Apply to be a TradeMaster!
Filter menu expanded

Filters

462,995 items
Reset

SORT

Wilo Z-15 Pump Parts

Help Face
Need a little help?
462995 items
Grid
List
Compare
Product Image of 212°F Fuse Link
212°F Fuse Link
SKU: 12543
Firomatic
SKU: 12543
Brand: Firomatic
$10.20 each
In Stock
Get 4 by Fri, Nov 27
In Stock
Get 4 by Fri, Nov 27
Compare
Product Image of 14" x 2" (Wall Opening Size) White Toe-Space Grille (420 Series)
$14.24 each
In Stock
Get 28 by Tue, Nov 24
In Stock
Get 28 by Tue, Nov 24
Compare
Product Image of 3" Z-Vent Horizontal Termination Elbow (45°)
3" Z-Vent Horizontal Termination Elbow (45°)
SKU: 2SVSTEX0345
Z-FLEX
SKU: 2SVSTEX0345
Brand: Z-FLEX
(3)
$76.64 each
In Stock
Get 11 by Tue, Nov 24
In Stock
Get 11 by Tue, Nov 24
Compare
Product Image of #10 Yellow Wing Conical Anchor Kit w/ Hex Head Combo Drive Screws
$22.79 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of Flame Rod Replacement, 105000146
Flame Rod Replacement, 105000146
SKU: 105000146
Rinnai
SKU: 105000146
Brand: Rinnai
$25.05 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of Ignition Module w/ Wire Harness, 19M54
$597.29 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of 1/2" MNPT x 1/2" FNPT RVW17 934,000 BTU Bronze Relief Valve (150 psi)
$67.35 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 5.5" x 6' Slimduct Duct Line Set Cover (Ivory)
$111.68 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 2" FTG x 3/4" Press Copper Reducer
2" FTG x 3/4" Press Copper Reducer
SKU: 50140
JW
SKU: 50140
Brand: JW
(3)
$43.14 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 10" Round Zone Damper (Normally Open/Power Close)
10" Round Zone Damper (Normally Open/Power Close)
SKU: 6610-APR
Aprilaire
SKU: 6610-APR
Brand: Aprilaire
$158.35 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 3/4" PowerPEX Copper Stub Out Elbow w/ Ear (4-1/2" x 8")
$15.07 each
BOX UP & SAVE 5%
$359.25 box of 25
$14.37 each
In Stock
Get 135 by Tue, Nov 24
In Stock
Get 135 by Tue, Nov 24
Compare
Product Image of 16.5" Tongue and Groove Pliers
$38.43 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of FML12 Exh./Sup. Hood, 12"
FML12 Exh./Sup. Hood, 12"
SKU: 45150
Fantech
SKU: 45150
Brand: Fantech
$163.62 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 1-1/4" x 1/2" Brass Saddle Tee
1-1/4" x 1/2" Brass Saddle Tee
SKU: 451603
Matco-Norca
SKU: 451603
Brand: Matco-Norca
(2)
$7.53 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 3" Wrot Copper Flange (Lead Free)
3" Wrot Copper Flange (Lead Free)
SKU: 46470
Elkhart
SKU: 46470
Brand: Elkhart
(2)
$46.99 each
In Stock
Get 6 by Wed, Nov 25
In Stock
Get 6 by Wed, Nov 25
Compare
Product Image of 1/4" x 6" Shockwave Carbide Hammer Drill Bit
$7.97 each
In Stock
Get 47 by Tue, Nov 24
In Stock
Get 47 by Tue, Nov 24
