Shop Grundfos ECM Promotion
Main product image of UPS15-58FC, 3-Speed Circulator Pump, 1/25 HP, 115 volt
Magnifying glass
Hover image to zoom

UPS15-58FC, 3-Speed Circulator Pump, 1/25 HP, 115 volt

Brand:
Grundfos
SKU:
59896341
Rating:
(373)
Q&A:
(64)
UPS15-58FC, 3-Speed Circulator Pump, 1/25 HP, 115 volt
Magnifying glass
Hover image to zoom
$150.80 each
In Stock
In Stock
Get 2,358 Tue, Nov 24
Order by today, receive Tuesday
Free Shipping This item ships free
Easy Returns No restocking fee for 90 days

Product Highlights

–
Product Highlight: Voltage
115V
Product Highlight: Horse Power
1/25 HP
Product Highlight: Connection Type
Flanged x Flanged Connection
Product Highlight: Max Flow (GPM)
17 MAX GPM
Product Highlight: Max Pressure (PSI)
145 MAX PSI
Product Highlight: Amperage
0.75 Amps

Description

–

Grundfos UPS15-58FC 3-Speed Circulator Pump, 1/25 HP, 115 Volt

The Grundfos UPS15-58FC is a 3-speed cast iron circulator pump designed for residential and light commercial hydronic heating applications, including boilers, radiant floor heating, and hot water recirculation systems. This 1/25 HP, 115-volt pump features a maintenance-free canned rotor design with an integrated check valve and accepts multiple flange sizes (3/4", 1", 1-1/4", and 1-1/2"). The unit delivers flow rates from 0 to 17 GPM and operates across three selectable speeds for optimized performance.

Key Features & Benefits

  • 3-Speed Motor: Adjustable speed settings allow optimization of flow rate and energy consumption to match system requirements.
  • Canned Rotor Design: Integrates motor and pump into a single maintenance-free unit with no mechanical shaft seal, reducing leak risk and wear.
  • Integral Check Valve: Built-in check valve prevents backflow when the pump is not operating, with removable design for applications requiring unrestricted flow.
  • Cast Iron Construction: Corrosion-resistant impeller and durable cast iron housing ensure long-term reliability.
  • Multi-Size Flange Compatibility: Accepts 3/4", 1", 1-1/4", and 1-1/2" flanged connections for flexible installation options.
  • Compact Design: Space-saving dimensions enable installation in tight mechanical rooms and boiler areas.
  • Low-Noise Operation: Designed for quiet residential environments during continuous operation.
  • Flow Capacity: Delivers up to 17 GPM maximum flow rate on high speed setting.
  • Head Range: Provides 0 to 19.5 feet of head depending on speed selection.
  • Operating Temperature Range: Handles system temperatures from 36°F to 230°F.
  • Maximum Pressure Rating: Rated for systems up to 145 PSI.
  • Power Consumption: Draws 0.75 amps at 115 volts single phase, 60 Hz.
  • Speed-Specific Performance: Speed 1 delivers 0-11 GPM, Speed 2 delivers 0-15 GPM, Speed 3 delivers 0-17.5 GPM (flow varies with head pressure).
  • RPM Rating: Operates at 2450 RPM on high speed.
  • Two-Pole Motor: 60 Hz, single-phase electrical design.
  • Frequency: 60 Hz.
  • Material: Cast Iron.
  • Suitable for Zoning Applications
  • Replaces Models: HMCIR01, 59896248, 59896178, 8056173, 59896155.

Compatibility & Requirements

Flanges must be purchased separately and matched to the specific pipe connection size in your system. The pump requires flange pairs sized for 3/4", 1", 1-1/4", or 1-1/2" connections depending on your piping configuration. Select flanges based on connection type: NPT threaded, sweat (solder), or press-fit connections are available. Installation should be performed by a qualified professional familiar with hydronic heating systems and local plumbing codes. System must be properly sized to ensure the pump's flow and head characteristics match the heating load and pipe friction losses. Verify that electrical service provides 115 volts AC, 60 Hz single-phase power. The pump shaft must be installed in a horizontal position, though piping can run vertically or horizontally. Confirm system operating pressure does not exceed 145 PSI and operating temperature remains between 36°F and 230°F. For systems with multiple zones, consider whether the integral check valve should remain installed or be removed to prevent flow restriction.

