Apply to be a TradeMaster!
Filter menu expanded

Filters

460,971 items
Reset

SORT

Wilo Z-15 Pump Parts

Help Face
Need a little help?
460971 items
Grid
List
Compare
Product Image of SPST N/C Limit, 160 Open, 140 Close, 47-25349-01K
SPST N/C Limit, 160 Open, 140 Close, 47-25349-01K
SKU: 47-25349-01K
Rheem
SKU: 47-25349-01K
Brand: Rheem
$9.69 each
Out of Stock
Get it by Tue, Dec 8 - Tue, Dec 15
Out of Stock
Get it by Tue, Dec 8 - Tue, Dec 15
Compare
Product Image of Pressure Switch, 42-105499-01
Pressure Switch, 42-105499-01
SKU: 42-105499-01
Rheem
SKU: 42-105499-01
Brand: Rheem
(2)
$15.91 each
Out of Stock
Get it by Tue, Dec 8 - Tue, Dec 15
Out of Stock
Get it by Tue, Dec 8 - Tue, Dec 15
Compare
Product Image of 3" PVC DWV 60° Street Elbow
3" PVC DWV 60° Street Elbow
SKU: P320-030
SKU: P320-030
(4)
$20.64 each
BOX UP & SAVE 7%
$384.20 box of 20
$19.21 each
In Stock
Get 14 by Tue, Nov 24
In Stock
Get 14 by Tue, Nov 24
Compare
Product Image of C-417-S 7/8" ODF Solder Liquid Line Filter Drier 5 to 15 Ton (41 Cubic Inches)
C-417-S 7/8" ODF Solder Liquid Line Filter Drier 5 to 15 Ton (41 Cubic Inches)
SKU: 401614
Sporlan
SKU: 401614
Brand: Sporlan
$107.54 each
In Stock
Get 13 by Tue, Nov 24
In Stock
Get 13 by Tue, Nov 24
Compare
Product Image of Brushed Nickel 5-1/2" Diverter Tub Spout, Slip-fit, 40911BN
$45.30 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of 2" PEM Dual Scale Economy Pressure Gauge (0-30 PSI)
$9.57 each
In Stock
Get 101 by Tue, Nov 24
In Stock
Get 101 by Tue, Nov 24
Compare
Product Image of Vent Cap Kit, 904106
Vent Cap Kit, 904106
SKU: 904106
Nordyne
SKU: 904106
Brand: Nordyne
(1)
$122.61 each
In Stock
Get 22 by Tue, Nov 24
In Stock
Get 22 by Tue, Nov 24
Compare
Product Image of 60 MFD Round Run Capacitor (370V)
60 MFD Round Run Capacitor (370V)
SKU: 12727
Jard
SKU: 12727
Brand: Jard
$12.65 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 40/5 MFD Round Capacitor (370V), 01-0084
40/5 MFD Round Capacitor (370V), 01-0084
SKU: 01-0084
Nordyne
SKU: 01-0084
Brand: Nordyne
(6)
$12.58 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 2 Stage IGN Control Circuit Board, 63W26
$298.89 each
In Stock
Get 14 by Wed, Nov 25
In Stock
Get 14 by Wed, Nov 25
Compare
Product Image of 1/30 HP 3000 RPM Blower Assembly (208/230), 74K77
$493.16 each
In Stock
Get 22 by Tue, Nov 24
In Stock
Get 22 by Tue, Nov 24
Compare
Product Image of DHC-E 8/10-2 Plus Tankless Electric Water Heater
$349.00 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 1/2" FTGxC 90° Long Turn Street Elbow
$9.82 each
BOX UP & SAVE 20%
$196.50 box of 25
$7.86 each
In Stock
Get 62 by Tue, Nov 24
In Stock
Get 62 by Tue, Nov 24
Compare
Product Image of Standard Submersible Motor Control Box (1 HP, 230V, 1 Phase)
$152.00 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of 8' Quarter Circle Pattern Spray Nozzle (Green)
$0.99 each
In Stock
Get 25 by Tue, Nov 24
In Stock
Get 25 by Tue, Nov 24
