Apply to be a TradeMaster!
Filter menu expanded

Filters

460,971 items
Reset

SORT

Wilo Z-15 Pump Parts

Help Face
Need a little help?
460971 items
Grid
List
Compare
Product Image of 5/8" Refrigerant Copper Press 45° Elbow, 3081101000111
$35.20 each
In Stock
Get 32 by Tue, Nov 24
In Stock
Get 32 by Tue, Nov 24
Compare
Product Image of 64, Float Type Low Water Cut-Off - (Steam or Water)
$643.57 each
In Stock
Get 20 by Tue, Nov 24
In Stock
Get 20 by Tue, Nov 24
Compare
Product Image of 250 ft. - 16/4 Stranded Bare Copper Mini Split Cable (Black)
$313.59 each
In Stock
Get 4 by Wed, Nov 25
In Stock
Get 4 by Wed, Nov 25
Compare
Product Image of 2" NPT Industrial Gas Valve w/ On-off safety shut-off
2" NPT Industrial Gas Valve w/ On-off safety shut-off
SKU: V5055A1038
Honeywell
SKU: V5055A1038
Brand: Honeywell
(1)
$671.83 each
In Stock
Get 9 by Tue, Nov 24
In Stock
Get 9 by Tue, Nov 24
Compare
Product Image of 1" PVC Sch. 40 Repair Coupling (Soc x Soc - PVC White with EPDM O-ring)
$11.18 each
BOX UP & SAVE 7%
$207.00 box of 20
$10.35 each
In Stock
Get 19 by Tue, Nov 24
In Stock
Get 19 by Tue, Nov 24
Compare
Product Image of Gasket Housing Drain, 339805-401
Gasket Housing Drain, 339805-401
SKU: 339805-401
Carrier
SKU: 339805-401
Brand: Carrier
$1.96 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 1-1/2" Sweat PRO-PAL Full Port Ball Valve w/ Drain
$103.60 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 5 Piece Switchblade Selfeed Bit Plumber's Kit
$193.56 each
In Stock
Get 1 by Tue, Nov 24
In Stock
Get 1 by Tue, Nov 24
Compare
Product Image of GH-1 - 1" MNPT x 3/4" GHT PVC Garden Hose Adapter for Sump Pump, Pool Pump, and Utility Pump
$14.26 each
BOX UP & SAVE 10%
$76.74 box of 6
$12.79 each
In Stock
Get 11 by Tue, Nov 24
In Stock
Get 11 by Tue, Nov 24
Compare
Product Image of Single-Pole, LIT WHEN ON Pilot Light Toggle Switch, 20A - Red (120V)
$23.62 each
In Stock
Get 18 by Tue, Nov 24
In Stock
Get 18 by Tue, Nov 24
Compare
Product Image of PROTECH Foam Insulation Tape, 86-2800
PROTECH Foam Insulation Tape, 86-2800
SKU: 86-2800
Rheem
SKU: 86-2800
Brand: Rheem
$15.51 each
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Backorder
Get it by Wed, Dec 23 - Tue, Jan 26
Compare
Product Image of 3 Phase SPDT Universal Line & Load Side Voltage Monitor (190-480V)
$250.31 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of Pressure Switch -0.70"WC, 632432R
Pressure Switch -0.70"WC, 632432R
SKU: 632432R
Nordyne
SKU: 632432R
Brand: Nordyne
(8)
$42.16 each
In Stock
Get 17 by Tue, Nov 24
In Stock
Get 17 by Tue, Nov 24
Compare
Product Image of 1" ProPress FTG x Male Street Bronze Adapter (Lead Free)
$43.53 each
In Stock
Get 22 by Tue, Nov 24
In Stock
Get 22 by Tue, Nov 24
Compare
Product Image of 208V Motor, 3/4HP 1075RPM, HC45AQ230
208V Motor, 3/4HP 1075RPM, HC45AQ230
SKU: HC45AQ230
Carrier
SKU: HC45AQ230
Brand: Carrier
$494.47 each
In Stock
Get 2 by Tue, Nov 24
In Stock
