Apply to be a TradeMaster!
Filter menu expanded

Filters

462,995 items
Reset

SORT

Wilo Z-15 Pump Parts

Help Face
Need a little help?
462995 items
Grid
List
Compare
Product Image of 1" Spirocombi Air & Dirt Separator Magnet (Sweat)
$271.39 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 3/8" SharkBite EndStop (Lead Free), U512LFA
$7.48 each
BOX UP & SAVE 15%
$76.56 box of 12
$6.38 each
In Stock
Get 33 by Tue, Nov 24
In Stock
Get 33 by Tue, Nov 24
Compare
Product Image of Max Brass Push Water Heater Connection Kit w/ (2) 3/4" x 3/4" FIP, 18" Stainless Steel Corrugated SharkBite Max Water Heater Connectors & (1) Ball Valve
$56.83 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of FreshVent 4" Galvalume Steel Fresh Air Intake Vent (White)
$43.12 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of Swidget Air Quality Sensor
Swidget Air Quality Sensor
SKU: WI008UWA
Panasonic
SKU: WI008UWA
Brand: Panasonic
(1)
$69.99 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 25/7.5 MFD Round Dual Motor Run Capacitor (440/370V)
$7.85 each
In Stock
Get 15 by Tue, Nov 24
In Stock
Get 15 by Tue, Nov 24
Compare
Product Image of Pressure Switch , 1191552
$115.73 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of 124-149 MFD Round Start Capacitor (165V)
124-149 MFD Round Start Capacitor (165V)
SKU: 11931
Jard
SKU: 11931
Brand: Jard
(5)
$6.75 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of 61, Float Type Low Water Cut-Off (Steam)
$612.46 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of Temperature Sensor Liquid 1, 025-53145-000
Temperature Sensor Liquid 1, 025-53145-000
SKU: 025-53145-000
York
SKU: 025-53145-000
Brand: York
$278.17 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 3/8" Filter Drier, 026-37563-000
3/8" Filter Drier, 026-37563-000
SKU: 026-37563-000
York
SKU: 026-37563-000
Brand: York
$109.02 each
In Stock
Get 13 by Tue, Nov 24
In Stock
Get 13 by Tue, Nov 24
Compare
Product Image of 1-1/2" LF777SI Lead Free Brass Wye Strainer (Threaded)
$280.88 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of 7/8" ODF ASK-307S-W-HH Charcoal Blend Suction Line Filter Drier (30 Cubic Inches)
$75.41 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of Heat Exchanger Cleaning Kit , 100157628
Heat Exchanger Cleaning Kit , 100157628
SKU: 100157628
Lochinvar
SKU: 100157628
Brand: Lochinvar
$400.19 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 5.6" Mojave PSC Condenser Fan Motor (208-230V, 1/4 HP, 1075 RPM)
$163.20 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of 3" ProPress XL-C Copper Coupling w/ Stop
$115.51 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 10" Condensing Vent Pipe Extension for Ultra Series
$58.18 each
In Stock
Get 35 by Wed, Nov 25
In Stock
Get 35 by Wed, Nov 25
Compare
