MKC-2E 120V WC Coil
MKC-2E 120V WC Coil
SKU: 310671
Sporlan
SKU: 310671
Brand: Sporlan
(1)
$197.39 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of Horizontal Drain Pan, 343314-75104
Horizontal Drain Pan, 343314-75104
SKU: 343314-75104
Carrier
SKU: 343314-75104
Brand: Carrier
(1)
$424.13 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of HPC-307-S-HH 7/8" ODF Solder Heat Pump Filter Drier 8 to 20 Ton (30 Cubic Inches)
$139.58 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of Drain Spud, 4356-CARRIER
Drain Spud, 4356-CARRIER
SKU: 4356-CARRIER
Carrier
SKU: 4356-CARRIER
Brand: Carrier
(1)
$6.18 each
BOX UP & SAVE 3%
$35.94 box of 6
$5.99 each
In Stock
Get 18 by Wed, Nov 25
In Stock
Get 18 by Wed, Nov 25
Compare
Product Image of Main Burner Orifice #45, 661045R
Main Burner Orifice #45, 661045R
SKU: 661045R
Nordyne
SKU: 661045R
Brand: Nordyne
$16.36 each
In Stock
Get 25 by Tue, Nov 24
In Stock
Get 25 by Tue, Nov 24
Compare
Product Image of Plug In 8 Pin Relay, DPDT, Cylindrical Terminals (120V)
$46.77 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Bearings for 5 HP Motor, 86H56
Bearings for 5 HP Motor, 86H56
SKU: 86H56
Lennox
SKU: 86H56
Brand: Lennox
$103.54 each
In Stock
Get 40 by Wed, Nov 25
In Stock
Get 40 by Wed, Nov 25
Compare
Product Image of 10kw Heater Kit M#h8hk010h-01a, 922525D
$210.97 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of TorqTitan Gripnotch Belt w/ 61.3" Pitch
$28.88 each
In Stock
Get 22 by Tue, Nov 24
In Stock
Get 22 by Tue, Nov 24
Compare
Product Image of 180-632v 3 phase Line Monitor, CNT05176
180-632v 3 phase Line Monitor, CNT05176
SKU: CNT05176
Trane
SKU: CNT05176
Brand: Trane
$82.17 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Electric Non-Spring Return Floating without Timeout Actuator
$116.96 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 460V Motor - 1 HP, 1125 RPM, 3 Phase, MOT17979
460V Motor - 1 HP, 1125 RPM, 3 Phase, MOT17979
SKU: MOT17979
Trane
SKU: MOT17979
Brand: Trane
(1)
$611.18 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of Totaline 1/3 HP 115V 1075 RPM Reversible Rotation Blower Motor, P257-8585
$145.10 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of Sensitive Differential Pressure Switch w/ "U" Bracket (0.05" to 5.0" WC)
$136.94 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of RE180e 180,000 BTU, Non-Condensing Outdoor Tankless Water Heater (Propane)
$1,091.16 each
In Stock
Get 45 by Wed, Nov 25
In Stock
Get 45 by Wed, Nov 25
Compare
Product Image of 5/8" x 5/8" 3 Ton TXV w/ 30" Cap. (R410A), S1-1TVM4G1
5/8" x 5/8" 3 Ton TXV w/ 30" Cap. (R410A), S1-1TVM4G1
SKU: S1-1TVM4G1
York
SKU: S1-1TVM4G1
Brand: York
(2)
$212.05 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 5/8" x 5/8" 4 Ton R410A TXV w/ 30" Capillary, S1-1TVM4H1
$152.49 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of Combination Gas Valve, SP12541B
Combination Gas Valve, SP12541B
SKU: SP12541B
Rheem
SKU: SP12541B
Brand: Rheem
(2)
$358.87 each
In Stock
Get 11 by Fri, Nov 27
In Stock
Get 11 by Fri, Nov 27
Compare
Product Image of 1075 RPM Condenser Fan Motor (1/3 HP), 01-0162
$125.72 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 10/2 UF-B Copper Underground Feeder & Branch Circuit Cable w/ Ground Wire (100' Coil)
$238.19 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 3/4" Sweat FlowCal Automatic Flow Balancing Valve (2 GPM)
$106.97 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of 2" PVC Sch. 40 Threaded Tee (FIPT)