Get 2 by Tue, Nov 24
Compare
Product Image of Temperature Control (160° Open, 130° Close), S1-02529041004
Temperature Control (160° Open, 130° Close), S1-02529041004
SKU: S1-02529041004
York
SKU: S1-02529041004
Brand: York
(1)
$78.60 each
In Stock
Get 27 by Tue, Nov 24
In Stock
Get 27 by Tue, Nov 24
Compare
Product Image of 850-1020 MFD Round Start Capacitor (110/125V)
$19.18 each
In Stock
Get 18 by Tue, Nov 24
In Stock
Get 18 by Tue, Nov 24
Compare
Product Image of Brass Cylinder Adapters, CGA-520 B Tank Acetylene To CGA-200 Commercial Acetylene
$15.72 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of T-232 3" High Definition "C" Cutter for K-50 Drain Cleaning Machine
$31.23 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 24 VAC 1 Pole PowerPro Deluxe Economy Definite Purpose Contactor (30 A), DPL1030A1001
$18.10 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 1-Gang Dry-Tite Blank Weatherproof Receptable Cover, Device Mount (Silver)
$2.18 each
BOX UP & SAVE 11%
$38.60 box of 20
$1.93 each
In Stock
Get 66 by Tue, Nov 24
In Stock
Get 66 by Tue, Nov 24
Compare
Product Image of 1-1/4" PVC Schedule 80 90-Degree Street Elbow (Spigot x Socket)
$7.02 each
BOX UP & SAVE 9%
$159.75 box of 25
$6.39 each
In Stock
Get 17 by Tue, Nov 24
In Stock
Get 17 by Tue, Nov 24
Compare
Product Image of Bath & Dryer Rooftop Appliance Vent (Black), BDV4BL
$78.95 each
In Stock
Get 17 by Wed, Nov 25
In Stock
Get 17 by Wed, Nov 25
Compare
Product Image of 2" No Hub Cast Iron Shower Drain w/ Clamp Ring and Bolts
$32.98 each
In Stock
Get 15 by Tue, Nov 24
In Stock
Get 15 by Tue, Nov 24
Compare
Product Image of 3' Flexicore Closet Auger w/ Down Head (Individually Boxed)
$65.68 each
In Stock
Get 6 by Tue, Nov 24
In Stock
Get 6 by Tue, Nov 24
Compare
Product Image of Non-Metallic Floor Box for Installed Floors w/ Two Flip Lids (Brown)
$21.03 each
BOX UP & SAVE 6%
$79.04 box of 4
$19.76 each
In Stock
Get 25 by Tue, Nov 24
In Stock
Get 25 by Tue, Nov 24
Compare
Product Image of Rust Buster
Rust Buster
SKU: MO44
Supco
SKU: MO44
Brand: Supco
$9.48 each
In Stock
Get 10 by Tue, Nov 24
In Stock
Get 10 by Tue, Nov 24
Compare
Product Image of 1/4" x 1/8" NPTF Male Connector (Polypropylene)
$1.79 each
BOX UP & SAVE 9%
$16.20 box of 10
$1.62 each
In Stock
Get 31 by Tue, Nov 24
In Stock
Get 31 by Tue, Nov 24
Compare
Product Image of Repair Kit for 720A (1/2" - 1")
Repair Kit for 720A (1/2" - 1")
SKU: RK1-720A
Zurn
SKU: RK1-720A
Brand: Zurn
(9)
$81.99 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 1-1/4" to 3" Round Universal Master Flash for Metal Roofs, Model #2 (Black EPDM)
$10.61 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 7/8" x 3/4" Swage Reducer
7/8" x 3/4" Swage Reducer
SKU: SWUN7834
SmartLock
SKU: SWUN7834
Brand: SmartLock
$80.00 each
In Stock
Get 7 by Fri, Nov 27
In Stock
Get 7 by Fri, Nov 27
Compare
Product Image of 1/2" Sweat Connection 3 Way Zone Valve, Port A Normally Closed (120v)
$155.46 each