Compare
Product Image of Pressure Assist 1.6 gpf/6.0 Lpf Left-Hand Trip Lever EverClean Tank
$358.81 each
In Stock
Get 270 by Tue, Nov 24
In Stock
Get 270 by Tue, Nov 24
Compare
Product Image of 2" x 5" Stainless Steel Nipple
2" x 5" Stainless Steel Nipple
SKU: 4032-500
Merit Brass
SKU: 4032-500
Brand: Merit Brass
(4)
$16.46 each
BOX UP & SAVE 9%
$149.30 box of 10
$14.93 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 24" x 20" (Wall Opening Size) White Sidewall/Ceiling Return Air Filter Grille (673 Series)
$86.22 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 1" x 3/4" x 1/2" CxCxC Reducing Tee
1" x 3/4" x 1/2" CxCxC Reducing Tee
SKU: 32842-ELKHART
Elkhart
SKU: 32842-ELKHART
Brand: Elkhart
(209)
$21.98 each
BOX UP & SAVE 20%
$175.80 box of 10
$17.58 each
In Stock
Get 11 by Tue, Nov 24
In Stock
Get 11 by Tue, Nov 24
Compare
Product Image of A-1106-A Rebuild Kit, Urinal Exposed- Boxed (0.5 GPF)
$44.99 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 2000W Restring Kit (480V)
2000W Restring Kit (480V)
SKU: 34630
MARS
SKU: 34630
Brand: MARS
$56.68 each
In Stock
Get 30 by Tue, Nov 24
In Stock
Get 30 by Tue, Nov 24
Compare
Product Image of 1/2" FIP x  3/8" OD Comp x 3/8" OD Comp Dual Outlet Valve, Lead Free (Chrome Plated)
$39.60 each
In Stock
Get 1 by Fri, Nov 27
In Stock
Get 1 by Fri, Nov 27
Compare
Product Image of 3/4" Normally Closed Gas Shutoff Valve, 120v (512,000 BTU)
$301.65 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 1-1/2" Slotted ABS Flush Plug w/ Threaded Brass Insert
$1.86 each
BOX UP & SAVE 8%
$43.00 box of 25
$1.72 each
In Stock
Get 53 by Mon, Nov 30
In Stock
Get 53 by Mon, Nov 30
Compare
Product Image of 4" Non-Metallic Octagon Ceiling Box, 2-1/8" Depth, 20.5 Cubic Inch, New Work
$4.23 each
In Stock
Get 141 by Tue, Nov 24
In Stock
Get 141 by Tue, Nov 24
Compare
Product Image of 4" Dual Hood
4" Dual Hood
SKU: 99-194
LifeBreath
SKU: 99-194
Brand: LifeBreath
(1)
$195.54 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Rehvac Drain Kat Drain Suction Device
$45.10 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of Panasonic MERV 8 Replacement Air Filter for Intelli-Balance 200, FV-FL0820VE1
$134.99 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of Three Hole Corner Plate Fitting (Zinc)
$5.91 each
BOX UP & SAVE 3%
$143.50 box of 25
$5.74 each
In Stock
Get 34 by Wed, Nov 25
In Stock
Get 34 by Wed, Nov 25
Compare
Product Image of 2" x 3/4" Galvanized Malleable Hex Bushing
$8.00 each
BOX UP & SAVE 13%
$139.40 box of 20
$6.97 each
In Stock
Get 20 by Tue, Nov 24
In Stock
Get 20 by Tue, Nov 24
Compare
Product Image of 2" CamLock Type DC Dust Cap
2" CamLock Type DC Dust Cap
SKU: CAMDC08
Matco-Norca
SKU: CAMDC08
Brand: Matco-Norca
$11.35 each
BOX UP & SAVE 8%
$83.52 box of 8