2" PVC Sch. 40 Threaded Tee (FIPT)
SKU: 405-020
SKU: 405-020
(2)
$7.26 each
BOX UP & SAVE 11%
$64.50 box of 10
$6.45 each
In Stock
Get 30 by Tue, Nov 24
In Stock
Get 30 by Tue, Nov 24
Compare
Product Image of 2" x 1" PVC Sch. 40 90° Elbow
2" x 1" PVC Sch. 40 90° Elbow
SKU: 406-249
SKU: 406-249
(63)
$5.16 each
BOX UP & SAVE 10%
$46.50 box of 10
$4.65 each
In Stock
Get 63 by Tue, Nov 24
In Stock
Get 63 by Tue, Nov 24
Compare
Product Image of 6133T 2" CTS Stainless Steel Insert Stiffener, 1.60" OD
$4.59 each
In Stock
Get 16 by Tue, Nov 24
In Stock
Get 16 by Tue, Nov 24
Compare
Product Image of 3.5KW Heater Assembly, 22312903
3.5KW Heater Assembly, 22312903
SKU: 22312903
Goodman-Amana
SKU: 22312903
(4)
$126.90 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of 12" x 16" (Wall Opening Size) White Return Air Grille (650 Series)
$69.60 each
In Stock
Get 11 by Tue, Nov 24
In Stock
Get 11 by Tue, Nov 24
Compare
Product Image of Media Ground Assembly for Model 5000 Air Cleaners
$27.12 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 1-1/2" x 1" x 1-1/2" CxCxC Reducing Tee
$55.92 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 1-1/4" x 1/2" x 1-1/4" ProPress Copper Tee
$66.95 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 1-1/4" x 3/4" 90° PVC Insert Reducing Elbow (Insert x FIPT)
$3.65 each
BOX UP & SAVE 10%
$82.00 box of 25
$3.28 each
In Stock
Get 27 by Tue, Nov 24
In Stock
Get 27 by Tue, Nov 24
Compare
Product Image of ARMflo E7.2B Bronze Circulator, 0-38 GPM Flow
$957.00 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of 6" PVC SDR 35 1/8 Bend 45° Elbow (G x G)
$40.17 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 1/2", 3/4", 1" Galvanized Steel Triple Pipe Bracket (4-1/2" x 4" x1-1/2")
$2.85 each
In Stock
Get 240 by Tue, Nov 24
In Stock
Get 240 by Tue, Nov 24
Compare
Product Image of 115/230V Mechanical Float Switch w/ 25' Cord
$61.50 each
In Stock
Get 50 by Tue, Nov 24
In Stock
Get 50 by Tue, Nov 24
Compare
Product Image of 1/2" CXC Tile Stop Rough-In Valve
$31.96 each
In Stock
Get 42 by Tue, Nov 24
In Stock
Get 42 by Tue, Nov 24
Compare
Product Image of Universal Sensor - (15' wire)
$103.41 each
In Stock
Get 1 by Wed, Nov 25
In Stock
Get 1 by Wed, Nov 25
Compare
Product Image of 2 Piece Escutcheon for FR-QR Sprinklers, 3/4" Adjustment (White)
$1.07 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 1-1/2" x 1-1/2" x 3/4" PVC Barbed Insert Reducing Tee (Insert x Insert x Insert)
$6.53 each
BOX UP & SAVE 9%
$59.50 box of 10
$5.95 each
In Stock
Get 112 by Tue, Nov 24
In Stock
Get 112 by Tue, Nov 24
Compare
Product Image of 3" PVC Schedule 80 45° Street Elbow (Spigot x Socket)
$45.31 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 3.5" Tee - LT92W (White)
3.5" Tee - LT92W (White)
SKU: 84015
Fortress
SKU: 84015
Brand: Fortress
$38.25 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 60A Fused A/C Disconnect w/ Top Open (240V)
$70.45 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of 103687-01 1/3 HP Variable Speed ECM Condenser Fan Motor, 1 Phase (208/230V), 98W65
$362.55 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of 3/4" Thinwall EMT 90-Degree Conduit Elbow
3/4" Thinwall EMT 90-Degree Conduit Elbow
SKU: 82-SOUTHWIRE
Southwire
SKU: 82-SOUTHWIRE
Brand: Southwire
$3.77 each
BOX UP & SAVE 7%
$174.50 box of 50
$3.49 each
In Stock
Get 50 by Tue, Nov 24
In Stock
Get 50 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Articles
More About Wilo Z-15 Pump Parts