In Stock
Get 28 by Tue, Nov 24
In Stock
Get 28 by Tue, Nov 24
Compare
Product Image of Blower Assembly - Includes Motor, Blower Wheel, & Mounting Plate
$94.50 each
In Stock
Get 3 by Tue, Nov 24
In Stock
Get 3 by Tue, Nov 24
Compare
Product Image of 1" Press 2-Way Zone Valve w/ Screw Terminals, 7.5 Cv (24V)
$211.80 each
In Stock
Get 39 by Tue, Nov 24
In Stock
Get 39 by Tue, Nov 24
Compare
Product Image of Cover Gasket for A and B Mini Pumps
Cover Gasket for A and B Mini Pumps
SKU: 3779901
Suntec
SKU: 3779901
Brand: Suntec
$1.60 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 1" x 10 ft. Type M Straight Copper Pipe
Add-on Item
1" x 10 ft. Type M Straight Copper Pipe
SKU: 100-100-MCP
Mueller Industries
SKU: 100-100-MCP
$83.73 each
Out of Stock
Get it by Thu, Dec 10 - Mon, Dec 21
Out of Stock
Get it by Thu, Dec 10 - Mon, Dec 21
Compare
Product Image of 1" PEX Expansion Dual Check Backflow Preventer (ASSE 1024 Compliant)
$79.68 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of Blower Housing Assembly Kit for GV Boilers, 382-200-340
$863.30 each
In Stock
Get 16 by Tue, Nov 24
In Stock
Get 16 by Tue, Nov 24
Compare
Product Image of Torsion Flex Direct Drive Blower Motor, 1075 RPM, 1/2 HP (115V)
$195.78 each
In Stock
Get 8 by Tue, Nov 24
In Stock
Get 8 by Tue, Nov 24
Compare
Product Image of 3" x 2' Round Metal Duct Pipe - 26 Gauge
$8.21 each
In Stock
Get 25 by Wed, Nov 25
In Stock
Get 25 by Wed, Nov 25
Compare
Product Image of 2-1/2" X 6" Stainless Steel Pipe Repair Clamp
2-1/2" X 6" Stainless Steel Pipe Repair Clamp
SKU: RCS250-600
Bluefin
SKU: RCS250-600
Brand: Bluefin
(10)
$10.69 each
BOX UP & SAVE 12%
$225.84 box of 24
$9.41 each
In Stock
Get 77 by Tue, Nov 24
In Stock
Get 77 by Tue, Nov 24
Compare
Product Image of 5-ASP-LL 1/6 HP, 1500 GPH - Submersible Utility Pump w/ Piggyback Diaphragm Switch & 18 ft. Power Cord
$247.94 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of On/Off Valve for 1-1/4" & 1-1/2" Mr. Pex Brass Manifolds
$10.20 each
In Stock
Get 12 by Tue, Nov 24
In Stock
Get 12 by Tue, Nov 24
Compare
Product Image of R32 Union x 1-1/4" BSP Male Manifold Elbow Union
$23.87 each
In Stock
Get 7 by Tue, Nov 24
In Stock
Get 7 by Tue, Nov 24
Compare
Product Image of 3" Schedule 40 HangsTuff Swivel J-Hook Tube Hanger
$1.92 each
In Stock
Get 520 by Tue, Nov 24
In Stock
Get 520 by Tue, Nov 24
Compare
Product Image of 950/9 Hex-Plus Imperial 2 9-Piece L-Key Set w/ BlackLaser Surface Treatment (Multicolor)
$46.99 each
In Stock
Get 5 by Tue, Nov 24
In Stock
Get 5 by Tue, Nov 24
Compare
Product Image of Two-Wire Kit
Two-Wire Kit
SKU: ACC0436
Venstar
SKU: ACC0436
Brand: Venstar
(14)
$27.39 each
In Stock
Get 4 by Tue, Nov 24
In Stock
Get 4 by Tue, Nov 24
Compare
Product Image of 1-1/2" x 3/4" x 1-1/2" CxCxC Reducing Tee
$55.31 each
In Stock
Get 14 by Tue, Nov 24
In Stock
Get 14 by Tue, Nov 24
Resources
FAQs, Manuals & Videos
Articles
More About Wilo Z-15 Pump Parts