$10.44 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 3/4" FIP Corrugated Super-Flex Water Heater Connector, 3/4" ID (48" Length)
$27.57 each
BOX UP & SAVE 0%
$689.25 box of 25
$27.57 each
In Stock
Get 21 by Tue, Nov 24
In Stock
Get 21 by Tue, Nov 24
Compare
Product Image of 10 Amp Dual Element Time-Delay Class RK5 Fuse (250V)
$9.21 each
In Stock
Get 16 by Tue, Nov 24
In Stock
Get 16 by Tue, Nov 24
Compare
Product Image of Fill Valve (No Riser)
Fill Valve (No Riser)
SKU: PRO747
Fluidmaster
SKU: PRO747
Brand: Fluidmaster
(6)
$23.40 each
In Stock
Get 15 by Tue, Nov 24
In Stock
Get 15 by Tue, Nov 24
Compare
Product Image of 2.75" Track Mount Pilot Relay 15 Amp SPDT w/ 24 VAC/DC Coil
$18.95 each
In Stock
Get 25 by Tue, Nov 24
In Stock
Get 25 by Tue, Nov 24
Compare
Product Image of Combustion Probe Cone Lock for CAT45 & CAT85
$48.74 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of Assorted Rotalock Teflon Gaskets (Pack of 5)
$31.56 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Master Flow Replacement Power Attic Vent Motor, 1/9 HP, 200W
$86.09 each
In Stock
Get 1 by Wed, Nov 25
In Stock
Get 1 by Wed, Nov 25
Compare
Product Image of 1-1/2" PVC DWV Flush Cleanout Plug
1-1/2" PVC DWV Flush Cleanout Plug
SKU: P110-015
SKU: P110-015
(34)
$7.01 each
BOX UP & SAVE 10%
$315.50 box of 50
$6.31 each
In Stock
Get 4,609 by Tue, Nov 24
In Stock
Get 4,609 by Tue, Nov 24
Compare
Product Image of 3/4" Water Meter Coupling Gasket Only (Box of 25)
$79.77 each
In Stock
Get 4 by Fri, Nov 27
In Stock
Get 4 by Fri, Nov 27
Compare
Product Image of Blower Motor, HD46AQ269
Blower Motor, HD46AQ269
SKU: HD46AQ269
Carrier
SKU: HD46AQ269
Brand: Carrier
$613.43 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of 1/8" Journeyman T-Handle Hex Key (9" Long)
$4.79 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of T304 3/8" Stainless Steel Tee
T304 3/8" Stainless Steel Tee
SKU: K406-06
Merit Brass
SKU: K406-06
Brand: Merit Brass
(9)
$5.63 each
BOX UP & SAVE 9%
$128.75 box of 25
$5.15 each
In Stock
Get 573 by Tue, Nov 24
In Stock
Get 573 by Tue, Nov 24
Compare
Product Image of 1-1/2" Press Brass Magnetic Boiler Filter XL
$265.49 each
In Stock
Get 3 by Wed, Nov 25
In Stock
Get 3 by Wed, Nov 25
Compare
Product Image of True Blue Bath Waste Trim Kit w/ Touch Toe Stopper (Chrome)
$8.62 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 3/8" to 1" OD Tube with 1/4" OD Compression Self-Piercing Needle Valve Kit
$14.11 each
In Stock
Get 10 by Wed, Nov 25
In Stock
Get 10 by Wed, Nov 25
Compare
Product Image of 2" Standard Fill Tank Cap, OMH130
2" Standard Fill Tank Cap, OMH130
SKU: OMH130
OMI Parts
SKU: OMH130
Brand: OMI Parts
(1)
$7.74 each
In Stock
Get 16 by Wed, Nov 25
In Stock
Get 16 by Wed, Nov 25
Resources
FAQs, Manuals & Videos
Articles
More About Wilo Z-15 Pump Parts