Product Image of 1-1/4" x 1/2" Bronze Monoflo Tee
$12.59 each
In Stock
Get 17 by Tue, Nov 24
In Stock
Get 17 by Tue, Nov 24
Compare
Product Image of Gas Valve Kit, 60-103901-02K
Gas Valve Kit, 60-103901-02K
SKU: 60-103901-02K
Rheem
SKU: 60-103901-02K
Brand: Rheem
$86.60 each
Out of Stock
Get it by Wed, Dec 9 - Wed, Dec 16
Out of Stock
Get it by Wed, Dec 9 - Wed, Dec 16
Compare
Product Image of 1/2" X 3/4" Actuated Gas Valve (150,000 BTU)
$176.38 each
In Stock
Get 24 by Wed, Nov 25
In Stock
Get 24 by Wed, Nov 25
Compare
Product Image of 1/3 HP Motor Assembly, B0189001
$379.65 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of Sensor Module, HK50ZT001
Sensor Module, HK50ZT001
SKU: HK50ZT001
Carrier
SKU: HK50ZT001
Brand: Carrier
$909.95 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of Relay Kit, K71-10
Relay Kit, K71-10
SKU: K71-10
Tecumseh
SKU: K71-10
Brand: Tecumseh
$36.66 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of 8-Pin Octal Socket Wiring Base with Din Rail/Surface Mounting, 10 Amp (600V)
$14.69 each
In Stock
Get 26 by Wed, Nov 25
In Stock
Get 26 by Wed, Nov 25
Compare
Product Image of Dayton Direct Oem Interchange Replacement Unit Heater Motor, A0516b2595, PVLD1
$218.53 each
In Stock
Get 50 by Tue, Nov 24
In Stock
Get 50 by Tue, Nov 24
Compare
Product Image of 1" 5500W Copper Resistored Screw-in Element MWD (240V), SP10552PH
$27.63 each
In Stock
Get 1 by Wed, Nov 25
In Stock
Get 1 by Wed, Nov 25
Compare
Product Image of Limit Switch (145°F Open, 115°F Close), SWT01277
$69.30 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of Electronic Temp Controller w/ 2 Temp Inputs, 2 SPDT Relays, NEMA 4X Enclosure
$441.35 each
In Stock
Get 11 by Tue, Nov 24
In Stock
Get 11 by Tue, Nov 24
Compare
Product Image of Electronic Temp Controller w/ 2 Temp Inputs, 2 SPDT Relays, 2 Analog Outputs, 1 Sensor, NEMA 4X Enclosure
$549.28 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of Type B Solid 80-Degree Brass Oil Nozzle (2.00 GPH), 00200-80B1
$12.79 each
BOX UP & SAVE 13%
$133.56 box of 12
$11.13 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of 1-1/4" - 2" Repair Kit for LFN170M3
1-1/4" - 2" Repair Kit for LFN170M3
SKU: 0125153
Watts
SKU: 0125153
Brand: Watts
(3)
$262.07 each
In Stock
Get 15 by Wed, Nov 25
In Stock
Get 15 by Wed, Nov 25
Compare
Product Image of 1/2" x 3/8" Black 90° Elbow, Class 150
1/2" x 3/8" Black 90° Elbow, Class 150
SKU: 0310007406
Anvil
SKU: 0310007406
Brand: Anvil
$4.33 each
BOX UP & SAVE 6%
$304.50 box of 75
$4.06 each
In Stock
Get 172 by Tue, Nov 24
In Stock
Get 172 by Tue, Nov 24
Compare
Product Image of System Pump Motor Kit
System Pump Motor Kit
SKU: 193-016RP
Taco
SKU: 193-016RP
Brand: Taco
(5)
$230.41 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 3/4" x 3/8" PVC Barbed Insert Spiral Coupling (Insert x Spiral Barb)
