FloodStop is a manufacturer of automatic leak detection and water shut-off systems for residential and light commercial plumbing applications. FloodStop is a brand of IPS Corp, a manufacturer of specialty plumbing products. FloodStop systems combine a floor-level moisture sensor with a motorized ball valve. The valve automatically shuts off the water supply to a protected appliance or fixture the moment the sensor detects a leak. An audible alarm sounds simultaneously with the valve closure, alerting occupants to the leak condition. FloodStop systems are available in configurations for water heaters, washing machines, dishwashers, toilets, water filters, and ice makers, covering the most common appliance leak sources in residential buildings. Plumbing contractors, property managers, and homeowners specify FloodStop where automatic leak protection is required to prevent water damage from appliance or fixture supply line failures.
FloodStop Product Lines
Water Heater Auto-Shut-Off Kits
FloodStop water heater kits provide automatic shut-off at the cold-water inlet of a tank or tankless water heater when a floor-level leak is detected. Kits are available in 3/4" NPT and 1-1/2" NPT male-by-female in-line valve configurations to match standard residential water heater inlet pipe sizes. The motorized ball valve installs in the cold-water supply line; the floor sensor is placed at the base of the water heater in the drain pan. When the sensor detects moisture, the valve closes automatically and the alarm sounds. The FloodStop V4 controller manages the valve and sensor interface and can integrate with a Sensaphone or home security system for remote notification. Water heater kits from FloodStop address one of the highest-value water damage loss scenarios in residential buildings.
Washing Machine Shut-Off Systems
FloodStop washing machine shut-off systems protect against supply hose failures and internal washing machine leaks. These are among the most common sources of catastrophic water damage in residential laundry areas. FloodStop washing machine systems include motorized ball valves at both hot and cold supply connections. A floor sensor is placed in the washing machine drain pan or at the base of the machine. When the sensor detects moisture, both supply valves close simultaneously to stop the flow from either supply line. Washing machine water damage can occur rapidly from a ruptured hose; the FloodStop washing machine system provides automatic shut-off without requiring occupant intervention.
Small Appliance and Fixture Kits
FloodStop small appliance kits provide automatic shut-off for dishwashers, toilets, water filters, and ice makers. They use 3/8" and 1/4" in-line ball valve configurations matched to the standard supply line connections on these appliances and fixtures. Dishwasher and toilet supply lines use 3/8" compression inlet fittings; ice maker and water filter connections use 1/4" tubing connections. FloodStop provides model-specific kits for each appliance type. The same automatic shut-off technology used in the water heater and washing machine kits applies to these smaller supply connections. Small appliance kits extend that protection to individual supply connections throughout a residence.
Why Contractors Specify FloodStop
Plumbing contractors and property managers specify FloodStop systems for automatic leak detection and shut-off. Stopping the flow early prevents the extended water exposure that causes the most costly water damage claims in residential properties. A FloodStop system closes the supply valve and sounds an alarm within seconds of sensor activation, stopping the flow before significant damage occurs. FloodStop kits are available for the appliances and fixtures with the highest leak damage potential: water heaters, washing machines, dishwashers, and toilets. The FloodStop V4 controller integrates with Sensaphone monitoring and standard home security systems for remote notification when the system activates. FloodStop kits are available in configurations for the appliance supply pipe sizes described on this page.
How to Choose a FloodStop Product
The primary selection variable for a FloodStop system is the appliance or fixture being protected. FloodStop offers application-specific kits for these appliances. Water heater kits use 3/4" or 1-1/2" NPT valves. Washing machine kits use separate hot and cold valves. Dishwasher and toilet kits use 3/8" compression. Ice maker and water filter kits use 1/4" tubing. Match the FloodStop kit to the supply connection size on the appliance or fixture.
The second variable is sensor placement. The FloodStop floor sensor must be placed where the first water from a leak will accumulate. Typical locations are the water heater drain pan, the washing machine drain pan, or the lowest point of the appliance enclosure. Confirm the sensor cable is long enough to reach from the valve body to the sensor placement point before installation.
The third variable is notification integration. The FloodStop V4 controller includes terminals for connection to a Sensaphone monitoring system or a standard home security system dry contact input. For properties with existing security or monitoring systems, confirm the controller output type matches the monitoring system input requirements before specifying.
Frequently Asked Questions
Who manufactures FloodStop products?
FloodStop is a brand of IPS Corp, a manufacturer of specialty plumbing products.
Which appliances can FloodStop systems protect?
FloodStop systems are available in configurations for water heaters, washing machines, dishwashers, toilets, water filters, and ice makers. Each system pairs a floor-level moisture sensor with a motorized ball valve sized for the appliance supply connection.
What is the difference between FloodStop water heater kits and washing machine kits?
The difference between FloodStop water heater kits and washing machine kits is the valve size and supply line configuration. Water heater kits include a single 3/4" or 1-1/2" NPT in-line valve for the cold water supply inlet. Washing machine kits include two separate valves for both hot and cold supply connections, closing both lines simultaneously when a leak is detected. Both kits use a floor-level moisture sensor to trigger valve closure.
How quickly does FloodStop close the water supply valve when a leak is detected?
FloodStop motorized ball valves close automatically when the floor sensor detects moisture. Valve closure occurs within seconds of sensor activation. The audible alarm sounds simultaneously with valve closure.
Can FloodStop integrate with a home security system?
The FloodStop V4 controller includes output terminals for integration with Sensaphone monitoring systems and standard home security systems that accept a dry contact input. When the FloodStop system activates, the controller output can trigger a remote alert through the connected monitoring or security system. Confirm the controller output type matches the monitoring system input requirements before installation.
What size valve does the FloodStop water heater kit use?
FloodStop water heater kits are available in 3/4" NPT and 1-1/2" NPT male-by-female in-line valve configurations. The 3/4" kit suits the standard 3/4" cold water inlet found on most residential tank water heaters. The 1-1/2" kit suits larger water heaters with 1-1/2" inlet connections. Match the kit valve size to the cold water supply inlet connection size on the water heater being protected.