Compare
Product Image of 8' Variable Adjustable Arc 0-Degree to 330-Degree Spray Nozzle (Green)
$0.99 each
In Stock
Get 77 by Tue, Nov 24
In Stock
Get 77 by Tue, Nov 24
Compare
Product Image of 18 SOL UF Copper Single-Conductor Underground Feeder Wire - Blue (500' Spool)
$89.80 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of SMARTSHOT UV Solvent-Free Leak Detector Dye (Pack of 6)
$42.33 each
In Stock
Get 19 by Tue, Nov 24
In Stock
Get 19 by Tue, Nov 24
Compare
Product Image of Round Tub Trip Lever w/ 2" Screws
Round Tub Trip Lever w/ 2" Screws
SKU: DRT-A
Bluefin
SKU: DRT-A
Brand: Bluefin
(1)
$3.48 each
BOX UP & SAVE 8%
$80.25 box of 25
$3.21 each
In Stock
Get 178 by Tue, Nov 24
In Stock
Get 178 by Tue, Nov 24
Compare
Product Image of 1-1/2" Galvanized Malleable 90-Degree Street Elbow
$9.91 each
BOX UP & SAVE 20%
$71.46 box of 9
$7.94 each
In Stock
Get 34 by Tue, Nov 24
In Stock
Get 34 by Tue, Nov 24
Compare
Product Image of 1/2" Hose Barb x 3/4" NPT Male Brass Pipe Adapter
$8.38 each
In Stock
Get 58 by Tue, Nov 24
In Stock
Get 58 by Tue, Nov 24
Compare
Product Image of 3/4" x 3/4" x 1/2" PEX Press Reducing Tee w/ Attached Sleeve (Zero Lead Bronze)
$11.84 each
BOX UP & SAVE 3%
$114.30 box of 10
$11.43 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 1-1/2" x 6" Plastic Flanged Tailpiece
$2.19 each
In Stock
Get 12 by Fri, Nov 27
In Stock
Get 12 by Fri, Nov 27
Compare
Product Image of 1-1/2" Bath Waste T-Waste Half Kit - CP Lift & Turn Drain w/ 2 Hole Face Plate (PVC)
$20.87 each
In Stock
Get 149 by Wed, Nov 25
In Stock
Get 149 by Wed, Nov 25
Compare
Product Image of 2" PVC Sch. 80 Van Stone Flange (Socket x Solid Ring)
$18.21 each
BOX UP & SAVE 11%
$162.70 box of 10
$16.27 each
In Stock
Get 88 by Tue, Nov 24
In Stock
Get 88 by Tue, Nov 24
Compare
Product Image of 2" ProPEX EP Coupling
2" ProPEX EP Coupling
SKU: Q4772020
Uponor (Wirsbo)
SKU: Q4772020
(35)
$37.47 each
In Stock
Get 20 by Tue, Nov 24
In Stock
Get 20 by Tue, Nov 24
Compare
Product Image of PWS2 - PEX to Wood Staples (Qty of 200)
$115.14 each
In Stock
Get 38 by Tue, Nov 24
In Stock
Get 38 by Tue, Nov 24
Compare
Product Image of 1/4" Flare Copper Access Tee on 5/8" Copper Tube w/ 1/4" Flare Brass Wrench Cap and Valve Core (Pack of 2)
$11.32 each
In Stock
Get 14 by Tue, Nov 24
In Stock
Get 14 by Tue, Nov 24
Compare
Product Image of Model E100V Whole House Dehumidifier (100 Pint Per Day)
$2,058.73 each
In Stock
Get 7 by Tue, Nov 24 - Fri, Nov 27
In Stock
Get 7 by Tue, Nov 24 - Fri, Nov 27
Compare
Product Image of 1/2" x 3/8" Oil Tank Valve, MIP x Flare, 125 psi
$21.46 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 1/2" Zinc Straight Squeeze Connector
$0.91 each
In Stock
Get 609 by Tue, Nov 24
In Stock
Get 609 by Tue, Nov 24
Compare
Product Image of Model V22 8", 1/2" MPT x Sweat Inlet Vertical Hot & Cold Anti-Siphon Wall Faucet w/ Metal Handle