Installation & Care

Shut off power and drain the system section where the pump will be installed. Mount the pump with the motor shaft in a horizontal orientation and the pump body positioned to allow the flow direction arrow on the housing to match system flow direction. Install flange pairs on inlet and outlet pipes, ensuring gaskets are properly seated. Bolt the pump to the flanges using the provided hardware, tightening nuts evenly in a crisscross pattern. If removing the check valve for unrestricted flow applications, break apart the plastic valve assembly and extract the core using needle-nose pliers, then remove the remaining retention ring from the casting groove. Confirm all electrical connections are de-energized, then wire the pump according to the wiring diagram on the motor housing. Refill the system and purge all air from the piping and pump body through system bleed valves. Restore power and select the initial speed setting. Monitor the system for several heating cycles and adjust speed up or down as needed to achieve proper circulation and even heat distribution. Check for leaks at flange connections within the first 24 hours of operation. Inspect the pump quarterly for unusual noise, vibration, or heat. Maintain proper system water treatment to prevent scale buildup and corrosion. The high speed setting (87 watts) draws approximately 10% more power than medium speed and is designed for continuous operation when higher flow rates are required. Maximum flow through 3/4" Type M copper tube is 6 GPM; exceeding this rate can erode the tube. Recommended flow is 1 to 4 GPM per zone. For unequal length zones, install a circuit balancing valve on the shorter zone and set flow between 1 to 4 GPM, then adjust pump speed for the second zone. Excessive noise in baseboards indicates high flow rates.

What's Included

  • UPS15-58FC circulator pump
  • Square profile flange gaskets (standard)
  • Mounting bolts and hardware for flange connection

Frequently Asked Questions

Q: Can I install this pump with the flow direction from top to bottom in a vertical pipe run?
A: Yes, the pump can be installed in vertical piping with flow from top to bottom or bottom to top, provided the motor shaft remains in a horizontal position. Pumping upward allows a constant gravity-fed supply to ensure the pump does not run dry, which can cause seal failure.

Q: Should I remove the check valve for my application?
A: If replacing a pump that did not have a check valve built in, you likely don't need it. Removing the check valve will give slightly more flow. Check valves prevent backflow; if backflow is not a concern, remove it. To remove, break apart the plastic valve assembly, extract the core with needle-nose pliers, and remove the retention ring from the groove. The pump operates efficiently with or without the check valve installed.

Specs

–
Frequency:

60 Hz

60 Hz

60 Hz

Amperage:

0.75

Application:

Zoning

Poles:

2

Material:

Cast Iron

Voltage:

115V

Max Pressure (PSI):

145

Type:

3-Speed Pump

Features:

Integral Check Valve

Horse Power:

1/25

Flow Range (GPM):

0-17

Max Flow (GPM):

17

Max Head (Ft):

19.5

Head Range (ft.):

0-19.5

Hertz:

60

Phase:

1

RPM:

2450

Temperature Range (F):

36°F - 230°F

Connection Size:

1-1/4"

1"

1-1/2"

3/4"

Connection Type:

Flanged x Flanged

Help Face

Questions?

Speak with a real person who will go out of the way to help!
Call or text 888-757-4774
Monday – Thursday
8am–7:45pm
Friday
9am–7:45pm
Saturday – Sunday
9am–5:45pm


QUICK SUPPORT

Order StatusShipping PolicyReturnsIs My Item in Stock?Request Item for Site

Compare Similar Products

Brand
Voltage
Max Pressure (PSI)
Type
Max Flow (GPM)
Temperature Range (F)
CURRENT ITEM
Product Image of UPS15-58FC, 3-Speed Circulator Pump, 1/25 HP, 115 volt
UPS15-58FC, 3-Speed Circulator Pump, 1/25 HP, 115 volt
SKU: 59896341
(373)
115V
145
3-Speed Pump
17
36°F - 230°F
115V
145
3-Speed Pump
17
36°F - 230°F
115V
145
Circulator Pumps
15
32°F to 104°F

