FlowRite Globe Valve Actuator Combos are Siemens valve and actuator products used to control hot water, chilled water, 50% water-glycol solutions, and steam. The Flowrite 599 Series two-way valve bodies are ANSI 250 and work with a Flowrite series actuator with a 3/4-inch (20 mm) stroke. Listings in this group include 2-way and 3-way bodies in brass and stainless steel, in normally open and normally closed configurations, with female NPT end connections. Listed flow capacities include 2.5 Cv on a 1/2-inch 3-way brass body and 25 Cv on a 1-1/2-inch 2-way stainless steel body. Several models list ANSI Leakage Class IV (0.01% of Cv) and cartridge-type packing. Matching the body style, trim material, flow capacity, and actuator range to the application is what keeps a control loop stable and serviceable, so the details on each listing matter before an order goes in.
Subcategories
Buying Guide
Start with the control job. Choose a 2-way body to control a single flow path and a 3-way body for mixing applications. Then confirm whether the loop needs a normally open or normally closed valve, because that defines the valve's resting position.
Next, size by flow capacity. Listings in the FlowRite Globe Valve Actuator Combos category show Cv values such as 2.5, 4.0, 6.3, and 25, so compare each against the required flow and pressure drop instead of matching pipe size alone. Connection size and type matter too. Listed examples use female NPT ends, in sizes including 1/2-inch, 3/4-inch, and 1-1/2-inch.
Check body material and trim next. Brass and stainless steel bodies are both listed, with equal percentage flow offered in brass or stainless steel trim and linear flow offered with stainless steel trim. Fluid type counts as well, because typical 599 Series applications include hot or chilled water, 50% water-glycol solutions, or steam.
Finally, match the actuator. The 599 Series bodies work with a Flowrite series actuator with a 3/4-inch stroke, and the pressure range, such as 3 to 8 psi or 10 to 15 psi, has to suit the system. The 1-1/2-inch 2-way model lists a 4 to 20 mAdc control signal, so confirm the controller output matches before ordering.
Frequently Asked Questions
What are FlowRite Globe Valve Actuator Combos used for?
FlowRite Globe Valve Actuator Combos from Siemens are used to control hot or chilled water, 50% water-glycol solutions, or steam, based on the Flowrite 599 Series application notes. Confirm the fluid and operating conditions on the specific listing before selecting a model.
What's the difference between normally open and normally closed FlowRite valve actuators?
FlowRite Globe Valve Actuator Combos include both configurations. A normally open model, such as the 1/2-inch 2-way stainless steel valve at 4.0 Cv, stays open until the actuator closes it, while a normally closed model, such as the 3/4-inch 2-way stainless steel valve at 6.3 Cv, stays closed until the actuator opens it. Choose the resting position that fits how the loop should behave.
Do FlowRite Globe Valve Actuator Combos come in 3-way bodies as well as 2-way?
Yes. FlowRite Globe Valve Actuator Combos include 2-way bodies and 3-way bodies, such as the 1/2-inch 3-way brass mixing valve actuator at 2.5 Cv. Check the body pattern on each listing against the piping layout.
What leakage class do the FlowRite globe valves list?
Several FlowRite Globe Valve Actuator Combos list ANSI Leakage Class IV, which is 0.01% of Cv, along with cartridge-type packing. Confirm the leakage rating on the exact model before specifying it.
Can I use a pneumatic or electronic actuator on these globe valves?
The 3/4-inch 2-way normally closed stainless steel model in FlowRite Globe Valve Actuator Combos is listed as accepting any 3/4-inch Flowrite pneumatic or electronic actuator. The 599 Series bodies work with a Flowrite series actuator with a 3/4-inch stroke. Confirm actuator compatibility on the specific listing before ordering.