Wilo Z-15 pump parts are the replacement components contractors use to service and rebuild Z-15 wet-rotor circulator pumps found in residential and light commercial hydronic heating and hot water recirculation systems. The Z-15 is a single-speed, in-line circulator, and its most commonly replaced parts are the pump head, rotor and impeller assembly, and the mounting gaskets that seal the pump body to the piping flanges. Over years of continuous operation, mineral buildup and worn bearings inside the wet-rotor cartridge are the usual reasons a Z-15 needs a rebuild rather than a full replacement. Keeping gaskets, cartridges, and mounting hardware on hand lets a contractor return a system to service the same day instead of waiting on a full pump swap, which matters most on boiler systems where extended downtime affects a building's heat.

Subcategories

  • Pump Heads: Pump heads house the motor and electrical connections for the Z-15 circulator and bolt directly onto the wet-rotor cartridge below. Contractors replace a pump head when the motor windings fail or a bad capacitor stops the rotor from starting, rather than swapping the entire unit. Because the head separates from the wet end without draining the whole system in most installations, it's often the fastest single-part repair on a Z-15. Matching the voltage and speed rating to the original nameplate keeps the replacement head compatible with the existing wiring.
  • Rotor & Impeller Assemblies: The rotor and impeller assembly is the wet-rotor cartridge that spins inside the pump body to move water through the system. Mineral scale and sediment are the most common causes of a sluggish or seized rotor, especially in older cast iron hydronic loops. Replacing the assembly restores full flow without needing to replace the pump housing or motor head. A worn sleeve bearing inside the assembly is usually what causes the humming or grinding noise contractors hear before a Z-15 fails outright.
  • Mounting Gaskets & Flanges: Mounting gaskets seal the pump body against the flanges that connect it to the supply and return piping. A worn or improperly seated gasket is one of the most common sources of a slow weep leak at the pump union. Flanges themselves rarely need replacement unless they've been damaged during a prior installation or corroded from years of exposure to boiler water. Keeping the correct gasket size on hand avoids a return trip when a routine pump service uncovers a leak at the union.
  • Cartridge Seal Kits: Cartridge seal kits bundle the O-rings and shaft seals needed to reseal the wet-rotor cartridge after it's opened for cleaning or bearing replacement. Using a complete kit instead of individual seals reduces the chance of missing a small O-ring that causes a repeat callback. Seal kits are typically sized to the specific cartridge generation, so matching the kit to the pump's production era matters more than matching it to the overall Z-15 model name alone. A fresh seal kit is standard practice any time the cartridge is removed for service, even if the old seals look intact.
  • Buying Guide

    When sourcing Wilo Z-15 pump parts, start with the failure symptom rather than guessing at a full parts list. A pump that hums but doesn't spin usually points to a seized rotor or worn bearing, calling for a rotor and impeller assembly rather than a new pump head. A pump that won't start electrically, or trips a breaker, more often points to the motor windings or capacitor inside the pump head itself. Confirm the exact age and cartridge generation of the installed unit before ordering, since Wilo has updated the internal cartridge design over the years and parts from a newer cartridge don't always fit an older pump body. For jobs where the pump has been in continuous service for many years, rebuilding with a full cartridge seal kit alongside the rotor assembly is often more efficient than replacing components piecemeal, since it addresses wear across the whole wet end in one visit. Keep a small stock of the most commonly needed Wilo Z-15 pump parts, gaskets, seal kits, and a spare pump head, on hand for routine hydronic service calls, since these are the components most likely to fail from years of continuous operation. For a pump that's failed catastrophically or is several rebuilds in already, replacing the entire unit is often the more practical long-term choice over continuing to source individual parts.

    Frequently Asked Questions

    How do I know if my Wilo Z-15 needs a new pump head or a full rotor assembly?

    If the pump is silent and doesn't spin at all, check the motor head first, since that usually points to a failed capacitor or burned winding. If the pump hums or vibrates but the rotor won't turn, the wet-rotor cartridge itself is more likely the problem. Testing continuity at the motor terminals before ordering parts helps confirm which component actually failed.

    Can I rebuild a Z-15 without draining the whole heating system?

    In most installations, the pump head separates from the wet-rotor cartridge without opening the main piping, so a motor swap doesn't require draining the loop. Replacing the cartridge, gaskets, or flanges does require isolating and draining the pump section, though the rest of the system can often stay filled if isolation valves are present. Always confirm the specific installation has isolation valves before promising a no-drain repair.

    Why does my Z-15 keep leaking at the union even after a new gasket?

    A repeat leak after a gasket replacement is usually a sign the flange itself is corroded, warped, or wasn't torqued evenly during installation. Overtightening a new gasket can also distort it and cause the same leak to return. Checking the flange surface for pitting and torquing bolts in a cross pattern typically resolves a recurring union leak.

    How long does a Z-15 cartridge seal kit typically last?

    Seal life depends heavily on water quality and how often the system cycles, so there's no single fixed interval for every installation. Systems with harder water or more mineral content tend to wear seals faster than closed loops with treated water. Replacing the seal kit any time the cartridge is opened for service, rather than waiting for a visible leak, helps avoid a repeat callback.

    Is it worth rebuilding an older Z-15 or should I replace the whole pump?

    A rebuild makes sense when the pump body and flanges are still in good condition and only the wet-rotor cartridge or motor head has failed. Once a pump has needed several rebuilds over a short period, or the housing itself shows corrosion, replacing the entire unit is usually the more practical option. Weighing the age of the installation against the parts already on hand helps make that call quickly during a service visit.