You May Also Need

1" Press Full Port Forged Brass Uni-Flange Isolator Flange
SKU: 81404HV
Webstone

3 Replacement Parts

Nut/Bolt/Gasket Set
SKU: 519610
Grundfos
Help Image
Need help finding a replacement part?
Fill out the part request form and someone will get back to you shortly.
PART REQUEST FORM

Product Reviews

4.83 out of 373 reviews
98% would recommend this product
4.83
out of 373 Reviews
98% would recommend this product
WRITE A REVIEW
5 star
89%
4 star
8%
3 star
1%
2 star
0%
1 star
2%
WRITE A REVIEW
Customer Images

Most Liked Positive Review

Easy Out & Easy In with Exact Replacement Parts

The pump arrived in two days, well packaged and protected during shipping. This pump being an exact/duplicate replacement made very quick work to change out the 10 year old pump that failed.
VS

Most Liked Negative Review

Time will tell

This pump comes from the manufacturer with a pre installed plastic check valve. I wish I had a better understanding of the configuration before purchasing. In the description, this check valve is described as removable if not needed and less restricted flow is desired. The instruction regarding how the check valve is removed is not helpful. By design, the only way to remove the valve is by breaking it apart, pulling the core out with needle nose pliers, fracturing the brittle plastic into many small pieces. There remains a plastic retaining ring that is so deeply seated into a retention grove in the casting of the pump, I could find not find a tool small enough to fit, yet strong enough to remove that last part of the valve assembly. The instructions do caution against leaving any of the valve assembly in the pump, but I could find not a way to remove it. Given the sub zero temps, I could not wait for another pump to be delivered to this remote location… so I went ahead with the install. Not sure if I will leave the pump in place, or look for an alternative that does not have a check valve… time will tell.
Showing 1-10 of 373 reviews

Pump seems good, not impressed with plastic parts.

Have an older 26-99 that is built like a tank. Bought this pump for an outdoor wood stove and was a little disappointed in the quality. The pump itself seems fine but the control boxes are now made of thin plastic (the older grundfos and tacos I have are all metal). Would not be a big deal except it arrived damaged, I assume during shipment. Though the box did not look beat up The lever for the speed switch was stripped out and the switch stem was bent. The cover itself does not sit tight even with the screws all the way tight. The pump still runs fine and the speed can still be adjusted by carefully twisting the switch stem with the cover off. Not like I am gonna be adjusting it often anyway. Hopefully they put all the quality into the pump itself, but time will tell. Grundfos has a great reputation so I hope this one lives up to it.
Woodcutter
Rockingham, VA
16 days ago
Was this review helpful to you?

Would buy again

An affordable pump
Duddles58
Rapid City sd
2 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

yes

This product is being used to circulate water for our baptistry tank in the church. This pump does a very nice job of keeping the water stirred. There are no localized areas where the temperature is not the same throughout the tank. Very quiet operation.
Curt
Adrian, MO
3 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

yes

great customer service
rhinebone
Illinois
8 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

I will continue to buy from Supplyhouse.com

The pump I bought was exact replacement. Service was great, shipping speed extremely fast. Bought Thursday afternoon, had item next afternoon. Thanks team.
BG
Wichita, KS
8 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

Great pump

This pump works great for my radiant floor system.
GeoMan
Wisconsin
8 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

good

trustable brand
spud
larchwood
9 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

Great delivery time

Check valve needs to be installed and it is a very tight fit. Works well.
GWIL
MD
9 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

Great product

Great product, bought as a spare circulator for my boiler heating system.
Dundee
Boston
9 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

A solid little work horse

This little Grundfos pump is a solid work horse! Heating a 2K sqft home with radiant floor heat. We tried one of the green pumps with all the fancy electronics, just a hot mess of problems. Way too over engineered. This Groundfos has 3 speeds with out the electronics mess and just works with out problems!
Bubba J
Tulsa OK
10 months ago
Verified Buyer Icon
Verified Buyer
Was this review helpful to you?