$126.69 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of RN Series Inline Radon Fan, 4.5" Pipe (169 CFM)
$217.53 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of EBV570A Bushing Assembly Straight Kit
EBV570A Bushing Assembly Straight Kit
SKU: 3325507
Sloan
SKU: 3325507
Brand: Sloan
(1)
$3.90 each
In Stock
Get 37 by Tue, Nov 24
In Stock
Get 37 by Tue, Nov 24
Compare
Product Image of 15" x 20" x 2" Fiberglass Throw Away Replacement Filter
$5.25 each
BOX UP & SAVE 6%
$59.40 box of 12
$4.95 each
In Stock
Get 24 by Tue, Nov 24
In Stock
Get 24 by Tue, Nov 24
Compare
Product Image of Combustible Gas Sensor
$64.90 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Non-Metallic Floor Box for Installed Floors w/ Flip Plugs (Almond)
$19.05 each
BOX UP & SAVE 5%
$72.40 box of 4
$18.10 each
In Stock
Get 16 by Tue, Nov 24
In Stock
Get 16 by Tue, Nov 24
Compare
Product Image of Fully Insulated Dead End Connector Solderless Terminal, 18-10 AWG (50 Pack)
$12.37 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of Burner, 3.0x4.5, Cmf95/m7, 661135R
Burner, 3.0x4.5, Cmf95/m7, 661135R
SKU: 661135R
Nordyne
SKU: 661135R
Brand: Nordyne
$14.05 each
In Stock
Get 20 by Fri, Nov 27
In Stock
Get 20 by Fri, Nov 27
Compare
Product Image of 1-1/4" x 3/4" PVC Sch. 80 Flush Style Reducer Bushing (Spigot x FPT)
$6.57 each
BOX UP & SAVE 8%
$151.75 box of 25
$6.07 each
In Stock
Get 73 by Tue, Nov 24
In Stock
Get 73 by Tue, Nov 24
Compare
Product Image of PLUS II 3-Pack 1/4" Charging Hoses w/ Compact Ball Valve (36" Length)
$169.19 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 3/4" I.D. Stainless Steel Flex Connector, 3/4" FIP (36" Length)
$23.18 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of 4" x Close Black Nipple
4" x Close Black Nipple
SKU: NPBL4000
Everflow
SKU: NPBL4000
Brand: Everflow
(28)
$21.04 each
BOX UP & SAVE 14%
$270.90 box of 15
$18.06 each
In Stock
Get 31 by Tue, Nov 24
In Stock
Get 31 by Tue, Nov 24
Compare
Product Image of 16-1/4" x 21" x 3/8" Permanent Filter, 68-101807-02
16-1/4" x 21" x 3/8" Permanent Filter, 68-101807-02
SKU: 68-101807-02
Rheem
SKU: 68-101807-02
Brand: Rheem
(29)
$15.30 each
In Stock
Get 27 by Wed, Nov 25
In Stock
Get 27 by Wed, Nov 25
Compare
Product Image of M18 Redlithium High Output CP 3.0 Battery Pack (Two Pack)
$199.00 each
In Stock
Get 20 by Tue, Nov 24
In Stock
Get 20 by Tue, Nov 24
Compare
Product Image of Tankless Coil Gasket, 240007071
Tankless Coil Gasket, 240007071
SKU: 240007071
Utica-Dunkirk
SKU: 240007071
(1)
$29.63 each
In Stock
Get 8 by Wed, Nov 25
In Stock
Get 8 by Wed, Nov 25
Compare
Product Image of Limit Switch 145F with Manual Reset, 626499R
$18.26 each
In Stock
Get 25 by Tue, Nov 24
In Stock
Get 25 by Tue, Nov 24
Compare
Product Image of Ignitor for Housing 120/50-60Hz
Ignitor for Housing 120/50-60Hz
SKU: 63873-SER
Wayne Combustion
SKU: 63873-SER
$143.98 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Articles
More About Wilo Z-15 Pump Parts