Wilo Z-15 pump parts are the replacement components contractors use to service and rebuild Z-15 wet-rotor circulator pumps found in residential and light commercial hydronic heating and hot water recirculation systems. The Z-15 is a single-speed, in-line circulator, and its most commonly replaced parts are the pump head, rotor and impeller assembly, and the mounting gaskets that seal the pump body to the piping flanges. Over years of continuous operation, mineral buildup and worn bearings inside the wet-rotor cartridge are the usual reasons a Z-15 needs a rebuild rather than a full replacement. Keeping gaskets, cartridges, and mounting hardware on hand lets a contractor return a system to service the same day instead of waiting on a full pump swap, which matters most on boiler systems where extended downtime affects a building's heat.

Subcategories

  • Pump Heads: Pump heads house the motor and electrical connections for the Z-15 circulator and bolt directly onto the wet-rotor cartridge below. Contractors replace a pump head when the motor windings fail or a bad capacitor stops the rotor from starting, rather than swapping the entire unit. Because the head separates from the wet end without draining the whole system in most installations, it's often the fastest single-part repair on a Z-15. Matching the voltage and speed rating to the original nameplate keeps the replacement head compatible with the existing wiring.
  • Rotor & Impeller Assemblies: The rotor and impeller assembly is the wet-rotor cartridge that spins inside the pump body to move water through the system. Mineral scale and sediment are the most common causes of a sluggish or seized rotor, especially in older cast iron hydronic loops. Replacing the assembly restores full flow without needing to replace the pump housing or motor head. A worn sleeve bearing inside the assembly is usually what causes the humming or grinding noise contractors hear before a Z-15 fails outright.
  • Mounting Gaskets & Flanges: Mounting gaskets seal the pump body against the flanges that connect it to the supply and return piping. A worn or improperly seated gasket is one of the most common sources of a slow weep leak at the pump union. Flanges themselves rarely need replacement unless they've been damaged during a prior installation or corroded from years of exposure to boiler water. Keeping the correct gasket size on hand avoids a return trip when a routine pump service uncovers a leak at the union.
  • Cartridge Seal Kits: Cartridge seal kits bundle the O-rings and shaft seals needed to reseal the wet-rotor cartridge after it's opened for cleaning or bearing replacement. Using a complete kit instead of individual seals reduces the chance of missing a small O-ring that causes a repeat callback. Seal kits are typically sized to the specific cartridge generation, so matching the kit to the pump's production era matters more than matching it to the overall Z-15 model name alone. A fresh seal kit is standard practice any time the cartridge is removed for service, even if the old seals look intact.
  • Buying Guide

    When sourcing Wilo Z-15 pump parts, start with the failure symptom rather than guessing at a full parts list. A pump that hums but doesn't spin usually points to a seized rotor or worn bearing, calling for a rotor and impeller assembly rather than a new pump head. A pump that won't start electrically, or trips a breaker, more often points to the motor windings or capacitor inside the pump head itself. Confirm the exact age and cartridge generation of the installed unit before ordering, since Wilo has updated the internal cartridge design over the years and parts from a newer cartridge don't always fit an older pump body. For jobs where the pump has been in continuous service for many years, rebuilding with a full cartridge seal kit alongside the rotor assembly is often more efficient than replacing components piecemeal, since it addresses wear across the whole wet end in one visit. Keep a small stock of the most commonly needed Wilo Z-15 pump parts, gaskets, seal kits, and a spare pump head, on hand for routine hydronic service calls, since these are the components most likely to fail from years of continuous operation. For a pump that's failed catastrophically or is several rebuilds in already, replacing the entire unit is often the more practical long-term choice over continuing to source individual parts.

    Frequently Asked Questions

    How do I know if my Wilo Z-15 needs a new pump head or a full rotor assembly?

    If the pump is silent and doesn't spin at all, check the motor head first, since that usually points to a failed capacitor or burned winding. If the pump hums or vibrates but the rotor won't turn, the wet-rotor cartridge itself is more likely the problem. Testing continuity at the motor terminals before ordering parts helps confirm which component actually failed.

    Can I rebuild a Z-15 without draining the whole heating system?

    In most installations, the pump head separates from the wet-rotor cartridge without opening the main piping, so a motor swap doesn't require draining the loop. Replacing the cartridge, gaskets, or flanges does require isolating and draining the pump section, though the rest of the system can often stay filled if isolation valves are present. Always confirm the specific installation has isolation valves before promising a no-drain repair.

    Why does my Z-15 keep leaking at the union even after a new gasket?

    A repeat leak after a gasket replacement is usually a sign the flange itself is corroded, warped, or wasn't torqued evenly during installation. Overtightening a new gasket can also distort it and cause the same leak to return. Checking the flange surface for pitting and torquing bolts in a cross pattern typically resolves a recurring union leak.

    How long does a Z-15 cartridge seal kit typically last?

    Seal life depends heavily on water quality and how often the system cycles, so there's no single fixed interval for every installation. Systems with harder water or more mineral content tend to wear seals faster than closed loops with treated water. Replacing the seal kit any time the cartridge is opened for service, rather than waiting for a visible leak, helps avoid a repeat callback.

    Is it worth rebuilding an older Z-15 or should I replace the whole pump?

    A rebuild makes sense when the pump body and flanges are still in good condition and only the wet-rotor cartridge or motor head has failed. Once a pump has needed several rebuilds over a short period, or the housing itself shows corrosion, replacing the entire unit is usually the more practical option. Weighing the age of the installation against the parts already on hand helps make that call quickly during a service visit.