$1.84 each
BOX UP & SAVE 10%
$82.50 box of 50
$1.65 each
In Stock
Get 97 by Tue, Nov 24
In Stock
Get 97 by Tue, Nov 24
Compare
Product Image of 1/4" PVC Barbed Insert Male Adapter (MIPT x Insert)
$0.91 each
In Stock
Get 359 by Tue, Nov 24
In Stock
Get 359 by Tue, Nov 24
Compare
Product Image of Blower Outlet Gasket for Alpine Models, 106029-01
$17.51 each
In Stock
Get 3 by Wed, Nov 25
In Stock
Get 3 by Wed, Nov 25
Compare
Product Image of 7/8" OD ACR CxCxC Tee
7/8" OD ACR CxCxC Tee
SKU: 20402
Elkhart
SKU: 20402
Brand: Elkhart
(2)
$5.40 each
BOX UP & SAVE 16%
$113.50 box of 25
$4.54 each
In Stock
Get 21 by Wed, Nov 25
In Stock
Get 21 by Wed, Nov 25
Compare
Product Image of 332V 551 Relay
332V 551 Relay
SKU: 19551
MARS
SKU: 19551
Brand: MARS
(6)
$122.83 each
In Stock
Get 17 by Tue, Nov 24
In Stock
Get 17 by Tue, Nov 24
Compare
Product Image of 250 ft - 18/3 Stranded OAS CL2P (Plenum) Genesis Cable Control Cable
$121.28 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 3/4" Copper CTS Tube Solder O Strap
3/4" Copper CTS Tube Solder O Strap
SKU: 505-39
Sioux Chief
SKU: 505-39
Brand: Sioux Chief
(3)
$0.94 each
In Stock
Get 61 by Tue, Nov 24
In Stock
Get 61 by Tue, Nov 24
Compare
Product Image of PACKOUT Large Magnetic Bin
PACKOUT Large Magnetic Bin
SKU: 48-22-8071
Milwaukee
SKU: 48-22-8071
Brand: Milwaukee
$11.98
$9.98 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 18" x 36" x 1" Fiberglass Throw Away Replacement Filter
$7.46 each
BOX UP & SAVE 6%
$84.48 box of 12
$7.04 each
In Stock
Get 35 by Tue, Nov 24
In Stock
Get 35 by Tue, Nov 24
Compare
Product Image of Multi Purpose Synthetic Grease Cartridge (14 oz.)
Multi Purpose Synthetic Grease Cartridge (14 oz.)
SKU: 41150-SUPER-LUBE
Super Lube
SKU: 41150-SUPER-LUBE
Brand: Super Lube
$24.49 each
In Stock
Get 33 by Tue, Nov 24
In Stock
Get 33 by Tue, Nov 24
Compare
Product Image of 24" x 12" (Wall Opening Size) White Sidewall/Ceiling Return Air Grille (672 Series)
$26.96 each
In Stock
Get 10 by Wed, Nov 25
In Stock
Get 10 by Wed, Nov 25
Compare
Product Image of 1/2" x 600" Copper Guard Anti-Seize Thread Sealing Tape
$13.99 each
In Stock
Get 16 by Tue, Nov 24
In Stock
Get 16 by Tue, Nov 24
Compare
Product Image of 3/4" ZoomLock MAX Press Jaw for M12 FORCE Logic Press Tools
$329.00 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of ZERO VOC Eco-Friendly PTFE Thread Sealant (4 oz.)
ZERO VOC Eco-Friendly PTFE Thread Sealant (4 oz.)
SKU: 76040
Blue Monster
SKU: 76040
Brand: Blue Monster
$10.78 each
In Stock
Get 9 by Fri, Nov 27
In Stock
Get 9 by Fri, Nov 27
Compare
Product Image of RG128 Fan (USA), 87182261840
RG128 Fan (USA), 87182261840
SKU: 87182261840
Bosch
SKU: 87182261840
Brand: Bosch
(2)
$887.14 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Articles
More About Wilo Z-15 Pump Parts