Wilo Z-15 pump parts are the replacement components contractors use to service and rebuild Z-15 wet-rotor circulator pumps found in residential and light commercial hydronic heating and hot water recirculation systems. The Z-15 is a single-speed, in-line circulator, and its most commonly replaced parts are the pump head, rotor and impeller assembly, and the mounting gaskets that seal the pump body to the piping flanges. Over years of continuous operation, mineral buildup and worn bearings inside the wet-rotor cartridge are the usual reasons a Z-15 needs a rebuild rather than a full replacement. Keeping gaskets, cartridges, and mounting hardware on hand lets a contractor return a system to service the same day instead of waiting on a full pump swap, which matters most on boiler systems where extended downtime affects a building's heat.

Subcategories

  • Pump Heads: Pump heads house the motor and electrical connections for the Z-15 circulator and bolt directly onto the wet-rotor cartridge below. Contractors replace a pump head when the motor windings fail or a bad capacitor stops the rotor from starting, rather than swapping the entire unit. Because the head separates from the wet end without draining the whole system in most installations, it's often the fastest single-part repair on a Z-15. Matching the voltage and speed rating to the original nameplate keeps the replacement head compatible with the existing wiring.
  • Rotor & Impeller Assemblies: The rotor and impeller assembly is the wet-rotor cartridge that spins inside the pump body to move water through the system. Mineral scale and sediment are the most common causes of a sluggish or seized rotor, especially in older cast iron hydronic loops. Replacing the assembly restores full flow without needing to replace the pump housing or motor head. A worn sleeve bearing inside the assembly is usually what causes the humming or grinding noise contractors hear before a Z-15 fails outright.
  • Mounting Gaskets & Flanges: Mounting gaskets seal the pump body against the flanges that connect it to the supply and return piping. A worn or improperly seated gasket is one of the most common sources of a slow weep leak at the pump union. Flanges themselves rarely need replacement unless they've been damaged during a prior installation or corroded from years of exposure to boiler water. Keeping the correct gasket size on hand avoids a return trip when a routine pump service uncovers a leak at the union.
  • Cartridge Seal Kits: Cartridge seal kits bundle the O-rings and shaft seals needed to reseal the wet-rotor cartridge after it's opened for cleaning or bearing replacement. Using a complete kit instead of individual seals reduces the chance of missing a small O-ring that causes a repeat callback. Seal kits are typically sized to the specific cartridge generation, so matching the kit to the pump's production era matters more than matching it to the overall Z-15 model name alone. A fresh seal kit is standard practice any time the cartridge is removed for service, even if the old seals look intact.
  • Buying Guide

    When sourcing Wilo Z-15 pump parts, start with the failure symptom rather than guessing at a full parts list. A pump that hums but doesn't spin usually points to a seized rotor or worn bearing, calling for a rotor and impeller assembly rather than a new pump head. A pump that won't start electrically, or trips a breaker, more often points to the motor windings or capacitor inside the pump head itself. Confirm the exact age and cartridge generation of the installed unit before ordering, since Wilo has updated the internal cartridge design over the years and parts from a newer cartridge don't always fit an older pump body. For jobs where the pump has been in continuous service for many years, rebuilding with a full cartridge seal kit alongside the rotor assembly is often more efficient than replacing components piecemeal, since it addresses wear across the whole wet end in one visit. Keep a small stock of the most commonly needed Wilo Z-15 pump parts, gaskets, seal kits, and a spare pump head, on hand for routine hydronic service calls, since these are the components most likely to fail from years of continuous operation. For a pump that's failed catastrophically or is several rebuilds in already, replacing the entire unit is often the more practical long-term choice over continuing to source individual parts.

    Frequently Asked Questions

    How do I know if my Wilo Z-15 needs a new pump head or a full rotor assembly?

    If the pump is silent and doesn't spin at all, check the motor head first, since that usually points to a failed capacitor or burned winding. If the pump hums or vibrates but the rotor won't turn, the wet-rotor cartridge itself is more likely the problem. Testing continuity at the motor terminals before ordering parts helps confirm which component actually failed.

    Can I rebuild a Z-15 without draining the whole heating system?

    In most installations, the pump head separates from the wet-rotor cartridge without opening the main piping, so a motor swap doesn't require draining the loop. Replacing the cartridge, gaskets, or flanges does require isolating and draining the pump section, though the rest of the system can often stay filled if isolation valves are present. Always confirm the specific installation has isolation valves before promising a no-drain repair.

    Why does my Z-15 keep leaking at the union even after a new gasket?

    A repeat leak after a gasket replacement is usually a sign the flange itself is corroded, warped, or wasn't torqued evenly during installation. Overtightening a new gasket can also distort it and cause the same leak to return. Checking the flange surface for pitting and torquing bolts in a cross pattern typically resolves a recurring union leak.

    How long does a Z-15 cartridge seal kit typically last?

    Seal life depends heavily on water quality and how often the system cycles, so there's no single fixed interval for every installation. Systems with harder water or more mineral content tend to wear seals faster than closed loops with treated water. Replacing the seal kit any time the cartridge is opened for service, rather than waiting for a visible leak, helps avoid a repeat callback.

    Is it worth rebuilding an older Z-15 or should I replace the whole pump?

    A rebuild makes sense when the pump body and flanges are still in good condition and only the wet-rotor cartridge or motor head has failed. Once a pump has needed several rebuilds over a short period, or the housing itself shows corrosion, replacing the entire unit is usually the more practical option. Weighing the age of the installation against the parts already on hand helps make that call quickly during a service visit.