Lau Blower Wheels are double inlet replacement wheels for belt drive heating and air conditioning blowers, with listed sizes that include 9-1/2 inch, 10-5/8 inch, 12-5/8 inch, and 15 inch diameters. The 15 inch model with an A Series belt drive and 1 inch bore is a galvanized, universal replacement Preslok wheel with two hubs for CW or CCW rotation. On that wheel, each blade is mechanically attached to the center disc by four steel fingers pressed through the hole in the blade for a positive locking action. Bore sizes on the listed wheels run from 3/4 inch to 1 inch, and every wheel shown lists CW/CCW rotation. A 9-1/2 inch model is also listed with a 3300 RPM rating. Diameter, bore, and rotation all have to match the original wheel, so a correct match on the first order keeps a blower repair from turning into a second trip.
Subcategories
Buying Guide
Start with the original wheel. Measure its diameter, then check the bore, since the listed Lau wheels run from a 3/4 inch bore to a 1 inch bore. A wheel that matches on diameter but not on bore will not fit the shaft, so confirm both before ordering.
Next, confirm rotation. The wheels shown list CW/CCW rotation, and the 15 inch model has two hubs for CW or CCW rotation. Still, check the rotation of the failed wheel against the housing before installing.
Check the drive and speed. Four of the listed wheels are named for A Series belt drive, and one 9-1/2 inch model is listed at 3300 RPM. If the original wheel carries a speed rating, use it as a match point instead of relying on diameter alone.
Weigh construction too. The 15 inch galvanized Preslok wheel locks each blade to the center disc with four steel fingers, and its end rings are deep section with an airflow shaped center disc.
When comparing Lau Blower Wheels, record diameter, bore, rotation, and RPM from the old wheel and compare each against the listing. Several diameters are listed, so those four measurements settle the choice quickly. If the nameplate or markings are unreadable, confirm the specs with the equipment manufacturer before ordering.
Frequently Asked Questions
What bore sizes do Lau blower wheels come in?
Lau blower wheels in this listing include 3/4 inch and 1 inch bore models. The 15 inch and 12-5/8 inch models have a 1 inch bore, and the 10-5/8 inch and 9-1/2 inch models have a 3/4 inch bore. Check the bore on the old wheel before ordering.
Do Lau double inlet blower wheels work for CW and CCW rotation?
The Lau double inlet blower wheels shown all list CW/CCW rotation in their specs. The 15 inch model describes two hubs for CW or CCW rotation. Confirm the rotation of the old wheel before installing.
Is there a galvanized Lau blower wheel for belt drive units?
The 15 inch Lau double inlet blower wheel with A Series belt drive is described as a galvanized, universal replacement Preslok wheel. It has a 1 inch bore and two hubs for CW or CCW rotation. Check the specs on each product page for the other Lau blower wheel sizes.
Is there a Lau blower wheel rated for 3300 RPM?
Yes, the Lau 9-1/2 inch double inlet blower wheel with belt drive is listed at 3300 RPM with a 3/4 inch bore. Its rotation is CW/CCW. Compare that rating against the original wheel before swapping it in.
How do I match a replacement Lau blower wheel to the old one?
Matching a Lau blower wheel starts with diameter, bore, and rotation. Measure the old wheel and compare each dimension against the product specs. Lau blower wheel listings show bore and rotation in the specs, and the diameter appears in the product name.