Wilo Z-15 pump parts are the replacement components contractors use to service and rebuild Z-15 wet-rotor circulator pumps found in residential and light commercial hydronic heating and hot water recirculation systems. The Z-15 is a single-speed, in-line circulator, and its most commonly replaced parts are the pump head, rotor and impeller assembly, and the mounting gaskets that seal the pump body to the piping flanges. Over years of continuous operation, mineral buildup and worn bearings inside the wet-rotor cartridge are the usual reasons a Z-15 needs a rebuild rather than a full replacement. Keeping gaskets, cartridges, and mounting hardware on hand lets a contractor return a system to service the same day instead of waiting on a full pump swap, which matters most on boiler systems where extended downtime affects a building's heat.

Subcategories

  • Pump Heads: Pump heads house the motor and electrical connections for the Z-15 circulator and bolt directly onto the wet-rotor cartridge below. Contractors replace a pump head when the motor windings fail or a bad capacitor stops the rotor from starting, rather than swapping the entire unit. Because the head separates from the wet end without draining the whole system in most installations, it's often the fastest single-part repair on a Z-15. Matching the voltage and speed rating to the original nameplate keeps the replacement head compatible with the existing wiring.
  • Rotor & Impeller Assemblies: The rotor and impeller assembly is the wet-rotor cartridge that spins inside the pump body to move water through the system. Mineral scale and sediment are the most common causes of a sluggish or seized rotor, especially in older cast iron hydronic loops. Replacing the assembly restores full flow without needing to replace the pump housing or motor head. A worn sleeve bearing inside the assembly is usually what causes the humming or grinding noise contractors hear before a Z-15 fails outright.
  • Mounting Gaskets & Flanges: Mounting gaskets seal the pump body against the flanges that connect it to the supply and return piping. A worn or improperly seated gasket is one of the most common sources of a slow weep leak at the pump union. Flanges themselves rarely need replacement unless they've been damaged during a prior installation or corroded from years of exposure to boiler water. Keeping the correct gasket size on hand avoids a return trip when a routine pump service uncovers a leak at the union.
  • Cartridge Seal Kits: Cartridge seal kits bundle the O-rings and shaft seals needed to reseal the wet-rotor cartridge after it's opened for cleaning or bearing replacement. Using a complete kit instead of individual seals reduces the chance of missing a small O-ring that causes a repeat callback. Seal kits are typically sized to the specific cartridge generation, so matching the kit to the pump's production era matters more than matching it to the overall Z-15 model name alone. A fresh seal kit is standard practice any time the cartridge is removed for service, even if the old seals look intact.
  • Buying Guide

    When sourcing Wilo Z-15 pump parts, start with the failure symptom rather than guessing at a full parts list. A pump that hums but doesn't spin usually points to a seized rotor or worn bearing, calling for a rotor and impeller assembly rather than a new pump head. A pump that won't start electrically, or trips a breaker, more often points to the motor windings or capacitor inside the pump head itself. Confirm the exact age and cartridge generation of the installed unit before ordering, since Wilo has updated the internal cartridge design over the years and parts from a newer cartridge don't always fit an older pump body. For jobs where the pump has been in continuous service for many years, rebuilding with a full cartridge seal kit alongside the rotor assembly is often more efficient than replacing components piecemeal, since it addresses wear across the whole wet end in one visit. Keep a small stock of the most commonly needed Wilo Z-15 pump parts, gaskets, seal kits, and a spare pump head, on hand for routine hydronic service calls, since these are the components most likely to fail from years of continuous operation. For a pump that's failed catastrophically or is several rebuilds in already, replacing the entire unit is often the more practical long-term choice over continuing to source individual parts.

    Frequently Asked Questions

    How do I know if my Wilo Z-15 needs a new pump head or a full rotor assembly?

    If the pump is silent and doesn't spin at all, check the motor head first, since that usually points to a failed capacitor or burned winding. If the pump hums or vibrates but the rotor won't turn, the wet-rotor cartridge itself is more likely the problem. Testing continuity at the motor terminals before ordering parts helps confirm which component actually failed.

    Can I rebuild a Z-15 without draining the whole heating system?

    In most installations, the pump head separates from the wet-rotor cartridge without opening the main piping, so a motor swap doesn't require draining the loop. Replacing the cartridge, gaskets, or flanges does require isolating and draining the pump section, though the rest of the system can often stay filled if isolation valves are present. Always confirm the specific installation has isolation valves before promising a no-drain repair.

    Why does my Z-15 keep leaking at the union even after a new gasket?

    A repeat leak after a gasket replacement is usually a sign the flange itself is corroded, warped, or wasn't torqued evenly during installation. Overtightening a new gasket can also distort it and cause the same leak to return. Checking the flange surface for pitting and torquing bolts in a cross pattern typically resolves a recurring union leak.

    How long does a Z-15 cartridge seal kit typically last?

    Seal life depends heavily on water quality and how often the system cycles, so there's no single fixed interval for every installation. Systems with harder water or more mineral content tend to wear seals faster than closed loops with treated water. Replacing the seal kit any time the cartridge is opened for service, rather than waiting for a visible leak, helps avoid a repeat callback.

    Is it worth rebuilding an older Z-15 or should I replace the whole pump?

    A rebuild makes sense when the pump body and flanges are still in good condition and only the wet-rotor cartridge or motor head has failed. Once a pump has needed several rebuilds over a short period, or the housing itself shows corrosion, replacing the entire unit is usually the more practical option. Weighing the age of the installation against the parts already on hand helps make that call quickly during a service visit.