Product Q&A

64 Questions
64 Questions
ASK A QUESTION

Q: Is this pump suitable for potable water? I have CPVC pipes, including a 3/4" recirculating line. My pump often stops, whereas the Grundfos pumps I had in previous houses were much more reliable. There I had copper pipes, and thus bronze pumps.

Asked by RSaunders 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

No. You need a bronze pump.

Was this review helpful to you?

Q: what do the three speeds do and how should this pump be set?

Asked by 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

The three-speed technology is designed to reduce noise & power consumption. The best way for you to set the pump depends on what you will be using it for, but general instructions can be found in the manual: http://s3.pexsupply.com/manuals/1293801581942/42920_PROD_FILE.pdf

Was this review helpful to you?
- [email protected]

High speed pumps more g.p.m. and uses more wattage. You can adjust to your application. This way it can replace several different models of pumps by setting it to what works best at the lowest wattage.

Was this review helpful to you?

Q: I have 6 300 foot loops of 1/2" pex for my in floor heating system all running off this one pump. My floors are still cold is that to much for this pump?

Asked by Matt 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

The answer depends on how many zone valves are on the loops. The pump may be too small if there is only one.

Was this review helpful to you?

Q: Can my Bell Gossett Cirulator pumps NRF 22 103 1M50 be replaced with your SKU #59896341 UPS15-58FC Grundfos pump I want to order 5 - SKU #59896341 UPS15-58FC but need to make sure they will fit I'm told they should

Asked by time 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

Yes, the UPS15-58FC is a 3-speed pump and will replace the NRF22103 1M50. We suggest contacting a licensed plumber to confirm if this unit is compatible with your piping.

Was this review helpful to you?

Q: The manuals listed on the site do not have a mechanical drawing or dimensions of the pump. Can you add a link to a drawing?

Asked by Dave Do It Myself 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

The following link is to the document provided by the manufacturer, as it should contain the necessary mechanical/wiring diagrams: http://s3.pexsupply.com/manuals/1293801581942/42920_PROD_FILE.pdf . The next link provides the dimensions of the UPS15-58 pump: http://s3.pexsupply.com/manuals/1249544647674/Grundfos_ups15-58fc_Product_Data.pdf .

Was this review helpful to you?

Q: Re: UPS15-58FC 3-speed Grundfos pump, can you quantify the gpm per each of the 3 speeds and the amperage consumed at each speed?

Asked by GB 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

Please take a look at the owner's manual. Here is the link: http://s3.pexsupply.com/manuals/1293801581942/42920_PROD_FILE.pdf .

Was this review helpful to you?

Q: should my pump be getting hot even if it is not circulating hot water

Asked by 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

No, the pump should not get hot when it is not circulating hot water. We suggest calling a licensed technician in your area to service and inspect your pump.

Was this review helpful to you?

Q: Can this be used -maybe on low speed- for a 1/2 inch recirculation line?

Asked by Kenoo2 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

Yes, it can be used in that application.

Was this review helpful to you?

Q: What speed to i need to run my UPS 15 58fc pump I'm pushing hot water about 70 ft. in 3/4 tubing then into a 5 head manifold for rad. heat????

Asked by 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

You need to run it on Speed 3.

Was this review helpful to you?

Q: On other Grundfos pumps I own there is an "indicator plug" in the middle of the name plate which can be removed to access the shaft (and this procedure is described in the instructions enclosed with this new pump) but the UPS15-58 pump has no indicator plug. How does one access the shaft on this pump?

Asked by Usonian 16 years ago

Add your answer

* Required Field
Verified Author and ReplyVerified Reply- PexSupply Staff

You do not need to access the shaft on the new pump. The new UPS15-58 is now a self lubricated pump. It is known as the “wet rotor pump”.

Was this review helpful to you?
Free Shipping
On orders over $99
We offer flexible shipping and scheduling options, up-to-date delivery estimates, and free ground shipping on any order over $99 to make sure your order gets to you on-time, for less.
Shipping Policy
Easy Returns
Returning items is as simple as 1-2-3
Ordered the wrong product? Item damaged in transit? Our 3-step process makes returning products easy – even up to a year after purchase – with no restocking fees on returns made within 90 days.
Return Policy