Wilo Z-15 pump parts are the replacement components contractors use to service and rebuild Z-15 wet-rotor circulator pumps found in residential and light commercial hydronic heating and hot water recirculation systems. The Z-15 is a single-speed, in-line circulator, and its most commonly replaced parts are the pump head, rotor and impeller assembly, and the mounting gaskets that seal the pump body to the piping flanges. Over years of continuous operation, mineral buildup and worn bearings inside the wet-rotor cartridge are the usual reasons a Z-15 needs a rebuild rather than a full replacement. Keeping gaskets, cartridges, and mounting hardware on hand lets a contractor return a system to service the same day instead of waiting on a full pump swap, which matters most on boiler systems where extended downtime affects a building's heat.

Subcategories

  • Pump Heads: Pump heads house the motor and electrical connections for the Z-15 circulator and bolt directly onto the wet-rotor cartridge below. Contractors replace a pump head when the motor windings fail or a bad capacitor stops the rotor from starting, rather than swapping the entire unit. Because the head separates from the wet end without draining the whole system in most installations, it's often the fastest single-part repair on a Z-15. Matching the voltage and speed rating to the original nameplate keeps the replacement head compatible with the existing wiring.
  • Rotor & Impeller Assemblies: The rotor and impeller assembly is the wet-rotor cartridge that spins inside the pump body to move water through the system. Mineral scale and sediment are the most common causes of a sluggish or seized rotor, especially in older cast iron hydronic loops. Replacing the assembly restores full flow without needing to replace the pump housing or motor head. A worn sleeve bearing inside the assembly is usually what causes the humming or grinding noise contractors hear before a Z-15 fails outright.
  • Mounting Gaskets & Flanges: Mounting gaskets seal the pump body against the flanges that connect it to the supply and return piping. A worn or improperly seated gasket is one of the most common sources of a slow weep leak at the pump union. Flanges themselves rarely need replacement unless they've been damaged during a prior installation or corroded from years of exposure to boiler water. Keeping the correct gasket size on hand avoids a return trip when a routine pump service uncovers a leak at the union.
  • Cartridge Seal Kits: Cartridge seal kits bundle the O-rings and shaft seals needed to reseal the wet-rotor cartridge after it's opened for cleaning or bearing replacement. Using a complete kit instead of individual seals reduces the chance of missing a small O-ring that causes a repeat callback. Seal kits are typically sized to the specific cartridge generation, so matching the kit to the pump's production era matters more than matching it to the overall Z-15 model name alone. A fresh seal kit is standard practice any time the cartridge is removed for service, even if the old seals look intact.
  • Buying Guide

    When sourcing Wilo Z-15 pump parts, start with the failure symptom rather than guessing at a full parts list. A pump that hums but doesn't spin usually points to a seized rotor or worn bearing, calling for a rotor and impeller assembly rather than a new pump head. A pump that won't start electrically, or trips a breaker, more often points to the motor windings or capacitor inside the pump head itself. Confirm the exact age and cartridge generation of the installed unit before ordering, since Wilo has updated the internal cartridge design over the years and parts from a newer cartridge don't always fit an older pump body. For jobs where the pump has been in continuous service for many years, rebuilding with a full cartridge seal kit alongside the rotor assembly is often more efficient than replacing components piecemeal, since it addresses wear across the whole wet end in one visit. Keep a small stock of the most commonly needed Wilo Z-15 pump parts, gaskets, seal kits, and a spare pump head, on hand for routine hydronic service calls, since these are the components most likely to fail from years of continuous operation. For a pump that's failed catastrophically or is several rebuilds in already, replacing the entire unit is often the more practical long-term choice over continuing to source individual parts.

    Frequently Asked Questions

    How do I know if my Wilo Z-15 needs a new pump head or a full rotor assembly?

    If the pump is silent and doesn't spin at all, check the motor head first, since that usually points to a failed capacitor or burned winding. If the pump hums or vibrates but the rotor won't turn, the wet-rotor cartridge itself is more likely the problem. Testing continuity at the motor terminals before ordering parts helps confirm which component actually failed.

    Can I rebuild a Z-15 without draining the whole heating system?

    In most installations, the pump head separates from the wet-rotor cartridge without opening the main piping, so a motor swap doesn't require draining the loop. Replacing the cartridge, gaskets, or flanges does require isolating and draining the pump section, though the rest of the system can often stay filled if isolation valves are present. Always confirm the specific installation has isolation valves before promising a no-drain repair.

    Why does my Z-15 keep leaking at the union even after a new gasket?

    A repeat leak after a gasket replacement is usually a sign the flange itself is corroded, warped, or wasn't torqued evenly during installation. Overtightening a new gasket can also distort it and cause the same leak to return. Checking the flange surface for pitting and torquing bolts in a cross pattern typically resolves a recurring union leak.

    How long does a Z-15 cartridge seal kit typically last?

    Seal life depends heavily on water quality and how often the system cycles, so there's no single fixed interval for every installation. Systems with harder water or more mineral content tend to wear seals faster than closed loops with treated water. Replacing the seal kit any time the cartridge is opened for service, rather than waiting for a visible leak, helps avoid a repeat callback.

    Is it worth rebuilding an older Z-15 or should I replace the whole pump?

    A rebuild makes sense when the pump body and flanges are still in good condition and only the wet-rotor cartridge or motor head has failed. Once a pump has needed several rebuilds over a short period, or the housing itself shows corrosion, replacing the entire unit is usually the more practical option. Weighing the age of the installation against the parts already on hand helps make that call quickly during a service visit.